manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. iOptron
  6. •
  7. Rack & Stand
  8. •
  9. iOptron Pier User manual

iOptron Pier User manual

This manual suits for next models

2

Other iOptron Rack & Stand manuals

iOptron CEM40EC User manual

iOptron

iOptron CEM40EC User manual

iOptron HEM27 User manual

iOptron

iOptron HEM27 User manual

iOptron CEM120 User manual

iOptron

iOptron CEM120 User manual

iOptron HEM44 Series User manual

iOptron

iOptron HEM44 Series User manual

iOptron SmartStar iEQ45 User manual

iOptron

iOptron SmartStar iEQ45 User manual

iOptron CEM40 User manual

iOptron

iOptron CEM40 User manual

iOptron HAE69B User manual

iOptron

iOptron HAE69B User manual

iOptron CEM60 User manual

iOptron

iOptron CEM60 User manual

iOptron Tri-Pier User manual

iOptron

iOptron Tri-Pier User manual

iOptron CEM26 User manual

iOptron

iOptron CEM26 User manual

iOptron CEM70G User manual

iOptron

iOptron CEM70G User manual

iOptron HEM27 User manual

iOptron

iOptron HEM27 User manual

iOptron SkyHunter Portable EQ/AZ GoTo System User manual

iOptron

iOptron SkyHunter Portable EQ/AZ GoTo System User manual

iOptron HEM27 User manual

iOptron

iOptron HEM27 User manual

iOptron CEM70 User manual

iOptron

iOptron CEM70 User manual

iOptron MiniPier User manual

iOptron

iOptron MiniPier User manual

iOptron Precision AZ/EQ Base User manual

iOptron

iOptron Precision AZ/EQ Base User manual

iOptron SmartStar CubePro GOTO AltAz User manual

iOptron

iOptron SmartStar CubePro GOTO AltAz User manual

iOptron HAZ31 User manual

iOptron

iOptron HAZ31 User manual

iOptron GEM45 User manual

iOptron

iOptron GEM45 User manual

iOptron NI63385 User manual

iOptron

iOptron NI63385 User manual

iOptron GEM28 User manual

iOptron

iOptron GEM28 User manual

iOptron CEM25 User manual

iOptron

iOptron CEM25 User manual

iOptron GEM45 User manual

iOptron

iOptron GEM45 User manual

Popular Rack & Stand manuals by other brands

Dynex DX-MP3MT Quick setup guide

Dynex

Dynex DX-MP3MT Quick setup guide

Konig & Meyer 24185 manual

Konig & Meyer

Konig & Meyer 24185 manual

ECG LD 326501 instruction manual

ECG

ECG LD 326501 instruction manual

Philips SB7S19S/00 quick start guide

Philips

Philips SB7S19S/00 quick start guide

Woodline KIT-250 lb instructions

Woodline

Woodline KIT-250 lb instructions

ricoo S1222 installation instructions

ricoo

ricoo S1222 installation instructions

Kanto P301 user manual

Kanto

Kanto P301 user manual

VidaBox VB MNT FFS2 installation guide

VidaBox

VidaBox VB MNT FFS2 installation guide

PROEL PLWIN60C user manual

PROEL

PROEL PLWIN60C user manual

AllMounts PLB-43S instruction manual

AllMounts

AllMounts PLB-43S instruction manual

VMP VH-001 instruction sheet

VMP

VMP VH-001 instruction sheet

Nederman SYSTEM 920/400 instruction manual

Nederman

Nederman SYSTEM 920/400 instruction manual

Glasdon ORBIS POST MOUNTING KIT installation guide

Glasdon

Glasdon ORBIS POST MOUNTING KIT installation guide

Songmics LGR105 manual

Songmics

Songmics LGR105 manual

Grape GM401 user manual

Grape

Grape GM401 user manual

FourStarGroup 11225296 manual

FourStarGroup

FourStarGroup 11225296 manual

CHIEF FLR100 installation instructions

CHIEF

CHIEF FLR100 installation instructions

FEC XDCAM EX PMW-EX30 manual

FEC

FEC XDCAM EX PMW-EX30 manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

1
iOptron®Pier
Instruction Manual
Product #8030, #8033
®
2
iOptron®Pier is designed for iOptron GOTO
