iPong V300 Guide

OPERATIONS MANUAL
USER GUIDE
Parts Descriptions............. 2
Assembly Instructions......... 2
Operational Instructions ...... 3
Settings Customization ..... 3-5
iPong Maintenance ........... 5
iPong Tilt Stand ............... 6
iPong Target Games........... 7
FAQ/Troubleshooting Tips. . 8-10
Warranty Information ....... .11

1. Remove all contents from the box.
2. Attach the agitator (B) to the top of the core engine (A) by aligning the
plastic rod on the core engine (A) to the hole on the bottom of the
agitator (B) and pressing down until secure.
3. Align the tabs on the bottom assembly (D) to the slots at the bottom of
the core engine (A). Insert and turn clockwise to lock.
4. Align the tabs on the top assembly (D) to the slots at the top of the core
engine (A). Insert and turn clockwise to lock.
5. Before plugging into the electric outlet, insert the A/C Adapter (C) into
the back of the core engine (A).
Quick Start Assembly instructions
THIS LIMITED WARRANTY IS AVAILABLE ONLY TO THE ORIGINAL PURCHASER OF THE IPONG TABLE TENNIS ROBOT
AND IS VALID IN THE UNITED STATES AND CANADA ONLY.
JOOLA’S LIABILITY IS LIMITED TOTHE REPAIR OR REPLACEMENT, AT ITS DISCRETION, OFANY DEFECTIVE IPONG
TABLETENNIS ROBOT AND DOES NOT INCLUDE ANY LIABILITY FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND.
THISWARRANTY IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED.
but you may alsohave other rights that vary from
state to state.
For questions regarding this Limited Warranty or the
IPONGTABLE TENNIS ROBOT, please write us:
iPong Customer Service Department
15800 CrabbsBranch Way Suite 250
Rockville, MD 20855
www.ipong.net
Reordering Parts
Please contact JOOLA North America, LLC via the online support form
and have the following information ready:
- Original Product number
- Part Number (from assembling instructions)
- Serial Number (from back of robot)
- Credit card information (number, expiration date, CVC code, billing
name and address) for payment processing (if after warranty)
- Shipping address for replacement parts
iPong Customer Service Department •
15800 Crabbs Branch Way Suite 250 • Rockville, MD 20855
iPong Registration
Registration must be completed within 10 days from the date of
your purchase of the iPong TableTennis Robot. You can access the
registration form online at the ipong.net website and submit your
information electronically.
What is Covered
Except as provided below, the Limited Warranty covers all defects in
materials and workmanship.
This Limited Warranty is void if the iPong Table Tennis Robot is:
•damaged through improper usage, negligence, misuse, abuse,
transportationdamage, acts of nature, or accident (including failure to
follow the instructions supplied with the iPong Table Tennis Robot)
• used in commercial applications or rentals
If during the Limited Factory Warranty period, any part or component of
the iPong Table Tennis Robot is found by JOOLA to be defective, JOOLA
the same or an equivalent model), allow the original retailer of the unit
to exchange the defective unit with a new unit (either the same or an
equivalent model), or refundthe originalpurchase price of the unit,
without charge for labor orparts. JOOLA’s obligation to repair, replace,
or exchange the unit, however, islimited to the amount of the original
purchase price of the iPongTable Tennis Robot.
LIMITED FACTORY WARRANTY
JOOLA North America, LLC (“JOOLA”) warrants iPong TableTennis Robots are free from defects in workmanship and materialsunder
normalpersonal use and conditions for aperiod of one year from the date of originalpurchase in the United States and Canada.
How to ObtainWarranty Service
In order to obtain warranty service under this Limited
Warranty, please follow the following steps:
- Usermust complete and submit the iPongTableTennis
Robot Registration within 10 days of purchase.
- Retain the original copy of the sales receipt.
- Call JOOLA’s Customer Service Department at (301)
816-3060 anytime from 9:00 am to 5:00 pm(EST) to
notify JOOLA of the nature of the problem and to
.JOOLA will decide
whether the iPong Table Tennis Robot may be serviced
at user’s location or at a location designated by JOOLA.
- If instructed to return the iPongTableTennis Robot to
JOOLA for servicing, useris responsible for shipping the
unit, at his/her own expense, to the address provided
by JOOLA in adequate packaging that will protect it
against further damage.
- Include owner’s name, address, daytime telephone
number, model number of the iPong Table Tennis
Robot, and a description of the problem.
