inxni X6S User manual

Model: X6S
OWNER’S MANUAL
Thank you for purchasing inxni Robotic Vacuum Cleaner. To obtain the best result of the product, please
read this manual carefully as well as the quick start guide to get familiar with the product.
Welcome to the world of smart robotic floor cleaner.
inxni Robotic Vacuum Cleaner is a robot based on laser autonomous navigation
with advanced smart technology. Equipped with a laser scanning range finder,
inxni Robotic Vacuum Cleaner can create a map intelligently and optimize the
cleaning path accordingly. It can automatically return to the initial position after
completing the cleaning work because it has the memory function of map
coordinates. The APPS provide the interactive control, visualize the area, avoid
obstacle and automatic recharge and scheduled cleaning.
Thank you for purchasing iBoto inxni Robotic Vacuum Cleaner. We believed that
you will enjoy the product.

Thank you for choosing the inxni roboc vacuum cleaner
Please read the manual carefully before using.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Owner’s Manual

Product Maintenance
5.1 Storage
5.2 Cleaner General Maintenance
5.3 Cleaning the Dirt and Dust inside the Dust-box
5.4 Cleaning Dust in the Filter
5.5 Brush Cleaning
5.6 Cleaning the Side-brush
5.7 Cleaning the Wheel
5.8 Cleaning the Sensor
15-19
5.
Product Trouble Shooting
6.1 Error Message
6.2 Common Issue or Problem
20-21
6.
APPS Installation 23-25
8.
Product Specification 22
7.
Product Safety
1.1 User Instructions
1.2 About Safety of the Product
1.3 About Children’ Safety
1.4 About Battery
1.5 About where the cleaner
should NOT be used
1.6 Violation of Warranty
03-07
1.
Product Anatomy
2.1 Part Name and Package Contents
2.2 Main Control Panel Description
4.1 Product Cleaning Mode
4.2 Charging Mode
08-11
2.
Product Installation 11
3.
Product Operating Mode 12-15
4.
1. Product Safety
1.1 User Instructions
Read allof the following safety precautions carefully prior to the use of this product:
Operate this product inaccordance with the steps indicated in this OWNER’S Manual.
Keep the OWNER’S Manual properly stored for future reference.
If you need to have any third party use this Cleaner, please hand the OWNER’S Manual over together with quick start
guide to the new owner.
Serious personal injury or damage to the Cleaner itself may occur if owner does not follow the Cleaner usage guideline
mentioned in this Manuel.
1.2 About Safety of the Cleaner
This Cleaner must use with the original adapter, battery and charging stand provided with the Cleaner. If not, the Cleaner
may cause damage, Electric shock or Fire hazard as a result.
If you find the main body and parts of this Cleaner damage, please stop using it immediately and contact our customer
service as soon as possible.
Only inxni designated or authorized servicemen or service center is allowed to dismantle, repair or replace the Cleaner.
Don’t touch the power plug or the Cleaner when hands are wet as this may cause electrical shock.
To avoid personal injury due to the accidental drop such as from stair case of the Cleaner, please don’t uses the Cleaner
in the area close to staircase step, unsecured balcony, etc ensure that fence out the area if needed.
Don’t pull or move this Cleaner with the power cable and don’t bend or place heavy object on top of the power cable.
Keep the Cleaner away from fire, inflammable matter, explosive and corrosive chemical.
Don’t place your clothes, any parts of your body such as hair, finger, nail, etc close to the rotating brushes or wheel when
the Cleaner is in operation as it may cause personal injury.
Cleaner should only use indoor.
Keep theCleaner away from water, oil or other liquid as it may cause damage to the electronic inside the Cleaner.
No loosewires should scattered on the floor as it may cause damage to the Cleaner when the Cleaner rolls over those wire.
Contents Product Safety
2 3

