IRAGO Razr H5 User manual

USER MANUAL
H5
Wireless Headphone
Overview
1. Previous track/ volume down button
2. ON/ OFF/ Pause/ Play
3. Next track/ volume up button
4. Line in audio port
5. Built-in microphone
6. Headphone charging port
7. LED Indicator Light
Wireless mode
Turning on and off
Press button for 3 seconds to turn headphone on.
wireless is on by default. When the blue and red light starts blinking it begins pairing mode.
Press button for 3 seconds to turn off.
If voltage is low, the red light will blink fast and then the headphone will turn off.
***Your headphone must be paired to a wireless device before it can be used***
Pairing the headphone with wireless devices.

1. To enter pairing mode, press the button for 3 seconds until red and blue LED light are
blinking, now the headphone is in pairing mode.
2. Pairing the headphone with wireless device; pairing name: RAZR H5
Play/Pause
Pause: Short press button when the music is on, the music will pause.
Play: Short press it again to play the music.
Next Track / Volume up
When music is on,
Short press button to play the next song automatically, long press button to
turn up the volume
Previous track / Volume down
When music is on
Short press button to hear the previous song,
Long press button to turn down the volume
Answer the call/ Hang up/dial

1. To answer a call, press button.
2. To hang up a call, double press button. If the other caller hangs up you do not need to
press button to hang up.
3. In the wireless mode, double press button to call the last dialed number (the last
number dialed is recorded automatically).
When making a phone call or answering a call in wireless mode, the music will pause
automatically. Once the call has ended the music will continue to play automatically.
Use As a Wired Headphone
To use as a wired headphone, turn wireless function off (power off position).
Plug one end of the audio cable into the line in audio port on the headphone and the other end
into any audio device with a standard 3.5mm headphone jack.
Charging
***You must completely charge your wireless headphone before the first use***
1. Insert the charger cable into the charging port on the wireless headphone and then into any
powered USB port.
2. The red LED light will stay on while the headphone are charging and will turn off completely
when the headphone are ready for use.