- JOOLA will pay for any shipping charges to return the
repaired or replaced iPong Table Tennis Robot.
2 11
Contents of the Box
A. Core Engine - 1 B. Agitator - 1 C. A/C Adapter - 1 D.Top/Bottom Assembly
- 2
E. Wireless Remote - 1 F. Tilt Stand - 1
A
BA
D
A
C
D
M
OSCILLATION
TOPSPIN
BACKSPIN
O
FTB
FREQUENCY

Operational Instructions
NOTE: iPong should only be used with 40mm table tennis balls.
1. Place the assembled iPong V300 on the table, close to the back end and along
the middle line. Then, angle the projection hole to the desired left or right
position on the table.
2. Before turning on the iPong, make sure that there are no table tennis balls
inside the core engine. Rotate the agitator manually so that the round gap in
the agitator is not lined up with the ball entry hole. This will reduce the
possibility of jamming.
3. Dispense table tennis balls into the top assembly. 60-100 table tennis balls is
the recommended amount.
4. Press the power button and play/pause button immediately after.
This gives you time to adjust each setting on the remote to your preferences.
Then, press the play/pause button to start playing. Review the instructions
below on how to customize your settings.
Settings Customization
The iPong V300 uses an upper wheel and lower wheel to control ball spin,
speed, and trajectory. When the upper wheel spins faster than the lower wheel,
topspin is generated. When the lower wheel spins faster than the upper wheel,
backspin is generated. When both wheels are spinning at the same speed, the
ball is traveling across the table with no spin.
Topspin Ball Backspin Ball
Caption: Note: Due to varying conditions (ball size, dust, humidity, altitude, etc.), the remote control
settings provided for the iPong may not be exact. Adjust these settings to meet your desired need.
Top wheel
Bottom wheel
Top wheel spinning faster
creates topspin
Top wheel
Bottom wheel Bottom wheel spinning faster
creates backspin BACKSPIN
Understanding iPong Master V300 spin and control settings
4 0 7 3
4 0 3 7
Typical Master V300 setup for specific ball types:
Topspin balls:
TOPSPIN control between 5 and 7
BACKSPIN control between 2 and 4
Backspin balls:
TOPSPIN control between 2 and 4
BACKSPIN control between 5 and 7
Top wheel
Bottom wheel
Top wheel spinning faster
creates topspin
Top wheel
Bottom wheel Bottom wheel spinning faster
creates backspin BACKSPIN
Understanding iPong Master V300 spin and control settings
4 0 7 3
4 0 3 7
Typical Master V300 setup for specific ball types:
Topspin balls:
TOPSPIN control between 5 and 7
BACKSPIN control between 2 and 4
Backspin balls:
TOPSPIN control between 2 and 4
BACKSPIN control between 5 and 7
A ball is jammed or stuck inside the iPong?
-Unplug the iPong. Manually reach in and sh the ball out. You can
also tip the unit upside down and shake it gently to get the ball to
fall out.
Agitator tab broken?
-The agitator is a sensitive part and can break if the iPong is not
handled carefully. Once the agitator is broken, it cannot be xed
manually. Contact customer service for a replacement part.
Core engine is very loud?
-Power o the iPong and examine for any obstructions in the wheel
motors. Also, check that iPong is on a level surface to prevent the
motors from vibrating and moving around.
Last few balls in the top assembly aren’t shooting out?
-This is an indicator that it is time to reload the balls.
Does the iPong require any maintenance?
-It does not require any maintenance, although it is important to
make sure the wheels are clean and free from dust, hair, and pet
dander.
Balls lying around on the oor?
-Try our Table Tennis Ball Catch Net or Table Tennis Ball Pickup Net
to make collecting balls faster and easier. Available at
www.ipong.net under Accessories.
If your problem or question isn’t helped by any of these suggestions
please ll out the support request form at ipong.net
10 3

Topspin Settings
Start with the iPong in pause mode.
Using the plus buttons and minus
buttons, adjust each setting accordingly.
Frequency: “1” - Oscillation: “0” - Topspin: “3” - Backspin: “1”
For a stronger topspin, increase the Topspin setting to your
preference.
If the balls are not going over the net, increase the Backspin setting
incrementally and test until the balls start going over the net again.
Backspin Settings
Start with the iPong in pause mode.
Using the plus buttons and minus
buttons, adjust each setting accordingly.
