InWin IW-A1PLUS-BLACK User manual

User Manual

The A1 PLUS offers upgrades to the beloved A1 chassis.
The A1 PLUS retains its distinguished classy aesthetics
with the return of quality materials such as: tempered glass,
aluminium and steel. Minimalism never looked so exquisite!
The A1 PLUS features addressable RGB lighting,
that offers diversified color schemes by customizing
each individual light. The square structure provides
hassle-free installation, and the capacity to house powerful
hardware despite its compact size.
An InWin 650W, 80 PLUS Gold PSU is prebuilt within
the A1 PLUS with cables already managed. The A1 PLUS
also comes with two Sirius Loop addressable RGB fans,
and an enhanced Qi 1.2 10W charging panel
to charge your mobile devices!
Product Story

Specifications
A1 PLUS CASE
Model
Part Number
Colors
Case Type
Case Materials
M/B Compatibility
Expansion Slots
Maximum Compatibility
Front Ports
Internal Drive Bays
Thermal Solution
Compatibility
Power Supply
Compatibility
Product Dimensions
(H x W x D)
with screw & handle height
Product Dimensions
(H x W x D)
Package Dimensions
(H x W x D)
Net Weight
Gross Weight
A1 PLUS
IW-A1PLUS-BLACK
IW-A1PLUS-WHITE
IW-A1PLUS-PINK
Black, White, Pink
Mini ITX Tower
SECC, Tempered Glass
Mini-ITX
PCI-E x 2
VGA Card Length: 320mm
CPU Heatsink Height :160mm
2 x USB 3.0
HD Audio
2 x 2.5"
1 x 120mm Side Fan
1 x 120mm Rear Fan / 120mm Radiator
2 x 120mm Bottom Fans
InWin 650W PSU Included ATX12V V2.4
273 x 224 x 357mm
231 x 210 x 343mm
344 x 295 x 414 mm
7.1 kg/ 15.7lbs
7.9 kg/ 17.5lbs
■InWin products comply with RoHS regulation.
■Specifications may vary based on different regions.

InWin 650W 80PLUS Gold PSU
■InWin products comply with RoHS regulation.
■Specifications may vary based on different regions.
1
1
2
0
3
0
Model
Total Power
Material
Type
PFC
Efficiency
MTBF (Hours)
AC Input
Fan
Operating Temperature
Range(°C)
Full Protection
Safety Certifications
Dimensions(L x W x H)
Warranty
Connectors
IW-GD650PS
650W
SECC
ATX12V V2.4
Active PFC
80 PLUS Gold
> 100,000
100 ‒ 240Vac. 50-60Hz
120mm
0~40°C
OCP/OVP/UVP/SCP/OTP/OPP
TUV/cTUVus/BSMI/CB/CE/FCC/EAC/RCM
/KCC/CCC
140 x 150 x 86 mm
5 Years
Motherboard 24-pin
CPU 4+4-pin
PCIE 6+2 pin
Peripherals
SATA
Floppy Power

■InWin products comply with RoHS regulation.
■Specifications may vary based on different regions.
InWin Sirius Loop Fans
Model
Fan Size
Materials
Rated Voltage
Rated Power
Rated Current
ADD RGB Rated Voltage
ADD RGB Rated Power
ADD RGB Rated Current
Speed Mode
Air Flow
Air Pressure
Connector
Noise Level
Bearing Type
Life Expectancy
Sirius Loop ASL120
120 x 120 x 25mm
PBT
DC 12V
1.2W
0.1A
DC 5V
1.25W
0.25A
PWM 500-1800 RPM
50 CFM
1.67mm/ H2O
4-Pin
27 dB(A) Max.
Long Lifespan Sleeve Bearing
>30,000 hrs

Package Content
A1 PLUS Chassis
InWin 650W 80PLUS Gold PSU
InWin Sirius Loop fans x 2
Fan RGB One-Click Controller x 1
QR Code Card
Accessory Bag

Accessories Bag
b. 2.5” HDD Screws X 10
a. Hexagon Head Screws X 8
c. Graphic Card Holder X 1
d. Cable Ties X 5
f. ARGB One-Click Controller v1.1 x 1
e. Anti-Slip Strips X 4
a b
d
c
e f

Case Structure
1. Tempered Glass
2. Logo
3. SECC Front/ Side Panel
4. Power Button
5. HDD/Power LED indicator
6. USB 3.0 Ports
7. Audio Ports (Earphone and Microphone)
7
6
5
4
2
3
1

a. 2.5 Drive Bay
b. Side Fan Mounting Area
c. Rear Fan/ Radiator Mounting Area
d. Bottom Fan Mounting Area
e. Motherboard Mounting Area
f . CPU Cooler Installation Cut-Out Hole
g. PCI-E Expansion Slot
h. Extra PCI-E Supporting Mounting Hole
i. Power Supply Area
j. Fan Dust Filter
k. Wireless Mobile Device Charging Area
ab
c
g
j
e
f
d
h
i
k

Installation Guide
Please follow the related chapters to assemble
Opening the Chassis
For the side panel, please pull
the two tool-less tabs and lift up.
01
Motherboard
Installation
Parts Required: Hexagon Head
Screws
02
Expansion Card
Installation
Parts Required:
Hexagon Head Screws,
Graphics Card Holder
03

