Iris Innovations IRIS036 User manual
Regulatory Information
Disposal of Waste Equipment by Users in Private Household in the European Union.
This symbol on the product or its packaging indicates that it must not be disposed of with
your other household waste. Instead, it is your responsibility to dispose of your waste
equipment
by handing it over to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment. For more information about
where you can drop off your waste equipment for recycling please contact your local city
office, your
household waste disposal service or the shop where you purchased the product.
This device has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance
with the instructions, may cause harmful interference to radio or television reception.
However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorientate or
relocate the receiving antenna; Increase the separation between the equipment and
the receiver, connect the equipment to an outlet on a different circuit from that to which
the receiver is connected; consult the dealer or an experienced radio / TV technician
for help.
We hereby declare that the product is in compliance with the essential requirements
and other relevant provisions of European Directive 2004/108/EC, the RoHS Directive
2011/65/EU.
Iris Innovations
IRIS460 User Guide v1.0 Jul17!2
IRIS436 User Guide
(C) 2017 Iris Innovations Limited.
ALL RIGHTS RESERVED
Any and all information, including, among others, wordings, pictures, graphs are the properties of IRIS IN-
NOVATIONS., Ltd. or its subsidiaries (hereinafter referred to be “IRIS”). This user manual (hereinafter re-
ferred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by
any means, without the prior written permission of IRIS. Unless otherwise stipulated, IRIS does not make
any warranties, guarantees or representations, express or implied, regarding to the Manual.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND IRIS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL IRIS, ITS DIRECTORS, OFFICERS, EMPLOY-
EES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDI-
RECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF IRIS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAM-
AGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. IRIS SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OP-
ERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, IRIS WILL PRO-
VIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JU-
RISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. IRIS SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
v1.00/17-01-18
Iris Innovations Unit 15 Fareham Innovation Center, Meteor Way, Lee on Solent. Hampshire PO13 9FU T +44(0)2392 556509 www.boat-cameras.com
Warnings & Important Product
Information
WARNING: Installation and Operation
This product must be installed and operated in accordance with
these instructions. Failure to do so may result in poor product
performance, damage to the product or vessel and or personal
injury. Installation should only be carried out be qualified per-
sonnel or by persons competent in electrical systems.
WARNING: Power Supply and Grounding
Ensure the boats power supply is switched off during installa-
tion. Ensure suitably rated circuit breakers / fuses are used in
the installation of the product in accordance with the electrical
values shown in the technical specifications of the product.
Never switch on power until the power connections are correctly
terminated in accordance with the information provided in this
document. Do not connect or disconnect the product with the
power supply switched on. Never disconnect the DC ground with
the power supply on.
WARNING: Wiring terminations
Where the products video, power and data terminations are
extended, ensure that suitable connectors are used and that the
point of termination for each cable is adequately protected
against moisture ingress. Ensure correct polarity is strictly ob-
served. Do not cut or remove cable connectors without prior
permission from Iris Innovations Limited.
WARNING: Do Not Open the Unit
There are no user serviceable parts within the product so there s
no need to open the device. The product has been certified to
IP66 standards, however, submersion or the product or expo-
sure to high pressure washing will invalidate the warranty.
WARNING: Disclaimer
This product is intended to be used only as an aid to navigation
and must never be used as an alternative to correct navigational
practices and judgements made on the basis of approved navi-
gation methods. It is the users responsibility to observe correct
and proper navigational skill when using this product. Only offi-
cially approved charts and notices to mariners contain the cur-
rent information required for safe navigation.
Operating the camera or viewing the video input whilst the ves-
sel is moving could cause a distraction and result in accidental
collision resulting in property damage, injury or death. Iris Inno-
vations cannot be held liable for any incidental, special, indirect
or consequential damages whether resulting from the use, mis-
use or inability to use this product.
CAUTION: Switch Camera Off When Not in Use.
To prolong the operation life of the the cameras sensor we
strongly advise that power to the camera is routed via a dedi-
cated switch.
CAUTION: Service and Maintenance
This product contains no user serviceable parts. Please refer all
maintenance and repair issues to your authorized Iris Innova-
tions dealer. Any unauthorized work to the product may affect
the warranty.
CAUTION: Care and Cleaning
This product is a sensitive piece of electronic, imaging equip-
ment and must be handled and treated accordingly. Do not drop
or shake the unit during installation. Avoid exposure of the im-
ager to direct sunlight where possible as this may degrade the
cameras performance over time.
