iPega PG-P4008 User manual

1. 产品主要适用于P4游戏主机、同时可兼容P3游戏主机、安卓（支持安卓10.0以上）、
iOS(13.0以上)、PC电脑上连接,进行游戏操作时使用。
2. 蓝牙连接方式与原装手柄连接方式相同。采用高性能蓝牙无线连接技术“蓝牙2.1+EDR”，提供
8米以内无延迟不掉线的可靠信号，抗干扰性强，不会受其它无线设备的影响。免驱动，自动连接，
无需繁琐的对码过程。
3. 内置LED彩色呼吸灯，手柄具有彩色LED光条指示玩家手柄通道功能及状态指示，指示功能方式
同原装P4手柄相同，不同的手柄由不同颜色的LED指示。
4. 内置左右非对称马达，支持双马达双振动功能。
5. 内置3D加速度传感器和陀螺仪传感器，具有六轴感应功能。
6. 内置扬声器与3.5mm耳机插孔，可以连接耳机或通过扬声器输出游戏的音频。
7. 结构符合人体工程学,手感舒适。
8. 支持双点电容式感应触控板。
9. 支持在线升级手柄固件,支持P4主机最新升级系统. 可有效避免因主机系统升级导致产品无法使用。
因官方游戏平台软件升级或源代码变更等不可抗拒的因素造成部分游戏无法与本产品连接操作，
我公司不负任何责任。对此我公司保留最终解释权。
产品适用说明:
1. 连接P4主机：
1.工作电压/电流：DC3.7V/ <30mA；
2.电池容量：400mAh；
3.静态电流: <20uA；
4.充满电持续使用时间: 约12小时；
注意事项：
产品清单
功能按键图示
P4游戏手柄
产品说明书(PG-P4008)
十字方向键 功
选项键分享键
能键
扬声器
右3D及下压R3键
左3D及下压L3键
3.5mm音频接口
触控板
HOME键
呼吸指示灯
无线手柄 x1 说明书 x1 Micro-USB线 x1
产品特性参数：
产品使用说明:
1. 请不要把本产品在潮湿或高温地方存储。
2. 不要敲击、摔打、刺穿、或试图去分解本产品，以免对产品造成不必要的损害。
3. 非专业人员误拆卸本产品,否则不在售后保修服务内。
4. 因官方软件升级或源代码变更等不可抗拒的因素造成部分游戏无法与本产品连接操作，我公
司不负任何责任。对此我公司保留最终解释权。
R1键
R2键
L1键
L2键
USB接口
USB接口
1）P4主机开机进入界面后，将数据线插入至主机的USB端口，手柄连接上数据线，然后按手柄端的
HOME键（ ），手柄LED灯会快闪，当手柄上单个颜色LED常亮，表示连接成功，然后拔掉数据
线。按手柄端的HOME键（ ），手柄与主机自动回连。
2）单按HOME键（ ）：1.显示主画面，2.连按2次HOME键（ ）是切换启动中的应用程序。3.
手柄睡眠后单按可以唤醒手柄。4.无唤醒主机功能。
3）长按HOME键：1.结束应用程序。2.登出/关闭P4主机电源。3.会依目前状况显示可操作的项目。
4）P4主机中: 手柄SHARE键：可以开启 (分享)按钮。 OPTIONS键：开启选择(选项)按钮。
PS3主机中：SELECT对应P4的SHARE键，START键对应P4的OPTIONS键。
5）手柄彩色LED指示状态说明：显示Player状态，按下HOME键（ ），RGB彩色LED（光条）会
依蓝色、红色、绿色、紫色顺序亮灯，配置各控制器，作为使用者登入顺序辨识。1P:蓝. 2P:红 3P:
绿. 4P:紫色
A. 工作通道: P4主机提供一次最多能连接4个P4手柄同时使用，手柄由不同的LED颜色来指示。
B. 如手柄连机后对应的通道LED指示所在工作通道，第一支手柄连接上主机，手柄端亮蓝色灯，表
示用户1。第二支手柄连接上主机手柄端亮红色灯，表示用户2。关闭P4主机电源，彩色LED大概在
10秒内熄灭，系统处于休眠状态。
6）触摸屏测试：在P4主机设置--网络连接—选择无线网络---输入界面---可以测试到触摸屏功能。
7） 重力感应，陀螺仪功能在支持六轴的主机游戏内操作会有相应的动作感应。
8）在游戏内可以测试到喇叭和耳机的声音输出，插入耳机时，喇叭无声，拔出耳机，则喇叭发声。
2.连接P3/PC主机：
3.连接安卓设备(安卓标准游戏模式)：
4.连接iPhone/iPad(IOS MFI游戏模式)：
1）通过USB数据线将手柄连至P3(连接后按HOME键)或PC的USB端口，当有线手柄使用。
2）连接P3/PC使用时不支持六轴感应和震动功能。连接PC电脑时，需安装P4驱动程序.