I/O Wires Installation
04
Switch/LED Connector
Blue(P_LED) 1
White(P_LED) 3
Brown(P_SW) 5
White(P_SW) 7
Key 9
2 Red (HDD)
4 White (HDD)
6 NC
8 NC
10 NC

Fan/ Liquid Cooling Radiator Installation
06
2.5” Drive Bays Installation
Parts Required: 2.5” HDD Screws
05

Addressable RGB-Cable Installation
07
If your motherboard supports the addressable RGB effect,
please follow the direction of sign and connect as followed:
Connect the case’s addressable RGB Y-Cable to a motherboard’s addressable
RGB header.
The fan cable, addressable RGB Y-cable and their counterparts are attached to each.
Please connect as followed:
Installing the 1st fan: Connect the addressable RGB Y-cable to the available
3-pin addressable RGB header of the case. Connect the fan cable to
the motherboard’s fan header.
Installing the 2nd fan: Connect the addressable RGB Y-cable and connect it to the
available 3-pin addressable RGB header of the previous fan. Connect the fan cable
to the available fan header from the previous fan.
2nd fan’s fan cable
2nd fan’s addressable RGB
Y-Cable
Motherboard
Fan Header
1st fan’s addressable RGB
Y-Cable
1st fan’s fan Cable
4
6
1
5
3
Motherboard
Addressable RGB Header
case’s addressable RGB Y-Cable
case’s addressable
RGB Y-Cable

Anti-Slip Strips Installation
Parts Require: Anti-Slip Strips
Remove the strip covers and place them under each corner.
08
If your motherboard does not support an addressable header, please use the included
Fan RGB One-Click Controller to connect to your PSU’s SATA cable and the case’s
Addressable RGB Y-Cable in order to use the 14 different lighting effects.
Hold the button to turn on or off the lights. Tap the button to change the lighting modes.
case’s addressable
RGB Y-Cable
1st fan’s addressable
RGB Y-Cable
ARGB One-Click Controller ver. 1.1
PSU’s SATA cable
1 8
2 9
3 10
4 11
5
6
7
12
13
14
Rainbow
LED-Red Breathing
LED-Green
LED-Blue
LED-Purple
Two-Tone Ring
Diagonal Transition
Rotating LED Trio
Full Circle
Flow-Red
LED-White
Light at the end of the Tunnel
Flow-Green
Flow-Blue

Completing Installation
Parts Required: Cable Ties
09

Notices and Warranty
■ Notices
1. Please follow the user manual for installation guidelines.
2. When installing the computer components, please use antistatic
precautions to prevent ESD (electrostatic discharge) damage.
Failure to take the necessary precautions may result in injury to
the installer and/or damage to the machine. Incorrect installation
may burnout the motherboard and other system components.
3. To avoid any damages, please do not use this product for any
other purpose than its intended use.
4. Any modifications may damage the product.
5. Please remove all internal devices before shipping or moving.
(Including power supply, hard drives, CD-ROM, motherboard, CPU, etc.)
6. When storing the case, please keep this product away from high
temperatures. Keep away from machines such as heaters that
might cause high temperatures.
7. Please do not put anything in the impeller.
8. Please do not touch the fan blades when the fan is in operation.
Please only use your fan in the computer case.
9. Please avoid unnecessary insertions and extractions to the
addressable cable as it may damage the pins.
■ Warranty
* For more detailed warranty information, please visit the
InWin retail website at www.in-win.com.
* The actual product is subject to change without prior
notice. InWin Development Inc. reserves the right to
make final modifications.

InWin IW-WT02 Wireless Charger User Manual

Specifications
User Guide
Input
5V/2A or 12V/1.8A
Output
Support Qi 5V/1A (OUTPUT:5V/2A),
7.5W / 10W Fast Charging (OUTPUT :12V/1.8A)
Power Transfer Efficiency
78%
Product Dimensions (HxWxD)
72 x 49 x 8mm
Warranty
1-year limited warranty
(Effective date based on the purchasing date from consumers)
1. Please make sure the power is connected.
2. Place the mobile device on the charging platform on the
top panel. Charging will begin after a “beeping” sound.

Wireless charger compatibility list
• Apple iPhone 8, 8+, XR, XS, XS Max
• Samsung Note5, S6, S6 edge+, S7, S7 edge, S8, S8+,
Note 8, S9, S9+, Note 9
• Nokia 8 Sirocco
• LG V30S, V30+, G7+ ThinQ
• Huawei Mate 20, Mate 20 Pro
• Sony XZ2, Xperia XZ2 Premium, XZ3
• Sharp AQUOS S3
• Google Pixel 3, Pixel 3 XL
• 小米 MIX 2S, MIX 3
■ Note to use
1. To avoid any computer and computer-related component damage,
please use IW-WT02 on InWin approved products.
2. To indicate that the mobile device battery is at a full charge,
the platform will continuously beep. To cease the beeping sounds,
simply remove the device.
3. Please check if the receiver is compatible with WPC Qi.
The full compatibility list can be found in the IW-WT02 user manual.

Copyright © 2019 InWin Development Inc. All Rights Reserved.