iOttie Easy One Touch Mini User manual

Dashboard & Windshield Mount
Easy One Touch Mini
Operation Manual

At a Glance
Release Bars
Suction Cup
Dashboard Pad
Locking Side
Arms
Lever
Rotating Ball Joint
Pivot Knob
Easy One Touch
Trigger Button
Getting Started
For optimal mounting, please follow the detailed instructions within
this manual when using the Easy One Touch Mini Dash & Windshield
Mount. iOttie is not liable for possible damages due to product
misuse.
We strongly recommend using the Dashboard Pad under the Suction Cup
The Dashboard Pad is mounted with a semi-permanent adhesive tape. Each
pad is one-time use only. Once removed, it can not be repositioned.
Universal design, fits smartphones and cases from 2.3” - 3.5” wide.
When mounting, it is recommended that the surface & product be
above 40° F.
Specifications
ITEM SPECIFICATIONS
DEPTH 5.51”
WIDTH 2.76”
HEIGHT 4.33”
WEIGHT 6.4 oz

Installation
A. Connect the Mount Cradle with
the Ball Joint.
Choose an installation method: Dashboard/Flat Surface (A) or
Windshield/Curved Glass (B).
Choose an area on a flat surface on the vehicle’s dashboard
and wipe any dust or debris from the surface.
B. Then, tighten the Cradle Knob.
2. Selecting a Location
1. Assembling the Mount
Option A
Dashboard or Flat Surface Installation
2. Peel o the protective
film on the Suction Cup
and press mount firmly
onto the dashboard pad.
3. Push Locking Lever
down to engage
suction.
STICKY SUCTION CUP
1. Peel o the film
on the dashboard
pad & stick on the
desired installation
location.
1. Peel o the protective film on the
Suction Cup and press firmly onto
the windshield.
Choose a location on the windshield and wipe any dust or debris from
the surface. Dashboard Pad not necessary for windshield installation.
2. Push Locking Lever down to
engage suction.
Option B
Windshield Installation or Curved Glass Installation
STICKY SUCTION CUP
Additional Information
To reuse Suction Cup, simply rinse under warm water and let air dry
to restore tacky suction.

Using the Easy One Touch Mechanism
The Easy One Touch lock and release mechanism makes it simple to
mount & retrieve smartphones in seconds.
Mount Pivots on 225°arc for
optimal viewing.
Cradle rotates 360°to easily
transition between landscape and
portrait viewing.
Mounting
Releasing
1. Press the locking side
arms in.
Press the locking side
arms with one hand and
retrieve the device.
2. Press your device against
the Easy One Touch trigger
button. The mount’s arms
will automatically close on
contact and hold the device
during the driving journey.
1. Cradle Knob
When mounting in landscape mode,
loosen to rotate the Cradle. Tighten
to lock in desired position.
4. Pivot Knob
Located on the side of the Mount
Base, turning allows you to pivot
telescopic arm. Tighten to secure
position.
Adjusting the Mount

www.iottie.com [e-mail]
EN
ES