InWin Case Monsters-E Animal Series User manual

Case Monsters-E:
Animal Series User Manual

Assemble Guide Video
Installation Guide Video
Product Video
Product Video Information

The naughty little demon, LUFER, loves pranking,
and accidentally opened a portal when pranking
his friends FINNIE, BANBI & CALICO. The portal
created huge gravitational pull, teleporting the
four of them to a mysterious planet called, Case
Monsters World.
Although the planet is exciting and full of
surprises, there are weird, continuous bipping
sounds that may mean danger. They need to nd
a way to get back to where they belong and find
their humans. They decided to work as a team
and start their adventure on this strange planet.
Product Story

Model Case Monsters-E: Animal Series
Model Number
IW-CS-CASEMONSTERS-005,
IW-CS-CASEMONSTERS-006,
IW-CS-CASEMONSTERS-007,
IW-CS-CASEMONSTERS-008
Characters 005-FINNIE, 006-BANBI, 007-LUFER,
008-CALICO
Case Type Mini-ITX Tower
Materials Tempered Glass, SECC, ABS
M/B Compatibility Mini-ITX
Expansion Slots 3 x Vertical PCI-E
Maximum Compatibility GPU Length: 330mm
CPU Heatsink Height: 160mm
I/O Ports
1 x USB 3.2 Gen 2x2 Type-C
2 x USB 3.2 Gen 1
HD Audio
Internal Drive Bays 2 x 2.5" / 1 x 3.5"
Thermal Solution
Compatibility
Air Cooling Fans:
Top: 2 x 120 / 2 x 140mm
Rear: 1 x 120 / 140mm
(3 InWin ASL120 Fans Included)
Water Cooling Radiator:
Top: 1 x 240mm
* Number of fans pre-installed may vary based on di󶇯erent regions.
Power Supply Compatibility PSII: ATX12V
- Length up to 160mm
Product Dimensions
(L x W x H)
390 x 272 x 310mm
15.3 x 10.7 x 12.2”
Package Dimensions
(L x W x H)
405 x 300 x 225 mm
15.9 x 11.8 x 8.8”
Net Weight 3.75 kg / 8.26 lbs.
Gross Weight 5 kg / 11 lbs.
Speci󶇰cations
InWin Case Monsters-E: Animal Series Chassis
* InWin's products comply with RoHS regulations.
* Speci󶇰cations may vary based on di󶇯erent regions.

Speci󶇰cations
InWin Sirius Loop ASL120 Fans
* InWin's products comply with RoHS regulations.
* Specications may vary based on di󰀨erent regions.
Model Sirius Loop ASL120
Quantity Included Single Pack Triple Pack
Model Number IW-FN-ASL120-1PK IW-FN-ASL120-3PK
Colors Black
Fan Size 120 x 120 x 25 mm
Materials PC, PBT
Rated Voltage DC 12V
Rated Power 3.96W
Rated Current 0.33A
ADD RGB Rated Voltage DC 5V
ADD RGB Rated Power 1.5W
ADD RGB Rated Current 0.3A
Speed Mode PWM 500-1800 +/-10% RPM
Air Flow 50 CFM
Air Pressure 1.67 mm / H2O
LED Addressable RGB
Connector (Fan to Fan) Non-Modular Cables
Connector to M/B 4-Pin (PWM, 12V), 3-Pin (ARGB, 5V)
Noise Level 25 dB(A) (Normal)
Bearing Type Long Lifespan Sleeve Bearing
Gross Weight 200g 600g
Package Dimensions
(L x W x H)
185 x 125 x 30mm
7.3 x 4.9 x 1.2”
185 x 125 x 82mm
7.3 x 4.9 x 3.2”
Warranty 2 Years

Package Content
BANBI
FINNIE
CALICO
LUFER

Accessories Bag
S-2 Screws
S-1 Hexagon Head Screws
3.5” HDD Screws
Power Cord
Cable Ties
2.5” HDD Screws
S-3 Power Cord Screws
x 30
x 4
x 6
x 1
x 5
x 4
x 10
x 2
S-2 Rubber Stands

Case Structure
I/O Panel
Tempered Glass Side Panels
Anti-Dust Filter
Shock-Proof Stand
SECC Front Panel
1
1
2
3
4
5
4
2
5
3

1
2
3
4
5
6
7
2.5”/3.5” Drive Mounting Area
Power Supply Mounting Area
Top Fans/Radiator Mounting Area
Rear Fan Mounting Area
Motherboard Mounting Area
CPU Cooler Installation Cut-Out Hole
PCI-E Expansion Slots
67
Case Structure
32x120/140 Fans/
1x240 Radiator
PSU 160mm
Graphic card 330mm
Mini-ITX MB 2x2.5" SSD /
1x3.5" HDD
2
1
5
4

* Please follow the related chapters to assemble.
* Please only use original provided accessories to avoid damage
to the product.
1.
Opening the Chassis
2.
Motherboard Installation
Parts Required: Hexagon
Head Screws
Installation Guide

3.
Expansion Card Installation
4.
Connection Cables
I/O Wires
HD Audio Header
Black(P_LED) 1
Black(P_LED) 3
Black(P_SW) 5
Black(P_SW) 7
Key 9
2 Black (HDD)
4 Black (HDD)
6 NC
8 NC
10 NC
Parts Required: Hexagon
Head Screws

Parts Required:
Included Sirius Loop ASL120 Fans
Fan Installation Instructions:
https://youtu.be/_S_LLcqe0KI
USB 3.2 Gen 1 Header
USB 3.2 Gen 2x2 Type-C Header
5.
Fan/Liquid Cooling Radiator Installation

6.
2.5”/ 3.5” Drive Bays Installation
7.
Power Supply Installation
7.1 Uninstall the Power Supply Holder by unscrewing the two screws.
7.2 Screw your power supply to the bracket, connect the power cord to
your power supply and install the bracket back to the chassis.
Parts Required:
2.5”/ 3.5”
HDD Screws
You can choose to either install 2 x 2.5” SSDs or 1 x 3.5” HDD on
the selected area.
Parts Required: Hexagon
Head Screws

8.
Installation Complete
Parts Required:
Cable Ties

Notices and Warranty
■Notices
1. Please follow the user manual for installation guidelines.
2. When installing the computer components, please
use antistatic precautions to prevent ESD (electrostatic
discharge) damage. Failure to take the necessary
precautions may result in injury to the installer and/or
damage to the machine. Incorrect installation may
burnout the motherboard and other system components.
3. To avoid any damages, please do not use this product for
any other purpose than its intended use.
4. Any modi󶇰cations may damage the product.
5. Please remove all internal devices before shipping or
moving. (Including power supply, hard drives,
motherboard, CPU, etc.)
6. When storing the case, please keep this product away
from high temperatures. Keep away from machines such
as heaters that might cause high temperatures.
■ Warranty
* For more detailed warranty information, please visit the
InWin retail website at www.in-win.com.
* The actual product is subject to change without prior
notice. In Win Development Inc. reserves the right to make
󶇰nal modi󶇰cations.

Copyright © 2022 In Win Development Inc. All Rights Reserved.