Inter-m RM-05A User manual

RM-05A
Remote Amp With Zone Selector

Remote Amp With Zone Selector
RM-05A is Remote Control Amplifier exclusively for PAM-Series.
With the Select Button for five regions, it can broadcast selectively. It outputs Chime
when broadcasting microphone. When not wanted, Chime can be simply removed
and high quality broadcasting is available through high sensitivity condenser
microphone.
FEATURES
OVERVIEW
RM-05
SPEAKER LINE CONTROL
CHIME AND TALK FUNCTION
OUTPUT LEVEL METER
MIC BROADCASTING
EXCLUSIVE USE FOR PAM-240A, PCT-610/620
MUTE FUCTION FORB CHIME OUT
1 I RM-01

Remote Amp With Zone Selector
 MIC INPUT JACK
 LEVEL CONTROL
Turn clockwise to increase and counter clockwise to
decrease the microphone volume level.
 POWER SWITCH
 OUTPUT LEVEL METER
Indicates the signal output level between –20dB and +10dB.
 ZONE/CHANNEL LED INDICATOR
Visual indication of the selected channel.
 ZONE/CHANNEL SELECTION SWITCH
Allows any combination of CH1-CH5 to be selected for
broadcast of voice messages.
 POWER LED
 CHIME/TALK SWITCH LED
Indicates when the chime talk switch is pressed.
 CHIME/TALK SWITCH
Used to broadcast to the selected channels. A pre-
announcement chime option is available by adjustment
of the internal jumper settings.
 ALL ZONE LED INDICATOR
Visual indication that all channels have been selected
for broadcast.
 ALL ZONE SELECTION SWITCH
Selects all channels for broadcast.
FRONT PANEL
RM-01 I 2




 






3 I RM-01
Remote Amp With Zone Selector
 REMOTE CONNECTION CABLE CONNECTOR
Used to connect the RM-05A to the host amplifier PAM-240A/360A, PCT-610/620.
※Refer to pin number as below
REAR PANEL

12345678
9
101112131415
Pin 1 Remote amplifier input signal hot (+)
Pin 2 Remote amplifier input signal cold (-)
Pin 3 Signal ground
Pin 4 Remote control 1 (SP1)
Pin 5 Remote control 2 (SP2)
Pin 6 Remote control 3 (SP3)
Pin 7 Remote control 4 (SP4)
Pin 8 Remote control 5 (SP5)
Pin 9 Remote control ground
Pin 10 DC +24V
Pin 11 Remote chime
Pin 12 NC
Pin 13 NC
Pin 14 NC
Pin 15 NC

RM-01 I 4
Remote Amp With Zone Selector
SPECIFICATIONS
RM-05A
Output Level/Impedance 1V±200mV(VR max/600Ω, BAL)
MIC Input Sensitivity/Impedance 0.8mV±0.3mV/600Ω, BAL
Frequency Response 120Hz~18kHz, ±3dB
THD Less than 0.7%
S/N Better than 55dB
Speaker Control Terminal
& Switch 5CH
Power Source DC 24V
Weight (Set) 800g (EXCEPT MICROPHONE)
Dimensions (Set) 194(W)×60(H)×205(D)mm

Memo

Memo

Inter-M Corp. (IMK)
719, Dobong-ro, Dobong-gu, Seoul, Korea
Overseas Sales Team
Tel_ [phone]~7 Fax_ [phone] E-mail_ [email protected] www.inter-m.com
※Design and specication are subject to be changed for the improvement of product quality without pre notice. 2015. 6. V1