INTALED WP-4RGBWN User manual

4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.intalite.co.uk
V002-11-2019
The WP-4RGBWN wall panel enables control of 1 to 4 zones of RGB/RGBW LED strip, featuring a simple to
use back lit touch control slider for easy colour adjustment .
Product Description
Technical Specification
Controller
Order Code WP-4RGBWN
Type RF and DMX wall panel
Input Voltage AC85-265V
Operation Frequency 2.4GHz
Dimension 86x86x36.5mm (WxLxH)
• Easy control of RGB/RGBW LED strips for up to 4
zones independently or simultaneously
• Touch sensitive glass
• 5%-100% smooth dimming
• Backlit buttons for night time use
• Designed to fit into your existing switch back box
• DMX512 signal output for wired control of RGB/
RGBW DMX decoders
• Receiver Auto-Transmitting function to achieve
greater distances between receivers and the
remote
• Built-in dynamic play modes with receiver auto-
synchronization
Features
Order code R3C R4C DIM-DMX1CH(N)
Channels 3 (RGB) 4 (RGBW) 4 (RGBW)
Type RF receiver RF receiver DMX decoder
Input Voltage 12-24V DC 12-36V DC 12-24V DC
Current 3x4A 4x5A 4x5A
Output 3X(48-96W) 4X(60-180W) 4x(60-120)W
Note Constant
voltage
Constant
voltage Constant voltage
Dimension 33x97x18mm
(WxLxH)
45x175x27mm
(WxLxH)
50x170x23mm
(WxLxH)
R3C R4C DIM-DMX1CH(N)
Compatible RGB receivers and DMX decoders
Technical Specification
WP-4RGBWN

4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.intalite.co.uk
V002-11-2019
Controller layout
ZONE
ZONE
ZONE
ZONE
BRT/SPEED
WHITE
POWER
MODE
ON/OFF
Brightness
/ speed
Zones Play mode
RGB colour slide
White
BACKFRONT
AC INPUT L
AC INPUT N
WP-4RGBWN
DMX OUTPUT D+
DMX OUTPUT D-
DMX OUTPUT GND
LNGN DD+ D -
DM X OU TPUT
IN PU T
85-265VAC
86mm
86mm
45.5mm
59mm
35mm
62mm
11.5mm
Compatible
Back box types:
European style 86 size
Back box mounting
Wall panel Bracket Back box
Bracket removal

4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.intalite.co.uk
V002-11-2019
RGB Receiver wiring diagram
RGBW Receiver wiring diagram
R3C
RGB LED strip
Power supply
+
R4C
RGBW LED strip
Power supply
+
R
G
B
W

4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.intalite.co.uk
V002-11-2019
L
N
Power input
AC85-265V
Ppwer Supply
5-24VDC
LN
AC110-230V
Uin=12-36VDC Iin=20.5A
Uout=4×(12-36)VDC Iout=4×5A Pout=4×(60-180)W Temp Range: -30℃~+55℃
DMX512 & RDM De coder
DMX IN /OUT
D+ D- D+ D-
Ppwer Supply
5-24VDC
LN
AC110-230V
Uin=12-36VDC Iin=20.5A
Uout=4×(12-36)VDC Iout=4×5A Pout=4×(60-180)W Temp Range: -30℃~+55℃
DMX512 & RDM De coder
DMX IN /OUT
D+ D- D+ D-
DMX Signal
DMX Signal
LN
IN PUT
85 -26 5VAC
GN DD+ D -
DM X OUT PUT
WP-4RGBWN
W
W
RGBW LED stripRGBW LED strip
DIM-DMX1CH(N) DIM-DMX1CH(N)
DMX Decoder wiring diagram (RGBW)
Synchronising the remote to receiver
Match button
LED Indicator
R3C
Match button
LED indicator
Push -Dim
GND
R4C
1) Ensure the receiver has power. Press the match button on the receiver. LED Indicator will start flashing
slowly.

