Interlogix ACL870FL-PB User manual

© 2018 United Technologies Corporation. P/N 1073517A• REV 01.01 • ISS 27AUG18
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
ACL870FL-PB - Flush Mount RTE Push Button -
Installation Manual
Description / Operation
ACL870FL-PB has a remote relay control unit for use with the
ACL870FL-BS and the ACL870SU-BS biometric readers. If a
secure installation is needed, the biometric reader can be
connected to this ACL870FL-PB at secured area. It also plays
the role of exit push button. It has two relay outputs and two
RTE button inputs.
The connection between the biometric reader and this
ACL870FL-PB unit is done via RS485. Once the reader and
the remote relay unit are paired, the reader will use the relays
of the ACL870FL-PB..
Specifications
Supply voltage
9 to 14 VDC
Current requirements
65 mA at 12 VDC
Relay output
2x relay - 2A at 24 VDC
Buzzer
Yes, on touch
Push button input:
2
Door time:
Pulse (1 to 60 sec) or Toggle (ON/OFF)
Tamper
Yes, activated on frame removal
Backlight ON/OFF
Yes, by DIP switch
Panel connection
Terminal block
Material of design
housing
ABS
Dimensions of housing
(W x H x D)
80 x 80 x 9 mm
Operating environment
Temperature
Relative humidity
−20 to +50°C
0-95% noncondensing
IP rating
IP40
Color
-S = Silver, -G = Charcoal, -W = White
Weight shipping
Weight product
140 g
70 g
Mounting
Figure 1: Mounting instructions

2 / 4 P/N 1073517A• REV 01.01 • ISS 27AUG18
Application Diagram
Figure 2: Application diagram
ACL870FL-PB
2 Relay remote unit and
2 request-to-exit button inputs
Figure 3: Application Diagram

P/N 1073517A• REV 01.01 • ISS 27AUG18 3 / 4
Wiring
Figure 4: Wiring instructions
- Connect the door lock on the ACL870FL-PB relay
- The reader and the remote relay unit ACL870FL-PB should be connected with 4 wires: +, -, A and B (RS485). Max. 50 m.
Pairing reader with remote relay
Figure 5: Wiring instructions
1. Close the jumper. ACL870FL-PB beeps continuously and the red led blinks.
2. Open the jumper
3. Wait for beep + OK beep (short + short + long beep)
After the OK beep, the coupling is done.

4 / 4 P/N 1073517A• REV 01.01 • ISS 27AUG18
Regulatory information
Trademarks and
patents
The trade names used in this document may be
trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Manufacturer
Interlogix.
2955 Red Hill Avenue, Costa Mesa, CA 92626
5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
European Union
directives
This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable harmonized
European standards listed under the EMC
Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.
2013/56/EU & 2006/66/EC (battery directive):
This product contains a battery that cannot be
disposed of as unsorted municipal waste in the
European Union. See the product documentation
for specific battery information. The battery is
marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated
collection point. For more information see:
www.recyclethis.info.
Product warnings
and disclaimers
THESE PRODUCTS ARE INTENDED FOR
SALE TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY
CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY “AUTHORIZED
DEALER” OR “AUTHORIZED RESELLER”, IS
PROPERLY TRAINED OR EXPERIENCED TO
CORRECTLY INSTALL FIRE AND SECURITY
RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
www.firesecurityproducts.com/policy/product-
warning/ or scan the following code:
Contact
information and
manuals
For contact information go to: www.interlogix.com
or www.firesecurityproducts.com
To get translations for this and other product
manuals go to: www.firesecurityproducts.com