InWin B1 User manual

User Manual

The B1’s extremely small footprint is perfect for
small form factor builds such as HTPCs, light
gaming PCs or even a LAN rig. The integrated
ventilation in the exquisite streamline design
provides a better thermal solution, and you can
set up your PC vertically or horizontally!
The B1 comes with prebuilt InWin 200W,
80 PLUS Gold PSU, InWin 80mm fan and an
anti-dust 󶇰lter. Use the B1 to match your
lifestyle!
Product Story

Speci󶇰cations
Model B1 B1 Pure B1 Mesh
Model Number IW-CS-
B1BLK-PS200W
IW-CS-
B1WHI-PS200W
IW-CS-
B1MESH-PS200W
Colors Black White Black
Case Materials Tempered
Glass, ABS Plywood, ABS SPCC, ABS
Case Type Mini-ITX Tower
M/B Compatibility Mini-ITX
Expansion Slots N/A
Maximum
Compatibility CPU Heatsink Height: 60 mm
Front Ports 1 x USB 3.2 Gen 1
HD Audio (CTIA – SPK/Mic)
Internal
Drive Bays 2 x 2.5"
Thermal Solution
Compatibility Side: 1 x 80 mm (1 InWin Fan Included)
Power Supply
Compatibility InWin 200W PSU Included
AC Input/E󶇲cient AC Input: 100 - 240V / 80 PLUS Gold
Product
Dimensions
(L x W x H)
302 x 238 x 108 mm
11.9 x 9.4 x 4.3"
Package
Dimensions
(L x W x H)
336 x 141 x 287 mm
13.2 x 5.6 x 11.3"
Net Weight 1.9 kg / 4.2 lbs 1.65 kg / 3.6 lbs 1.74 kg / 3.83 lbs
Gross Weight 2.2 kg / 4.9 lbs 1.95 kg / 4.3 lbs 2.07 kg / 4.56 lbs
* InWin's products comply with RoHS regulation.
* Speci󶇰cations may vary based on di󶇯erent regions.

Speci󶇰cations
Model IP-AD200C7-2
Total Power 200W
Material SECC
Type ITX
PFC Active PFC (> 0.95)
E󶇲ciency 80 PLUS® Gold (Up to 90%)
MTBF (Hours) > 100,000 hrs.
AC Input 100 – 240Vac. 50-60Hz
Operating Temperature
Range(° C) 0–40° C
Full Protection OVP / UVP / SCP / OPP
Safety Certi󶇰cations TUV / cTUVus / BSMI / CB / CE / FCC /
EAC / RCM / CCC
Dimensions (L x W x H) 52 x 40 x 170 mm
2.05 x 1.6 x 6.7"
Warranty 3 Years
Connectors
20+4 Pin Motherboard 1
8 (4+4) Pin CPU 1
8 (6+2) Pin PCI-E 0
4 Pin Peripheral 0
SATA (90 Degree) 1
Floppy 0
* InWin products comply with RoHS regulations.
* Speci󶇰cations may vary based on di󶇯erent regions.
InWin 200W 80PLUS GOLD PSU

Speci󶇰cations
Model DF0801512SELN
Fan Size 80 x 80 x 15 mm
Materials PBT
Rated Voltage DC 12V
Rated Power 2.16W
Rated Current 0.18A
Speed Mode PWM 600-2000 RPM
Air Flow 24.09 CFM
Air Pressure 1.08mm/ H2O
Connector 4-Pin
Noise Level 23.55 dB(A)
Bearing Type Long Lifespan Sleeve Bearing
* InWin products comply with RoHS regulations.
* Speci󶇰cations may vary based on di󶇯erent regions.
InWin 80mm Side Fans

1. B1 Mesh Chassis
2. InWin 200W 80 PLUS Gold PSU
3. InWin 80mm Side fan x 1
4. QR Code Card
5. Accessories Bag
1
2
4
5
3
Package Contents

a. Hexagon Head Screws X 8
b. 2.5” HDD Screws X 10
c. Cable Ties X 5
d. Foot-Stand Stickers X 4
a
d
c
b
Accessories Bag

1.SPCC
2. Logo
3. Power Button
4. HDD/Power LED indicator
5. 1 x USB 3.2 Gen 1
6. HD Audio Port (CTIA – SPK/Mic)
7. Removable Foot-stand
8. Release Panel
1
3
6
2
78
4
5
Case Structure

1. 2.5” Drive Bay
2. InWin 80mm Side Fan
3. Motherboard Mounting Area
4. InWin 200W 80 PLUS Gold PSU
5. Fan Dust Filter
1
3
2
4
5
Case Structure

Installation Guide
(Please follow the related chapters to assemble)
01
Opening the Chassis
Please release the three screws and lift up the top cover (yellow part).
Lift it from the two sides (green part).
02
Motherboard Installation
Parts Required: Hexagon Head Screws

03
Connection Cables
Switch/LED
Connector
HD Audio Header
USB 3.2 Header
Black(P_LED) 1
Black(P_LED) 3
Black(P_SW) 5
Black(P_SW) 7
Key 9
2 Black (HDD)
4 Black (HDD)
6 NC
8 NC
10 NC

Fan
SSD
Power

04
2.5” Drive Bays Installation
Parts Required: 2.5” HDD Screws
i. Release the two screws and
remove the bottom cover.
ii. Install the 2.5’’ HDD screws
on your SSD screw holes.
iii. Attach the SDD in the
designated area and push
towards the SATA direction.

04
How to Uninstall the 2.5” Drive Bays
i. Push the panel
ii. Pull towards the direction to
release it.

05
Foot-Stand Stickers Installation (Optional)
Note: After installed, the stickers will be hard to remove. Please use
wisely, we suggest using the chassis on vertical position for a better
look.
Parts Required: Foot-stand Stickers
i. Release the two screws and
remove the bottom cover.
ii. Release the screws of the
foot-stand and detach the
foot-stand.
iii. Place the stickers on each
designated area.

06
Completing Installation
*For more installation instructions, please
scan the QR Code or watch the video in the
website link:
https://youtu.be/cHm2nA2liQY

Notices and Warranty
■Notices
1. Please follow the user manual for installation guidelines.
2. When installing the computer components, please
use antistatic precautions to prevent ESD (electrostatic
discharge) damage. Failure to take the necessary
precautions may result in injury to the installer and/or
damage to the machine. Incorrect installation may
burnout the motherboard and other system components.
3. To avoid any damages, please do not use this product for
any other purpose than its intended use.
4. Any modi󶇰cations may damage the product.
5. Please handle with care when moving the case.
6. When storing the case, please keep this product away
from high temperatures. Keep away from machines such
as heaters that might cause high temperatures.
7. Please do not put anything in the impeller.
8. Please do not touch the fan blades when the fan is in
operation. Please only use your fan in the computer case.
■ Warranty
* For more detailed warranty information, please visit the
InWin retail website at www.in-win.com.
* The actual product is subject to change without prior
notice. In Win Development Inc. reserves the right to make
󶇰nal modi󶇰cations.

Copyright © 2022 In Win Development Inc. All Rights Reserved.