4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.intalite.co.uk
V002-11-2019
ZONE
ZONE
ZONE
ZONE
BRT/SPEED
WHITE
POWER
MODE
Press the zone
you wish to allocate
Troubleshoot
Problem Cause Corrective
No light • No power.
• Wrong connection or unsecure con-
nection.
• Check the power.
• Check the connection.
Wrong Colour • Wrong connection of RGB/W wires. • Retrace and reconnect RG-
B/W wires.
Uneven intensity
between front and
rear of the strip,
with voltage drop
• Output cable is too long.
• Cable diameter is too small.
• Overload beyond driver capability.
• Overload beyond receiver capability.
• Reduce cable or loop supply.
• Change to a thicker cable.
• Replace with a suitable high-
er power driver.
• Add a power repeater.
No response
from the remote
• The wall panel has no power.
• Beyond controllable distance.
• The controller isn’t synchronised with
the remote.
• Check the incoming supply
to the wall panel.
• Reduce remote to receiver
distance.
• Re-sync the remote.
2) Choose the zone you wish to allocate on the panel within 5 seconds after pressing the match button.
The LED indicator on the receiver will flash rapidly 5 times and then stop flashing. The controller is now
synchronised with the receiver.
3) Repeat the process to allocate zones for all
receivers.
Note! RF technology allows for greater flexibility when it comes to controlling simple or complex lighting installations
without the need of additional cabling. There are some limitations where installations have the receivers enclosed in
electrical boxes or hidden away in a ceiling , reducing the RF signal strength and therefore the communication range.
In order to overcome these RF Signal restrictions we suggest the following when synchronising our RF controllers and
receivers:
• Keep the distance within 10 meters from the controller to the receiver. The remote can operate up to 30 meters if
signal is uninterrupted by obstacles.
• When expanding your lighting, always try and use a signal repeater (PR-RGB(N)), where possible.
4) To restore the receiver to the factory default settings
and delete the allocated controller, press and hold the
match button on the receiver longer than 5 seconds
until the LED indicator flashes quickly 5 times.
MODE Starting Address/
1st Channel 2nd Channel 3rd Channel 4th Channel
RGB/RGBW Zone 1 001 002 003 004
RGB/RGBW Zone 2 005 006 007 008
RGB/RGBW Zone 3 009 010 011 012
RGB/RGBW Zone 4 013 014 015 016
R G B W Decoder Nr.
001 002 003 004 Decoder 1
005 006 007 008 Decoder 2
009 010 011 012 Decoder 3
013 014 015 016 Decoder 4
Addresses for the RGB / RGBW
mode when using multiple
decoders
Synchronising the wall panel to the DMX decoder
Address Setting in RGB/RGBW modes when using a single decoder:

4 Zone DMX and RF wall panel
for RGB and RGBW LED strip
www.intalite.co.uk
V002-11-2019
• Products must be installed and serviced by
qualified electrician.
• Please ensure the receiver is mounted in a
water proof enclosure if installed in an outdoor
environment, avoiding metallic enclosures.
• Always ensure products are mounted in areas
with adequate ventilation to avoid overheating.
• Please ensure outputs of any power suppliers
used in conjunction with this product comply
with its working voltage.
• Never install product whilst connected to power
and double check connections before switching
on to avoid short circuits.
Safety
Controlling your LED strip • ON/OFF: Turn ON/OFF LED strips on the last
setting.
• To adjust the colour, touch the RGB colour
slider.
• To change the brightness, press the
brightness button.
• Zones: When ON choose the Zones you
wish to control. When OFF short press Zone
to turn ON current Zone, long press for 2s to
turn OFF the desired Zone.
• Mode: Short press to run next mode, long
press 2s runs mode-cycle.
• W: Short press to turn ON/OFF W channel,
• Long press 1-5s for continuous 256 levels
adjustment of the white channel brightness.
ZONE
ZONE
ZONE
ZONE
BRT/SPEED
WHITE
POWER
MODE
ON/OFF
Brightness
/ speed
Zones Play mode
RGB colour slide
White
BACKFRONT
AC INPUT L
AC INPUT N
WP-4RGBWN
DMX OUTPUT D+
DMX OUTPUT D-
DMX OUTPUT GND
LNGN DD+ D -
DM X OU TP UT
INPUT
85-265VAC
86mm
86mm
45.5mm
59mm
35mm
62mm
11.5mm
Compatible
Back box types:
European style 86 size
Back box mounting
Wall panel Bracket Back box
Bracket removal
• There are 10 dynamic modes, press the play mode button to browse through modes. To choose the
mode, press and hold play mode for 2s.
• There are 10 speeds for the play modes. Press the speed button to browse through the speed levels
and to sync the receivers if out of sync.
• Press and hold the speed button to go to the highest speed level.
• To save your favourite setup, press and hold scene buttons.
• To recall saved setup, press scene button.
• You can save up to 4 scenes.
No. Name No. Name
1 RGB jump 6 RGB fade in and out
2 RGB smooth 7 Red fade in and out
3 6 color jump 8 Green fade in and out
4 6 color smooth 9 Blue fade in and out
5 Yellow Cyan purple smooth 10 White fade in and out
Dynamic play mode presets
INTALITE UK
148 - 154 Merton High Street;
London, SW19 1AZ, UK
Tel: [phone]
Fax: [phone]
www.intalite.co.uk
[e-mail]
Guarantee:
Full Terms & Conditions:
All LED and electrical components carry a 5 year
electrical guarantee, All lamps have their own average
life span. We recommend all products are installed by
NICEIC / registered electrical contractors, failure to do
so will result in any guarantee becoming void.
For our full terms and conditions please visit our
website - www.intalite.co.uk/terms-conditions