① HUD the choice of location
A. Selected as the installation location of the HUD sitting in the driver's seat.
B. HUD installation by attaching to the window as possible.
C. Installed power connection port of the HUD to come to the left on top of the
non-slip pad.
② Reflective film with
A. Reflection film, install it with the maximum HUD.
B. Wipe clean the location where you want to paste the reflection in the window
film.
C. And removing the protective film of stickers in a single reflection film.
D. Put to match the bottom of the HUD under the reflective film.
E. The removal of air bubbles between the window and the film.
F. And removing the protective film sticker twice in the reflective film.
③ Connecting the Power Cable
A. Connect with HUD connectors smaller power cable.
B. And connected to the USB port of the vehicle connector of the larger of the
power cable.
④ Install the Z-NAV navigation app
A. Only compatible smartphone Android 3.0 or higher.
B. Install after a search of the A-NAV from Google Play Store.
⑤ Pairing of Bluetooth
A. Power of Z-HUD.
B. Enabling Bluetooth smartphone.
C. In the Bluetooth settings of the smartphone, search for the new equipment,
Z-NAV registration.
⑥ Z-HUD registration of Z-NAV
A. Power of Z-HUD.
B. Check the status of the Bluetooth pairing of Z-HUD smartphone.
C. In the preferences of the Z-NAV after running, the selection of the Z-HUD after
you run the [Z-HUD Register].
⑦ Use Z-NAV
A. You want to use by setting the destination in the Z-NAV.
