Intertek 4327FTB Installation guide

Gas Fire Pit Table
Assembly & Care instructions
Model:4327FTB
Please read & retain for future reference
5021119

ASSEMBLY PARTS
12

13
Parts List
Part Image Descripon Qty
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
2 Pcs
1 Pc
1 Pc
1 Pc
2 Pcs
A
B
C
D
E
F
G
H
I
J
K
L
Table Top
Right Side Panel
Le Side Panel
Rear Panel
Gas Cylinder Base
Door
Sffener Panel
Bracket
Caster
Burner
Burner Lid
Pull Ring

14
Image Descripon
M
N
O
P
Q
R
S
T
U
V
2 Pcs
2 Pcs
16 Pcs
4 Pcs
6 Pcs
22 Pcs
1 Pc
1 Pc
6 KGS
1 Pc
Parts List
Qty
Part
Bolt M4x6
Washer M1
Bolt M6x15
Bolt M6x35
Bolt M6x40
Washer M6
Allen Wrench
Knob
Glass Stones
Cover

WARNING:Failure to posion the parts in accordance with these diagrams or failure to use onlu parts
specificaly apprived with this appliance may result in property damage or personal injury.
15
1 Pc
1 Pc
2 Pcs
1 Pc
1 Pc
3 Pcs
Image Descripon Qty Part
M
N
O
P
Q
R
Extra
Bolt M4x6
Washer M1
Bolt M6x15
Bolt M6x35
Bolt M6x40
Washer M6
You can scan the QR code to watch the install video.

16
Step 1:Aach gas cylinder base(E) to door (F) using bolts(Q) and washers(R).
Install theknob(T)
Note:Please do not fully ghten bolts unl unit is fully assembled.
Step 2:Aach brackets(H) to gas cylinder base(E) and door (F) using bolts(O) and
washers(R).
NOTE:Please fully ghten all bolts at this me.
You can scan the QR code to watch the install video.

17
Step 3:Screw caster(I) to gas cylinder base(E).
Step 4:Aach right side panel(B) and le side panel(C) to table top(A) using bolts(O)
and washers(R).
Note:Please do not fully ghten bolts unl unit is fully assembled.
You can scan the QR code to watch the install video.

18
Step 5:Aach rear panel(D) to right side panel(B) and le side panel(C) using bolts(O)
and washers(R).
Note:Please do not fully ghten bolts unl unit is fully assembled.
Step 6:Aach sffener panel(G) to side panel(B) and le side panel(C) using bolts(P)
and washers(R).
NOTE:Please fully ghten all bolts at this me.
You can scan the QR code to watch the install video.

19
Step 7:Aach burner(J) to table top(A) using bolts(O).
NOTE:Please fully ghten all bolts at this me.
Step 8:Insert Door and gas cylinder base(E&F) into the guide rail and push it to the
end.
NOTE:Please pour the glass stones(U) into the burner at this me and place them
evenly.
You can scan the QR code to watch the install video.

20
Step 9:Aach pull ring (L) to burner lid (K) using bolts (M) and washers (N).
NOTE:We recommend the use of furniture covers to protect the pao fire pit when not
in use;
Please remove the wind guard before you use waterproof table cover.
You can scan the QR code to watch the install video.