mounts, which includes iEQ45, iEQ30,
MiniTower, MiniTower II, or MiniTower Pro
mount.
Parts included1:
1. 1x Pier Tube
2. 1x Pier Base with three (3) Pier Legs
preinstalled
3. iEQ45 Center Stud and Alignment Peg
(preinstalled)
4. 1x M12 Center Bolt with turning lever for
MiniTower/MiniTower Pro mounting
5. 1x iEQ30 Alignment Peg
Specifications:
#8030 48 inch tall pier:
yPier diameter: 5.7" (144mm) with 6"
(150mm) Flange plates
yPier height: 40” (1016mm)
yStanding height:48” (1220 mm)
yLeg length: 22.5” (570mm)
yNet weight: 25 lbs (11.3 kg)
yPayload: 132 lbs (60kg)
#8033 42 inch tall pier:
yPier diameter: 5.7" (144mm) with 6"
(150mm) Flange plates
yPier height: 34” (840mm)
yStanding height:42” (1066mm)
yLeg length: 22.5” (570mm)
yNet weight: 23 lbs (10.4 kg)
yPayload: 132 lbs (60kg)
Pier Setup:
iOptron pier comes in a single box. For #8030 (48”
pier), all the parts are stored inside the pier tube, as
shown in Fig.1. For #8033 (42” pier), three (3) poll
rods may slide into the pier tube, but not as secure
as #8030.
Figure 1
1Parts included may be different from the list and photos.
Unthread the Pier Locking Screw (This screw is
only used for pier storage). Separate the Pier
Base with Legs from the Pier Tube. Remove the
Pull Rods from inside the pier.
Figure 2
Figure 3
Move the Pier Foot from the end to the side.
Figure 4
Spread the Pier Leg. Put the Pier Tube onto the
Pier Base, with Pier Alignment Slot aligned over the
Alignment Tab on the Pier Base.
Pull Rods
Pier Foot
Pier Foot
(Storage
Position)
Pier Base
Pier Tube
Pier Locking
Screw
3
Figure 5
Adjust the length of the three Pull Rods. Hook one
end of a Pull Rod onto a bolt located on the Pier
Leg and the other Pull Rod end onto the mounting
beam inside the Pier Tube. Evenly tighten the Pull
Rods. Make sure there is no gap between the Pier
Base and Pier Tube.
Figure 6
There are three sets of holes/threads on top flange
of the pier. They are designed for mounting an
iEQ45, an iEQ30 or a MiniTower series mount, as
indicated in Figure 7.
Figure 7 Pier with Alignment Peg and Center Stud
for iEQ45
To install an iEQ45 mount onto the pier, just simply
face the alignment peg north (if you are located in
northern hemisphere), and install the iEQ45 mount.
Tighten 3 Azimuth Locking Screws.
Figure 8 iEQ45 on a pier
To install an iEQ30 mount onto the pier, remove the
iEQ45 alignment peg. Thread an iEQ30 alignment
peg into the middle threaded hole located on inner
circle. Then face the alignment peg north (if you are
Tighten evenly
Adjustable Feet
Pier Leg
Pier Base
Align Slot
Align Tab
For iEQ45 Azimuth
Lockin
g
Screw Alignment
Peg
Center
Stud
4
located in northern hemisphere), and install the
iEQ30 mount. Tighten 2 Azimuth Locking Screws.
Figure 9 Pier with Alignment Peg and Center Stud
for iEQ30
Figure 10 iEQ30 on a pier
To install a MiniTower series mount (MiniTower,
MiniTower II or MiniTower Pro) onto the pier,
remove the top flange from the Pier Tube by
remove three mounting screws. Remove iEQ
Center Stud and Alignment Peg. Insert the
MiniTower Center Bolt through the center hole.
Install the Turning Lever. Mount the Top Flange
back to the Pier Tube.
Figure 11 Pier with MiniTower Center Bolt
Install 3 MiniTower level adjustment screws and
threaded in about half of the threads. Put the
MiniTower on to it. Level it. Thread the MiniTower
Center Bolt into the MiniTower and tighten it. Make
sure the mount is leveled while rotating the mount.
Figure 12 MiniTower on a Pier
For iEQ30 Azimuth
Lockin
g
Screw For MiniTower
Levelin
g
Screws Center Bolt