1.手柄关机状态下同时按SHARE+HOME 2秒开启手柄，指示灯快闪。
2.在安卓设备的蓝牙列表中，找到并点击“Wireless Controller”进行配对连接
3.配对连接成功后手柄LED指示灯常亮，手柄进入安卓标准模式。推荐使用平台：葡萄游戏厅
1.手柄关机状态下同时按SHARE+HOME 2秒开启手柄，指示灯间隔性快闪。
2.在iOS设备的蓝牙列表中，找到并点击“DUALSHOCK 4 Wireless Controller”进行配对连接
3.配对连接成功后手柄LED指示灯常亮，手柄可玩iOS MFI类游戏
注意事项：仅支持iOS 13以上系统设备
部份MFi游戏目录：苹果App Store商店搜索下载“Gamevice Live”游戏平台或搜索MFI、Gameloft
大多数游戏都支持
现代战争5、狂野飙车8、狂野飙车9、NBA2K18，刺客信条，电磁风爆、我的世界、未来之战、
Never gone安魂曲、沌与秩序之英雄战歌、混沌与秩序online、魔龙与勇士、聚爆、世界2：风暴帝
国、怪物猎人、时空猎人、fifa 17、18、真实赛车3、质量效应：渗透者、 地牢猎人4、 侠盗猎车手
、使命召唤、浴火银河2、 帝之火：普罗米修斯 、 孤胆车神：维加斯、行尸走肉：第二季、古墓丽
影2（3D）、死亡扳机2，拳皇2012、拳皇97、98、崩坏学园2 ，枪火战线，乐高星球大战，真实拳
击.无敌士兵、辐射岛、速度与激情6，战场、NBA 2K15、16、坦克世界：闪电战、：身份、银河火
战、勇闯死人谷、愤怒的机器人、异性大战铁血战士：进化、花千骨 、逃亡、兄弟连3：战争之子 、
最终幻想6、铁甲钢拳：世界机器人拳击、合金弹头3、搏击长空：风暴特工队、魂斗罗：进化革命、
泰拉瑞亚、索尼克全明星赛车:变形、星球大战:旧共和国武士、火箭飞车2、曙光等
5.充电电压/电流：DC5V/<500mA；
6.充电时间：约2小时；
7.BT2.1，传输距离：≤8M；
8.待机时间：满电放置30天；
低电量指示：
当手柄电量不足时，手柄指示灯快闪,提示您及时充电；电量严重不足时，手柄将进入休眠状态。
充电指示：
当手柄处于无线连接状态时，插入USB充电线，手柄开始充电。
手柄未无线连接时，手柄指示灯绿色灯渐亮/渐灭显示, 表示正在充电，充电完成，指示灯熄灭。
手柄充电/休眠功能:

Application instruction:
1. Connect to P4 Console：
1.Working voltage/current: DC3.7V/ <30mA
2.Battery capacity: 400mAh
3.Static current: <20uA
4.Continuous game play time up to 12
hours after fully charged；
Notes:
Product list:
Illustration of buttons:
Wireless Game Controller for P4
User Manual for PG-P4008
D-pad Action Buttons
OptionsShare
Speaker
Right 3D,
press down is R3
Left 3D,
press down is L3
3.5mm
earphone jack
Touch pad
HOME
Breath LED
Wireless controller x1 User Manual x1 Micro-USB cable x1
Product Specification:
How to use:
1. Please do not store this product in wet or high-tempeature areas.
2. Don't knap, bear, drub,pierce, or try to decompose this product, to avoid unnecessay
damage to the product.
3. Non professional persononel shoulod not disassemble the product, otherwise it will not be
covered in the after-sales warranty services.
R1
R2
L1
L2
USB charge port
USB port
1）Open P4 console and enter enter the main interface, insert the data cable into the USB port of
the P4 console and connect the other end to P4 controller, and then press the HOME button
on controller, the LED light of the controller will flash quickly. When a single color LED on the
controller is always on, it means that the connection is successful, and then pull out the data cable.
