iPega PG-9156 User manual

iPega PG-9156 Bluetooth Gamepad with
Smartphone Holder

Specifications:
- Connectivity: Bluetooth 4.0
- Battery capacity: 500mAh
- Battery life: 15h
- Standby time: 30 days
- Supported smartphones: up to 6"
- Compatibility: Android, iOS, Windows, PS3, Nintendo Switch
Product overview
1. USB port
2. LB/LT button
3. Select button
4. Android button
5. D-pad
6. Turbo button
7. Left 3D and down L3 button
8. 2.4G wireless receiver
9. Mode and charging indicator
10. RB/RT button
11. Start button
12. iOS button
13. ABXY buttons
14. Clear button
15. Right 3D and down R3 button
16. Home button (hold it down to turn on/off)

Android operation instructions
V3 direct play:
- Press and hold Android + Home buttons simultaneously for 2 seconds to start pairing
for V3 direct play, and the LED1 indicator on the gamepad flashes quickly. When the
device name "PG-9156" is available on the Android phone/tablet, select and connect it.
After it is successfully connected, the LED1 indicator will be always on. You can directly
press the home button, and LED1 indicator will flash slowly, which will be automatically
connected.
Standard game:
- Press and hold the X + Home buttons for 2 seconds to start pairing for standard game,
and the LED3 indicator on the gamepad flashes quickly. When the device name
"PG-9156" is available on the Android phone/tablet/smart TV, select and connect it.
After it is successfully connected, the LED3 indicator will be always on. You can directly
press the Home button, and LED3 will flash slowly, which will be automatically
connected. You can directly play simulator games, or you can download the Gamepad
enabled games from Google Play Store.

iOS operation instructions
V3 direct play:
- Press and hold the iOS + Home buttons for 2 seconds to start pairing for V3 direct
play, and the LED2 indicator on the gamepad flashes quickly. When the device name
"PG-9156" is available on the iOS phone/tablet, select and connect it. After it is
successfully connected, the LED2 indicator will be always on. You can directly press the
Home button, and LED2 will flash slowly, which will be automatically connected.
Wired mode
- It will automatically recognize different modes under wired mode. Press the "RB"
button while plugging in the USB data cable, and LED1 & LED3 flash quickly. Support
Windows PC, Android device, PS3, and NS.
1. PC connection: Press the "RB" button while plugging in the USB data cable to
Windows PC (the default mode is X-input 360 mode), and LED3 is always on. Press
and hold the Select + Start buttons for 3 seconds to D-input mode, LED2 is always on.
2. PS3/NS/Android connection: Press and hold the "R1" button while plugging in the
USB data cable to the console, LED light will be always on after successfully connected.
2.4G mode
- It will automatically recognize different modes under the 2.4G receiver mode: support
PC, Android, PS3, and NS console. Press and hold the L1 + Home buttons for 3
seconds to enter into 2.4G mode, LED1 and LED2 will flash quickly, and when
successfully connected, LED1 and LED2 will be always on. Once successfully
connected, press the Home button to reconnect, and LED1 and LED2 will flash slowly.
Press and hold the Select + Start buttons for 3 seconds to switch between D-input and
X-input 360 mode.

Charging
- Use the included microUSB cable to recharge the gamepad
- When the power is low, the LED4 indicator flashes quickly
- While recharging it, the LED4 indicator flashes slowly
- When it is fully charged, the LED4 indicator is always on
Turn on/off
- The gamepad automatically shuts down when there is no operation within 5 minutes
- To start the operation again, you need to press the Home button to wake it up and
connect it to the console
- To turn it off, press and hold the Home button for 3 seconds
Turbo mode
- All 8 action buttons can be manually set to Turbo mode
- Press and hold the action buttons, and then press the Turbo button to enable the
Turbo mode
- Press and hold the action buttons, then tap the Clear button to disable the Turbo mode