Frequency: “1” - Oscillation: “0” - Topspin: “0” - Backspin: “4”
For a stronger backspin, increase the Backspin setting to your
preference.
incrementally and test until the balls start hitting the table again.
Frequency Settings
Frequency is the rate at which table tennis balls shoot out of the
iPong. The higher the Frequency setting, the greater the number of
balls shoot out per minute.“1” is the lowest frequency while “8” is the
highest frequency.
-Be sure you are using the correct sized balls. iPong robots work only
with 40mm table tennis balls, and work best with plastic table tennis
balls.
Balls not shooting at a consistent speed?
-Check to see that the A/C adapter is plugged in all the way.
-Be sure you are using the correct sized balls. iPong robots work only
with 40mm table tennis balls, and work best with plastic table tennis
balls.
-Try moving the iPong further back, closer to the edge of the table.
-Decrease the Backspin setting and/or increase the Topspin setting
incrementally and test until the balls start hitting the table again.
Balls are loaded but agitator is not moving?
-Remove some of the balls from the top assembly. Overloading the top
with balls may be too heavy for the agitator to rotate.
Balls getting jammed?
-Be sure you are using the correct sized balls. iPong robots work only
with 40mm table tennis balls, and work best with plastic table tennis
balls.
-The maximum ball capacity of the top assembly is 100 balls. 60-100
table tennis balls is the recommended amount.
-If the round gap on the agitator stops directly above the ball entry
hole, multiple balls could enter into the core engine at once and stall.
and agitator gap aligned.
Balls getting jammed immediately after reloading?
-This is often caused by the Topspin and/or Backspin settings starting at
.
balls from the core engine and top assembly. Let the iPong run empty,
making sure that the Topspin and Backspin settings are set to “1” or
higher. Then, reload the balls while the iPong is running.
4 9

FAQ/Troubleshooting Tips
Be sure to visit our website at www.ipong.net and register your iPong
robot when you purchase it to activate your warranty. If you experience a
usage issue with your unit, you can go through our list of common issues
and their solutions below. If your problem persists, please ll out the
support form on our website www.ipong.net.
Having trouble with Topspin/Backspin settings?
-Remember that when the Topspin and Backspin settings are the same,
no spin is generated on the ball.
- Check the Settings Customization in the beginning of the user guide.
iPong won’t turn on?
-Check to see that the A/C adapter is plugged in all the way.
Core engine not running?
-Check to see that the A/C adapter is plugged in all the way.
-Unplug A/C adapter. Take the agitator o to see if there are obstructions
(dust, hair, pet dander, etc.) keeping the motor from spinning. Remove
any obstructions, re-plug A/C adapter and try again.
Rubber wheels not spinning?
-Check to see that the A/C adapter is plugged in all the way.
-Unplug A/C adapter. Remove top and bottom assembly. Remove front
plastic casing by pressing the top and bottom tabs. Check to see if there
are any obstructions (dust, hair, pet dander, etc.) keeping the rubber
wheels from spinning. Remove any obstructions, re-plug A/C adapter
and try again.
Balls hitting the side of the projection hole?
-Be sure you are using the correct sized balls. iPong robots work only with
40mm table tennis balls, and work best with plastic table tennis balls.
Balls falling out of projection hole, not shooting?
-Be sure you are using the correct sized balls. iPong robots work only with
40mm table tennis balls, and work best with plastic table tennis balls.
8 5
Oscillation (Side-To-Side) Settings
Oscillation is the setting used for shooting balls to random
locations on the table. The higher the Oscillation setting, the faster
the iPong side-to-side motion. “1” is the slowest oscillation while “8”
is the fastest oscillation.
The Memory Function
The iPong V300 has the ability to save your favorite
settings.
When you have your favorite settings tuned on the iPong V300,
press the pause button on the remote, followed by
pressing the memory button.
When you want to recall your saved setting, make sure you’re in
play mode and press the memory button. You’ll notice that
the iPong V300 changes to your saved settings.
To change your saved settings, repeat steps 1 and 2 above.
iPong Maintenance
• After each use of the iPong, we suggest you remove the power adaptor.
• Clean the balls used in the iPong after several uses. (Balls will collect dust on the
surface, and this might aect the function of the iPong).
• Wipe the iPong after several uses, and put it back into the box (or a bag) to avoid
collecting dust.
