manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Inspire
  6. •
  7. Rack & Stand
  8. •
  9. Inspire FPC1 Installation and operating instructions

Inspire FPC1 Installation and operating instructions

This manual suits for next models

1

Other Inspire Rack & Stand manuals

Inspire Kilia GP9ACRZ40W User manual

Inspire

Inspire Kilia GP9ACRZ40W User manual

Inspire SFR1.1 User manual

Inspire

Inspire SFR1.1 User manual

Popular Rack & Stand manuals by other brands

Dynex DX-MP3MT Quick setup guide

Dynex

Dynex DX-MP3MT Quick setup guide

Konig & Meyer 24185 manual

Konig & Meyer

Konig & Meyer 24185 manual

ECG LD 326501 instruction manual

ECG

ECG LD 326501 instruction manual

Philips SB7S19S/00 quick start guide

Philips

Philips SB7S19S/00 quick start guide

Woodline KIT-250 lb instructions

Woodline

Woodline KIT-250 lb instructions

ricoo S1222 installation instructions

ricoo

ricoo S1222 installation instructions

Kanto P301 user manual

Kanto

Kanto P301 user manual

VidaBox VB MNT FFS2 installation guide

VidaBox

VidaBox VB MNT FFS2 installation guide

PROEL PLWIN60C user manual

PROEL

PROEL PLWIN60C user manual

AllMounts PLB-43S instruction manual

AllMounts

AllMounts PLB-43S instruction manual

VMP VH-001 instruction sheet

VMP

VMP VH-001 instruction sheet

Nederman SYSTEM 920/400 instruction manual

Nederman

Nederman SYSTEM 920/400 instruction manual

Glasdon ORBIS POST MOUNTING KIT installation guide

Glasdon

Glasdon ORBIS POST MOUNTING KIT installation guide

Songmics LGR105 manual

Songmics

Songmics LGR105 manual

Grape GM401 user manual

Grape

Grape GM401 user manual

FourStarGroup 11225296 manual

FourStarGroup

FourStarGroup 11225296 manual

CHIEF FLR100 installation instructions

CHIEF

CHIEF FLR100 installation instructions

FEC XDCAM EX PMW-EX30 manual

FEC

FEC XDCAM EX PMW-EX30 manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

PAGE 1
FPC1
FULL POWER CAGE
PAGE 2
FPC1 RACK- SH-G8901
ASSEMBLY & OWNER’S MANUAL
Toll-Free Customer Service
Number
1-877-738-1729
Mon. - Fri. 8 a.m. - 5 p.m.
PST
www.inspirefitness.com
BEFORE YOU BEGIN
Thank you for selecting the INSPIRE FPC1 RACK. For your safety and benefit, read this
manual carefully before using the machine. As a manufacturer, we are committed to
providing you complete customer satisfaction. If you have any questions, or find there are
missing or damaged parts, please call our TOLL-FREE customer service number. Our
Customer Service Agents will provide immediate assistance to you.
Table of Contents
BEFORE YOU BEGIN 1
IMPORTANT SAFETY NOTICE 3
PARTS LIST 4
EXPLODED VIEW 6
ASSEMBLY INSTRUCTIONS 7
REGULATORY INFORMATION/ SAFETY NOTICE 13
WARRANTY / DISCLAIMER 17
PAGE 3
IMPORTANT SAFETY NOTICE
Precautions
This exercise machine is built for optimum safety. However, certain precautions apply whenever you
operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or
operate your machine. Please note the following safety precautions:
1. Always keep children and pets away from the machine. DO NOT leave children
unattended in the same room with the machine. The linkages on this machine can cause
serious injury or death if used improperly.
2. Never place your hands or feet in the path of the linkages because injury may occur to
you or damage may occur to the equipment. Never allow children to come near or
approach the moving linkages while in use.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms,
STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the machine on an open and level surface.
5. DO NOT use the machine outdoors or near water.
6. Keep hands away from all moving parts.
7. Always wear appropriate workout clothing when exercising. DO NOT wear robes or
other clothing that could become caught in the machine. Running or aerobic shoes are
also required when using the machine.
8. Use the machine only for its intended use as described in this manual. DO NOT use
attachments not recommended by the manufacturer.
9. Do not place any sharp objects around the machine.
10. Disabled persons should not use the machine without a qualified person or physician in
attendance.
11. Before using the machine to exercise, perform stretching exercises to properly warm up.
12. Never operate if the machine is not functioning properly.
Care and Maintenance
1. Keep moving parts clean.
2. Inspect and tighten all parts before using the machine.
3. The Frame can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT
use solvents.
WARNING:
BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS
ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH
PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY
FITNESS EQUIPMENT. Health In Motion, LLC. DOES NOT ASSUME ANY
RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR
THROUGH THE USE OF THIS PRODUCT.
PAGE 4
PAGE 5
EXPLODED VIEW
PAGE 6
COMPONENTS LIST
7X 1
6X 1
18 X 1
9X 1
8X 1
10 X 1
11 X 1
16 X 4
23 X 2 17 X 10
14 X 1
PAGE 7
COMPONENTS LIST
13 X 4
4X 1
2X 2
40 X 2
12 X 2
15 X 4
5X 4
3X 1
1 X 2
PAGE 8
HARDWARE PACK
PAGE 9
STEP 1.
BOTTOM SUPPORT FRAME ASSEMBLY
Refer to the illustration above for location and orientation of components.
This step consists of a left side and a right side.
•Fasten with Bolt (28), Washer (36), and Locknut (35). Connect Bottom Foot Plate (15) to
Bottom Base Frame (1), Bottom Inner Plate (13), and the Bottom Cross Brace (14), place
these items towards the one end of the Bottom Base Frame.
•Repeat Step for the Opposite side.
•Fasten with Bolt (29), Washer (36), and Locknut (35). Connect Bottom Foot Plate (15) to
Bottom Base Frame (1), and Bottom Inner Plate (13), and the Bottom Cross Brace (14),
place these items towards the one end front of the Bottom Base Frame.
•Repeat Step for the Opposite side.
•Together, these Items form the Bottom support Assembly.
PAGE 10
STEP 2
Upright BeamS AND REAR CONNECTING FRAME INSTALLATION
Refer to the illustration above for location and orientation of components.
•Fasten with Bolt (28), at the bottom, Bolt (29) above, Washer (37), and Lock-Nut (35).
Connect Upright Beam (5) to the Bottom Support Frame Assembly. Left side and Right
side. (Refer to the illustration above for placement).
•Fasten with Bolt (29), Washer (36), and Lock-Nut (35). Connect the Rear Cross Bar(3) to
the Upright Beams (5) and fasten in place.