If want to reconnect the controller, press the HOME button , then they will connect automatically.
2) Single press HOME button : 1. Display the main screen; 2. Press HOME button twice to
switch the application in startup.
3)When controller under sleep mode, single press HOME button to wake up the controller. 4.
Can not wake-up the P4 Console.
4) Long press the HOME button : 1. Shutdown the application. 2. Log out / turn off P4 console
power. 3. Display the operable items according to the current situation.
5) Share key: can open (share) button. Options key: turn on the selection button.
6) Breath LED indication status description: display player status, press HOME button , RGB
colorful LED (light bar) will light up in the order of blue, red, green, purple, configure each controller,
as the user login sequence identification. 1p: blue. 2p: red, 3P: green. 4P: Purple
A. working channel: P4 console can connect up to four P4 controllers at one time for playing at the
same time. The controllers are indicated by different LED colors.
Such like the LED indicate the corresponding channels after the controller is connected to the P4
console, the first controller is connected to the console, and the blue light on the controller end
indicates User 1. The second controller is connected to the console, and then the controller end of
the console lights up to indicate user 2. Turn off the power of P4 console, the color LED will turn off
in about 10 seconds, and the system will be in sleep state. 6) Touch screen test: in P4 console
settings - network connection - select Wifi network - input interface - you can test the touch screen
function.
7) Gravity sensing, gyroscope function in support of six axis console game operation will have
corresponding action sensing.
8) In the game, you can test the sound output of speakers and headphones. When you plug in the
headphones, the speakers are silent. If you pull out the headphones, the speakers will sound.
3. Connect to P3 Console / PC：
2. Connect to Android Devices (Android Standard mode)
4.Connect to iOS mobile phone/Tablets (IOS MFIgames mode):
Insert USB data cable to P3/PC’s USB port, the other end connect to Controller. (press HOME
button after connected to P3 console, can be as a wired controller.
Don’t support six axis and vibration function when connect to P3/PC.
1) Press and hold Share+HOME buttons 2 seconds to open controller, indicator will flash quickly.
2) Open BT setting on your Android device, try to find and pair with BT device “Wireless Controller”.
3) Controller LED indicator turn on when successful BT connected which means you can play the
games on your Android devices. Support to play the controller supportable games or download the
supportable game app.
1) Press and hold Share +HOME button 2 seconds to open controller, indicator will flash quickly.
2)Open BT on your IOS device, find and pair with “DUALSHOCK4 Wireless Controller”.
3) LED will light on after successful connected. Then you can use the controller to play MFI games
on your IOS devices.
4) Only support iOS 13 or above system of iOS devices.
5)There were many MFIgames supportable, search “Gamevice Live” game App or search MFI
or Gameloft from Apple App store.
Low power indication: LED indicator flash quickly reminds you charge the controller in time.
Controller will enter into sleeping mode when battery is empty.
Charge indicator:
When controller under wireless connected, plug the USB charge cable to recharge the controller.
When controller not wireless connected, controller indicator breath light green which means it
charging, the indicator will turn off when fully charged.
5.Charge voltage/current: DC5V/<500mA
6.Charge time: about 2 hours
7.BT2.1 transmit distance: ≤8M
8.Standby time: keep for 30days when fully charged
Charge Controller/ Sleep function:
1. Applicable devices: P4 /P3 /Android(10.0 versions above) , iOS (13.0 versions above), Windows PC.
BT wireless connection, same way of connection as P4 official controller. Adopt high performance BT
wireless connection technology as “ BT2.1+EDR”. No delay response, strong anti-interference with
connection distance up to 8 meters. No need driver and freely connected without tedious code
matching process.
2. Build-in colorful breath LED indicate the working stage. Similar like P4 official controller, different
controller will be indicate by different color of LED indicator.
3. Build-in 2 motors in the grips effect vibration feedback during the game playing.
4. Build-in 3D acceleration sensor and gyroscope sensor which with six-axis induction function.
5. Build-in speaker and with 3.5mm earphone jack for connect earphone for gaming audio.
With dual-point capacitive touch panel.
6. Ergonomic design and extremely comfortable hand hold for gaming.
7. Supports PC USB online upgrade product program to adapts to the latest software and hardware
updates, thus effectively avoiding the unavailability of the product due to the game console system
update.
*Due to the official game platform software upgrade or source code changes and other not resist
factors caused of some games can not be played or connected with our gamepad, We have no
responsibility , and reserve the right of final interpretation.