1.3 About Children’s Safety
Please remove fragile items such as glass cup, bottle, etc from table top.
The charging stand should set up against the wall so that the Cleaner can be properly docked upon initial and final cycle.
Turn off the ON/OFF power switch in Cleaner to avoid battery damage if the Cleaner is not use for a long period of time.
If the Cleaner is not used for a longer period of time, fully charge the battery and store the Cleaner in the cool and dry
place at the same time keep the bottom of the Cleaner dry and clean.
If the Cleaner is used for the first time or use after idle for a long period of time, charge the Cleaner for about 6 hours
before starting the cleaning cycling.
After the Cleaner is fully charged for the first 3 to 4 times, the Cleaner can be charged properly at the base should the
Cleaner ran out of power.
Unplug the power adaptor from the wall electrical outlet should the Cleaner stay idle for a long period of time.
Do not move or relocate the charging stand or cleaner when the cleaner is in operation as the cleaner may not be able to
dock automatically.
Cleaner consists of Laser Emission and don’t look into the front part of the Cleaner directly as looking into it may case eye
injury .
Do not allow children to operate the cleaner nor stay close to the cleaner when it is in operation.
Under all circumstances, children should not play with the package plastic bags or any packing related material as it
may cause suffocation.
Screw driver or related tools shipped is not a toy and should not be used by children.
1.4 About Battery
The cleaner can only work with the battery provided by original manufacturer and only genuine inxni battery should be
used at all the time.
Only inxni Power adaptor provided should be used to charge the cleaner.
Turn the power switch to OFF before removing the battery from the cleaner. In some case, only designated person authori-
zed by inxni can remove the battery from the cleaner.
Remove the battery when the cleaner is disposed at the end of it Cleaner life cycle.
Battery can only dispose into area under the local municipality recommendation and guidance.
Should battery require replacement, contact inxni customer service hotline for further advice and support.
Use of the incorrect or non-inxni genuine battery is prohibited and may cause accidents.
In case of battery leakage, don’t touch the battery with bare head as the chemical leaked my cause damage to skin or cl-
othes. When such incident occurs, send the battery to the local municipality designated recycling area or send it to the
inxni designated repair center.
Don’t dispose battery in normal garbage bin.
Properly handle the used battery of the cleaner (including the remote control) because it may contain environmentally haz-
ardous substances.
Please follow the local environment rules and dispose the battery into the local municipality designated recycle bin or area.
Product Safety Product Safety
4 5

The cleaner Not Applicable
1.5 About where the cleaner should NOT be used
*Cleaner should not be used in extremely hot or cold environment.
* Cleaner can only be used indoor.
*To avoid personal injury due to the accidental drop such as from stair case of the Cleaner, please don’t uses the Clea-
ner in the area close to staircase step, unsecured balcony, etc ensure that fence out those areas if needed.
*Don’t use the cleaner in the places which is wet, consists of flammable, explosive or corrosive chemical.
*Don’t allow the cleaner to collect or pick up burning cigarette butt or matches or any matter that is in flame.
*Don’t direct the cleaner to collect or pick up toner used inside the laser printer or photo copier as toner consists of sub-
stances that may cause fire hazard.
*Don’t direct the cleaner to collect sharp matter such as broken glass, iron nail, screws as such matter may cause dam-
age to the cleaner.
Important: Do not disassemble the Cleaner. Disassembling the Cleaner will
void the warranty. Only inxni or a party expressly authorized by inxni
should perform service on this Cleaner.
1.6 Violation of Warranty (1 year Limited)
The cleaner can’t be repaired or warranted when the owner conducted or encountered the following:
A. When owner failto store cleaner in places not according to the OWNER’S Manual;
B. The cleaner and components warranty period expired;
C. Damage occurred when owner disassemble the cleaner without sending it out to an authorized service center for
er pairing;
D. Not able to provide a valid proof of purchase at the time when service or repairing is required.
E. When the model number in the warranty card does not match with the Cleaner number shown in the cleaner.
F. When damage occurdue to force majeure including natural disaster;
G. When the Cleaner fail or damage due to unexpected factors or man-made reasons (including mis-operate, fluid
found in the inlet, improper insertion or pulling, hauling, bump, improper voltage input and others).
Product Safety Product Safety
6 7

2. Product Anatomy
Cautious:
Screw driver shipped is not a toy and should NOT be used by children.
The battery, side brush and filter were preinstalled to the cleaner prior to
shipment.
2.1 Part Name and Package Contents
The Cleaner
*1pc
Air Filter
*1pc
Side Brush
*2pc
Dust Brush
*1pc
Screwdriver
*1pc
Charging Station
*1pc
Battery
*1pc
Adapter
*1pc
*
2.2 Main Control Panel Description
Main Control Panel
B
Laser Sensor
umper
Ground Detection Sensors
Charging Pole Shoe
Side Brush
Front Wheel
Battery Compartment
Wheel
Floor Brush Main Brush
Dust Box
Main Control Panel Detail
Clock (Hour)
Schedule Program
Spot Cleaning
Clock (Minute)
ON/OFF (Auto Cleaning)
Current Time Setting
Home Key (back to charging station)
Battery Indicator
Product Anatomy Product Anatomy
8 9

