IQ JoinGroup AVS200 User manual

JoinGroup AVS200
Attentions
Packing List Product Overview
How to Use
Install with Caution
Do not expose the product to rain or moisture.
To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
Do not use the product beyond the specified temperature, humidity or power supply
specifications.
Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild
detergent if needed. Do not use strong or corrosive detergents to avoid scratching the
lens and affecting the image.
To prevent damage to this product or any product connected to it, this product can only
be used within the specified range.
Do not rotate the camera head violently, otherwise it may cause mechanical failure.
This product should be placed on a stable desktop or other horizontal surface. Do not
install the product obliquely, otherwise it may display inclined image.
Housing of this product is made of organic materials. Do not expose it to any liquid, gas
or solids which may corrode the shell.
Ensure there are no obstacles within rotation range of the holder.
Do not power on before completing installation.
1.Optional expansion microphone port 1
2.Optional expansion microphone port 2
3.DIN6 cable port
4.LED Status indicator
5.Bluetooth indicator
6.Function keys
7.Volume indicator
1.Status indicator
2.Power indicator
3.DIN6 Cable port
1. DIN6 Cable port
2. USB port
3. Power port
4. Turn on/off
5. Status indicator
1.Speakerphone Speakerphone
Camera Hub
2.Camera
3.Hub 4.Remote Control
5.5m DIN6 Cable * 2 pcs 6.3m USB cable *1 pcs
7.Power supply
3C
12
3C
12
12 3
43C
12
5
6
7
13
2
5
4
3
2
1
Quick Guide

Remote Control
Speakerphone
The LED Status indicator
description
Connection
1.Connect the camera and Hub with the original DIN6 data cable;
2.Connect the speakerphone and Hub with the original DIN6 data cable;
3.Connect the power supply equipment with the original power adapter;
4.Connect one end of the USB cable to the USB port of the computer and video
conference system, and connect the other end to the USB socket of the Hub;
5. Turn on the power switch after the connection was confirmed correct, and wait
for the speakerphone and Camera self-check completed, turn on the terminal
third-party conference software, and select the corresponding Camera, microphone
and speaker driver to start the audio and video conference with the device.
1: Volume down
2: Volume up
3: Pan / Tilt
4: OK
5: Zoom out
6: Zoom in
7: 1-2 Camera presets
8: Hang up
9: Mute microphone
10: Pick up
11: Turn on/off Bluetooth
Presets button
Remote control button
Zoom in/out
Camera pan / tilt
Volume button
Bluetooth button
End call
Answer call
Mute microphone
Echo cancellation
Status indicator
Volume indicator
Bluetooth indicator
Blue LED light
Red LED light
Blue LED light
Red light
The higher the volume, the
more the number of lights
1.Turn on the Bluetooth, the
green light flashes
2.Bluetooth connection,
green light is always on
Y type Bluetooth
indicator
Speaker mute
USB connection
Microphone mute status
Keys Description
Connection steps
USB cable
DIN6 cable
Power Supply
DIN6 cable
12
3
4
56
78
910
11
3C
12
+
+