• Clean the wheels of iPong often! This is an important step in maintaining this
product. Wet a clean cloth with water, or alcohol, and wipe the wheels a few
times by running the cloth along the surface of the wheel.
• Clean the motor under the agitator. First, disassemble the horn, then pull the
agitator straight up lightly, to remove the agitator. You will see dust or hair
around the motor. Carefully remove with a clean cloth.

The iPong Tilt Stand is a
multi-tiered iPong elevation tool,
designed to change ball
trajectory and increase shot
variation. Three heights are
available: 9mm,17mm, or 26mm.
The tilt stand is especially useful
when setting the iPong to shoot
slow balls, or fast backspin balls -
that otherwise might NOT go over the net. A bit of experimentation will be required.
With the tilt stand on the front of the iPong, go up in elevation if balls go into the
net. And go down in elevation if balls go o the table.
6 7
IPONG TARGET GAMES
An iPong Target set is available for FREE if you complete the steps
outlined on the card included in the box. The iPong Target set include 3
targets: Small, Medium, and Large. Below are several games which can
be played using these targets.
A. One, Two, Three.
Place the large target in the left corner of the table. The medium
target in the middle (on the centerline). And the smallest target on
the far right hand corner of the table. Turn on the iPong and aim for
the large target rst. Once you hit this one, then aim for the medium
target. And then nally aim for the small target on the far right. This
game is fun and will improve your accuracy in controlling the
horizontal placement of your shots.
B. The Tower
Stack the three targets on top of each other, with the largest target
on the bottom. The medium-sized target in the middle. And the small
target on top. This target ’Tower’can be placed anywhere on the
table. Turn on the iPong and aim for the small target rst. Once you
hit this one, then aim for the medium target. And then nally aim
for the large target on the bottom. This game is fun and will improve
your accuracy in controlling vertical placement of your shots.
C. Speed Pong
For this game you will set the frequency of the iPong to it’s maximum.
The the targets can be placed anywhere on the table. Turn on the
iPong, and see how quickly you can knock down each of the targets.
This game is fun and will improve your hand-eye speed.
Another variation of the above game can be played with another
player, by using a timer to count how long it took each of you to
knock down the three targets. Quickest time wins.
If ball doesn't go over the net, first correct by
increasing the TOPSPIN control. And test again.
If needed, then increase the BACKSPIN control.
And test again.
If ball goes off the table, first correct by decreasing
the TOPSPIN control. And test again.
If needed, then decrease the BACKSPIN control.
4 0 7 3
4 0 6 2
Using the iPong Tilt Stand
The iPong Tilt Stand is a multi-tiered iPong elevation tool,
designed to change ball trajectory and increase shot variation.
Three heights are available: 9mm,17mm, or 26mm. The tilt stand
is especially useful when setting the iPong to shoot slow balls, or
fast backspin balls - that otherwise might NOT go over the net. A
bit of experimentation will be required. With the tilt stand on the
front of the iPong, go up in elevation if balls go into the net. And
go down in elevation if balls go off the table.
V300 control adjustments for ball errors
For slower balls, position iPong near center of
table. Start with tilt stand in lowest position,
and adjust upward as needed.
For fast backspin balls, position iPong near
end of table. Start with tilt stand in highest
position, and adjust downward as needed.
Advanced: Place tilt stand on rear of
iPong. Use for very fast topspin balls.
Position iPong near end of table - OR
in middle of table! Start in lowest
position, and adjust upward as needed.
USING THE IPONG TILT STAND
If ball doesn't go over the net, first correct by
increasing the TOPSPIN control. And test again.
If needed, then increase the BACKSPIN control.
And test again.
If ball goes off the table, first correct by decreasing
the TOPSPIN control. And test again.
If needed, then decrease the BACKSPIN control.
4 0 7 3
4 0 6 2
Using the iPong Tilt Stand
The iPong Tilt Stand is a multi-tiered iPong elevation tool,
designed to change ball trajectory and increase shot variation.
Three heights are available: 9mm,17mm, or 26mm. The tilt stand
is especially useful when setting the iPong to shoot slow balls, or
fast backspin balls - that otherwise might NOT go over the net. A
bit of experimentation will be required. With the tilt stand on the
front of the iPong, go up in elevation if balls go into the net. And
go down in elevation if balls go off the table.
V300 control adjustments for ball errors
For slower balls, position iPong near center of
table. Start with tilt stand in lowest position,
and adjust upward as needed.