1. Insert the upper half of thepart vertically into thebaseas shown.
2. Connect thebase with the DC power cord fromtheadaptor as shown
3. Place the charging baseagainst the wall and connect the power adapter to a wall outlet in which a 3.4 feet (1 meter) long
in front by 1.7 feet (0.5 meter) to the left and 1.7 feet (0.5 meter) to therightobstacle free area as shown is required.
Power Adaptor Input Jack
Charging Pad
Setting up the Charging Base
Charging Base
Product Anatomy Product Installation
Cauous :
Don’t place the charging base on carpet.
Don’t move or relocate the charging base while the cleaner is in the cleaning process, else the cleaner will not be able
to find the charging base automacally for charging.
1. Turn off the Power Switch when the vacuum cleaner should the cleaner is not used for extended period of me to prevent the
baery from any unexpected damage.
2. Should the vacuum cleaner is not used for a long period of me, fully charge the baery, then take out the baery and store it
in a cool and dry place separately. Keep the boom of the cleaner dry and clean as well while the baery is in storage.
3. When the cleaner is used again aer being put in storage for a long period of me, charge the baery for about 6 hours. Try to
fully use up the baery power and connue this cycle for about 3 to 4 me to enable the baery operates at its opmal point.
4. Use only the inxni genuine baery for the cleaner. If not, the non inxni baery may cause damage to the cleaner or unwanted
accidents.
5. When connecng the inxni genuine power adapter to the charging base, ensure that the wire between the adapter and the
charging base is properly stow to prevent the wire end up winding into moving part of the cleaner. Thus, damage to the cleaner is
ancipated
6. Don’t move or relocate the charging base while the cleaner is in the cleaning process, else the cleaner will not be able to find the
charging base automacally for charging.
7. High Voltage at the wall plug! Please operate the cleaner and plug in the power adaptor with dry hands.
To further enhance the life span of the baery.
3. Product Installation
Remove the protecve film in the front before the first use of this cleaner.
10 11
1.7 ft1.7 ft
3.4 ft1 M
0.5 M 0.5 M
1.7 ft1.7 ft
3.4 ft1 M
0.5 M 0.5 M
The work of each me starts
from charging staon
R
E
M
O
V
E
P
R
I
O
R
T
O
U
S
A
G
E
O
F
P
R
O
D
U
C
T

4.1.1 Description:
1. Ensure that the cleaner battery is charged fully. Turn on
the power switch and wait for about 20 seconds. The
battery indicator should light up while charging. At this time
the cleaner is in the standby mode and ready to use.
Cautions:
Should the cleaner is low on battery, cleaning cycle will be stopped and the cleaner will automatically search for the
charging base for charging.
4. Product Operating Mode
4.1 Product Cleaning Mode
2. When the cleaner is in standby mode, touch the “ ”
ON button to start the auto cleaning cycle. Touch the OFF
button to stop the cleaning cycle.
3. When the cleaner is on standby mode, touch the“ ”
SPOT button and the spot cleaning will start for cleaning
within 3.4 feet (1 meter) in diameter area. Touch the OFF
button to stop the cleaning cycle.
4. When the cleaner is on standby mode, touch the “ ”
HOME button and the cleaner will return to the charging base
and recharge. Should the cleaner need to resume to the cleaning
cycle again, touch the OFF“ ”button again to stop the
cleaner from go back to the base and resume to cleaning mode
4.1.2 Operational Guideline for Touch button seen on top of the Cleaner
Product Operating Mode Product Operating Mode
12 13
Turn on and wait
for about 20 seconds.
ON / OFF
In the standby mode, touch the " " ON button, the cleaner will start to clean.
Touch the " " OFF button, the cleaning cycle will stop.
In the clock setup mode, touch this " " button, the setting will be deleted.
SPOT Cleaning
In the standby mode, touch the " " button and the cleaner will start spot cleaning mode.
In the clock setup mode, touch " "button to adjust the hour setting.
HOME
In standby mode, touch the " " HOME button as return button
In Operation mode, upon touching the " " HOME button, the cleaner will search the charging base,
thus, return to the base for charging.
Touch the " "HOME button immediately after, the cleaner will stop searching the base.
In Scheduling mode, touch the" "HOME button to adjust the minute setting
SCHEDULE Setup
Touch the " " button the cleaner will enter the Scheduling mode;
Touch the " " button to adjust the hour setting. Each touches count as one hour and will increase to
24 hours and will loop back to 00 hours as the hour continue to increase.
Touch the " " button to adjust the minute setting. Each touches count as one minute and will increase
to 60 minute and will loop back to 00 minutes as the minute continue to increase.
Touch the " " button to save the Schedule setting.
Touch the " " button to exit or complete the time current setting.

