Ipevo HDMI to VGA Converter User manual

Quick Start Guide
HDMI to VGA Converter The HDMI to VGA Converter gives you an easy way to connect
your Apple TV to VGA display devices like computer monitors and
projectors. The Converter transforms HDMI signal into VGA and
Audio signal. Please note that the Converter does not work in the
opposite direction. It does not convert VGA signal to HDMI signal.
HDMI Compatible Devices
The HDMI to VGA Converter is compatible with a wide variety of
HDMI devices, including but not limited to:
• AppleTV
• DVDandBlu-Rayplayers
• PCsandMacs
• GamingconsolessuchasthePlaystation3andXBox360
• iPad3andiPad2(withtheAppleDigitalAVadapter)
• Set-topcableboxes
Thank you for your purchase of the HDMI to VGA Converter. This
guide shows you how to begin using your Converter immediately.
Your package comes with the following:
• HDMItoVGAConverter
• ACadapter
Note: VGA cable, 3.5mm audio cable and HDMI cable, which may be
necessary depending on your setup, are NOT included.
Installing the HDMI to VGA Converter takes just a few steps:
1. PluginyourHDMIdevice'sHDMIcable(notincluded)intothe
HDMI port of the Converter.
2.Pluginyourmonitororprojector'sVGAcableintotheVGAport
oftheConverter.(VGAcablenotincluded.)
3.Ifyouareconvertingaudioaswellasvideo,connecta3.5mm
audiocable(notincluded)totheaudioportoftheConverter,
then connect the cable to your audio device.
4. Your HDMI device may provide sufficient power to the Converter.
Consult your HDMI device's manual for details. If your HDMI
device cannot power the Converter, connect the AC adapter to
theACportoftheConverterbox,thenplugintoanelectrical
outlet.
5. The Converter will now instantly transform HDMI signal into VGA
and Audio signal.
Overview
Package Contents Installing The Converter

For concerns or questions with this product, please send our
CustomerSupportdepartmentanemailat[e-mail].
Any questions?
TheHDMItoVGAConvertermaybeusedwithAppleTV(which
outputsinHDMI)andVGAdisplaydevices.ACadapterisnot
needed when converting signals from Apple TV because Apple TV
can power the Converter. Follow the steps outlined on Page 1 and
omitStep4tosetuptheConverterwithAppleTV.
In the event that an image does not appear when you connect the
HDMI to VGA Converter to Apple TV and your VGA display device,
press and hold both the Menu and Up buttons on your Apple TV
remotecontrol(seediagram)untiltheLEDindicatorontheApple
TVboxashes.
TheLEDashletsyouknowthatAppleTVisenteringBlackScreen
Recoverymode.AppleTVwillcyclethroughseveralresolutions
tondthebestmatchforyourdisplaydevice.Pleaseallow3to5
minutes for this process to complete and for an image to appear.
Using the Converter with Apple TV
Apple TV Troubleshooting
With an Apple Digital AV Adapter and the HDMI to VGA Converter,
youcandisplaycontentfromiPad(2ndand3rdgenerationsonly)
on VGA projectors and monitors. To do so:
1. PlugintheAppleDigitalAVAdapterintotheiPad2/iPad3
2.ConnecttheHDMIcable(notincluded)betweentheDigitalAV
Adapter and the HDMI to VGA Converter.
3.ConnectaVGAcablebetweentheHDMItoVGAConverterand
your projector or monitor's VGA input.
4. Plug in the AC adapter for the HDMI to VGA Converter.
5.Connecta3.5mmaudiocablebetweentheHDMItoVGA
Converter and your audio device if necessary.
Additionally,youcanplugyouriPad'spowercordintothe30-
pin connector on the Digital AV Adapter. This setup allows you to
charge your device while it is being used, which is ideal for long
sessions.
Using the Converter with Apple’s iPad
Press and hold
both the Menu
and Up buttons
on your Apple TV
remote control.
Note: Please note that a projector or monitor supporting resolution
720P and above is required for the image to properly display. Image
may not appear when connected to a projector or monitor that does
not support 720P resolution.