For fast backspin balls, position iPong near
end of table. Start with tilt stand in highest
position, and adjust downward as needed.
Advanced: Place tilt stand on rear of
iPong. Use for very fast topspin balls.
Position iPong near end of table - OR
in middle of table! Start in lowest
position, and adjust upward as needed.
If ball doesn't go over the net, first correct by
increasing the TOPSPIN control. And test again.
If needed, then increase the BACKSPIN control.
And test again.
If ball goes off the table, first correct by decreasing
the TOPSPIN control. And test again.
If needed, then decrease the BACKSPIN control.
4 0 7 3
4 0 6 2
Using the iPong Tilt Stand
The iPong Tilt Stand is a multi-tiered iPong elevation tool,
designed to change ball trajectory and increase shot variation.
Three heights are available: 9mm,17mm, or 26mm. The tilt stand
is especially useful when setting the iPong to shoot slow balls, or
fast backspin balls - that otherwise might NOT go over the net. A
bit of experimentation will be required. With the tilt stand on the
front of the iPong, go up in elevation if balls go into the net. And
go down in elevation if balls go off the table.
V300 control adjustments for ball errors
For slower balls, position iPong near center of
table. Start with tilt stand in lowest position,
and adjust upward as needed.
For fast backspin balls, position iPong near
end of table. Start with tilt stand in highest
position, and adjust downward as needed.
Advanced: Place tilt stand on rear of
iPong. Use for very fast topspin balls.
Position iPong near end of table - OR
in middle of table! Start in lowest
position, and adjust upward as needed.
If ball doesn't go over the net, first correct by
increasing the TOPSPIN control. And test again.
If needed, then increase the BACKSPIN control.
And test again.
If ball goes off the table, first correct by decreasing
the TOPSPIN control. And test again.
If needed, then decrease the BACKSPIN control.
4 0 7 3
4 0 6 2
Using the iPong Tilt Stand
The iPong Tilt Stand is a multi-tiered iPong elevation tool,
designed to change ball trajectory and increase shot variation.
Three heights are available: 9mm,17mm, or 26mm. The tilt stand
is especially useful when setting the iPong to shoot slow balls, or
fast backspin balls - that otherwise might NOT go over the net. A
bit of experimentation will be required. With the tilt stand on the
front of the iPong, go up in elevation if balls go into the net. And
go down in elevation if balls go off the table.
V300 control adjustments for ball errors
For slower balls, position iPong near center of
table. Start with tilt stand in lowest position,
and adjust upward as needed.
For fast backspin balls, position iPong near
end of table. Start with tilt stand in highest
position, and adjust downward as needed.
Advanced: Place tilt stand on rear of
iPong. Use for very fast topspin balls.
Position iPong near end of table - OR
in middle of table! Start in lowest
position, and adjust upward as needed.
If ball doesn't go over the net, first correct by
increasing the TOPSPIN control. And test again.
If needed, then increase the BACKSPIN control.
And test again.
If ball goes off the table, first correct by decreasing
the TOPSPIN control. And test again.
If needed, then decrease the BACKSPIN control.
4 0 7 3
4 0 6 2
Using the iPong Tilt Stand
The iPong Tilt Stand is a multi-tiered iPong elevation tool,
designed to change ball trajectory and increase shot variation.
Three heights are available: 9mm,17mm, or 26mm. The tilt stand
is especially useful when setting the iPong to shoot slow balls, or
fast backspin balls - that otherwise might NOT go over the net. A
bit of experimentation will be required. With the tilt stand on the
front of the iPong, go up in elevation if balls go into the net. And
go down in elevation if balls go off the table.
V300 control adjustments for ball errors
For slower balls, position iPong near center of
table. Start with tilt stand in lowest position,
and adjust upward as needed.
For fast backspin balls, position iPong near
end of table. Start with tilt stand in highest
position, and adjust downward as needed.
Advanced: Place tilt stand on rear of
iPong. Use for very fast topspin balls.
Position iPong near end of table - OR
in middle of table! Start in lowest
position, and adjust upward as needed.

Visit www.ipong.net
Ball Catch Net
• Collects balls during serve, multi-ball, or
robot practice
• Additional side netting for increased coverage
• Durable with steel frame and 100%
polyester net
iPong Balls
• 100 orange training balls
• Reusable box with convenient carrying straps
Ball Pickup Net
• Innovative and collapsable triangle head
• Retractable handle for portability and
convenience
Accessorize your iPong