5. Product Maintenance
4.2.1 Normal Charging
4.2 Charging Mode
1. Connect the power adapter provided and plug into the
power jack in the charging base of cleaner first.
2. Plug the power adaptor provided into the wall electrical
outlet.
3. Switch on the cleaner and wait for 20 seconds until it
enters the standby mode.
4. Place the cleaner in front of the charging stand and aim
it at the central position of the charging stand.
5. Manually push the cleaner to the charging stand slowly
until the charging pole shoe is well connected with the
terminal of charging stand.
6. Charging will start after the cleaner clicks.
5.1 Storage
OFF
5.2 Cleaner General Maintenance
1. APPS charging:
Connect the cleaner with the Apple iPhone / iPad or and then touch the “HOME” button (Icon) as seen in the APPS.
The cleaner will automatically search the location of charging base and return back to the base for charging once located.
2. Auto Charging:
The cleaner will stop cleaning when the battery power is low and it will search the location of charging base and return back
to the base for charging once located.
1. Shut off the power or unplug the wall power plug with dry hand before cleaning the main body and charging base
2. Gently clean the surface of the main body with damped cloth along with non aggressive cleaning agent
3. Don
’ t rinse the cleaner with running water or submerge the cleaner into water
4. Don
’ t clean the cleaner surface with oil or any oil base cleaning agent.
Tips:
Clean and Maintain the cleaner frequently
4.2.2 Automatic Charging:
Charging Mode
Product Maintenance
1. Shut off the power when
cleaner is not used for a long
period of time.
2. Should the vacuum cleaner is
not used for a long period of time,
fully charge the battery, then take
out the battery and store it in a cool
and dry place separately. Keep the
bottom of the cleaner dry and clean
as well while the battery is in storage
Cautious! High Voltage at the wall
power outlet! Hand must be dry when
plugging into the wall outlet.
14 15
CLOCK Setup
Touch the " " button, the cleaner will enter into current time setting mode.
Touch the " " button to adjust the hour setting. Each touches count as one hour and will increase to
24 hours and will loop back to 00 hours as the hour continue to increase.
Touch the " " button to adjust the minute setting. Each touches count as one minute and will increase
to 60 minute and will loop back to 00 minutes as the minute continue to increase.
Touch the " " button to save the time setting.
Touch the " " button to exit or complete the time current setting.
Charging base center line

5.3.1 Removing the Dust Box
5.3.2 Emptying the Dust and Dirt from the Dust-box
5.3 Cleaning the Dirt and Dust inside the Dust-box
1. Gently lift up the buckles on both
side of the dust box as shown above
2. Open the upper and lower baffle
and remove the dust and dirt
3. You may wipe the inside of the
dust box with the brush provided
or a dry cloth.
5.4 Cleaning Dust in the Filter
1. Follow and complete step listed
in 5.3.2
2. Remove the electric motor as
shown by pressing down the
button as indicated.
(Warning: The electric motor
assembly can
’ t be washed
directly or submerge in water.)
As shown in the above picture, press the button on
the dust box and slowly draw out the dust box from
the cleaner as the first step.
5.5.1 Removing and Installing the Center Brush
Product Maintenance Product Maintenance
5.5 Brush Cleaning
3. Take out the filter as indicated
and gently bush off the dust seen
on the filter into the garbage using
the brush provided in the
accessory box.
4. After completing the cleaning, install the filter
and electric motor assembly into the dust box
5. Then install the dust box back into the cleaner
as shown above
4. should too much dust seen
inside the box and on the filter,
gently rinse the filter with clean
water (Warning: the dust box
and filter can be placed back
into the cleaner only when they
are fully dry.)
1. As shown in the above diagram,
push the locking buckle and lift up
the side bar as indicated.
2. Hold and lift up the side bar and
gently remove the main brush first.
Then, remove the floor brush after.
16 17