When cleaning the device, ensure power is switched off. Clean
the camera housing with a soft cloth. Moisten the cloth and use
a mild detergent if required. The lens window has a protective
coating which may suffer damage as a result of improper clean-
ing. To clean the lens window use a soft cotton cloth. Moisten
with clean water if necessary. For further advise on cleaning the
lens window, contact Iris Innovations.
INFORMATION: Product Disposal and Recycling
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE) Direc-
tive requires the recycling of waste electronic and electrical
equipment. Iris Innovations supports the WEEE policy and po-
litely request you observe correct disposal methods. For further
information on how to correctly dispose of this product please
contact Iris Innovations.
Please recycle unwanted packaging and documentation. The
cardboard carton, all paper manuals and documents and the
protective plastic bag in which the camera is shipped are widely
recyclable. Please check with your local recycling plant for con-
firmation.
v1.00/17-01-18
Iris Innovations Unit 15 Fareham Innovation Center, Meteor Way, Lee on Solent. Hampshire PO13 9FU T +44(0)2392 556509 www.boat-cameras.com
Introduction
Thanks for buying the IRIS036 Miniature IP Dome Camera from
Iris Innovations.
The IRIS036 is a stylish and robust recess mounting marine
camera which can be used for a multitude of applications, from
monitoring decks and companionways, engine rooms and
bathing platforms to cabins, saloons and cabins.
With its compact form factor, the IRIS036 looks at home on
luxury craft as well as in commercial boating applications and
features a high polish marine grade A316 stainless steel casing.
The IRIS036 camera module features a high end sensor
delivering crisp analogue video which can be viewed on any
chart-plotter or screen with a composite video input and is
available in both PAL and NTSC formats.
Overview of Key Features
Hereʼs a brief list of some of the IRIS436ʼs key features:
•1000TVL Resolution
•Mechanical IR Cutout filter for True Day / Night Operation
•Low Power 12VDC Operation <100mA
•IP66 Ingress Protection
•Small, Compact Housing
•Marine Grade A316 Stainless Steel Housing
•Suitable for Multiple Applications, such as on-board security,
sports fishing, engine room monitoring and vehicle
monitoring.
•Wide Operating Temperature Range
•Compatible with chart plotters with composite video inputs.
Contents of Package
Please unpack your IRIS036 and check to make sure the follow-
ing items are included. If there are any items missing please
contact your Iris dealer:
•1 x IRIS036 Marine Mini Dome Camera
•1 x Fixing Pack
•1 x Instruction Manual
•1 x DC Connector pack (1 x male / 1 x female)
v1.00/17-01-18
Iris Innovations Unit 15 Fareham Innovation Center, Meteor Way, Lee on Solent. Hampshire PO13 9FU T +44(0)2392 556509 www.boat-cameras.com
Camera Dimensions
Iris Innovations
IRIS460 User Guide v1.0 Jul17!6
&
'
(
%
)
$
&
)
(
$
%
'
'5$:1
&+.'
$339'
0)*
4$
81/(6627+(5:,6(63(&,),('
',0(16,216$5(,10,//,0(7(56
685)$&(),1,6+
72/(5$1&(6
/,1($5
$1*8/$5
),1,6+
'(%855$1'
%5($.6+$53
('*(6
1$0(
6,*1$785(
'$7(
0$7(5,$/
'21276&$/('5$:,1*
5(9,6,21
7,7/(
':*12
6&$/(
6+((72)
$
:(,*+7
,5,6;
Installation
WARNING!
Only trained electrical installers or competent persons
should install this product. Incorrect installation could lead
to personal injury or death and/or damage to property.
Ensure the electrical regulations specific to your region are
observed, and observed wiring colour conventions.
Ensure the cameras power supply is connected via a
suitably rated fuse or circuit breaker.
Switch off the power supply you are working on whilst
installing the camera, until the product is correctly installed.
Step 1:
Decide the mounting position of your camera and use a
small drill to make a pilot hole where the center of your
camera will be installed.
TIP!
Power up camera and check to ensure you have the
desired field of view prior to drilling any holes and mounting
the camera in place.
Step 2:
Use a 62mm hole saw to drill the hole necessary to fit the
camera body. Prior to drilling, ensure it is safe to do so and
there are no cable runs behind the panel.
Step 3:
Offer the camera up into the hole you have just made,
ensuring that you will be able to sufficiently adjust the
camera module position prior to screwing the housing into
place. The camera module within the housing has limited
‘Pan’ axis adjustment so ensure you can manipulate the
camera to the desired position before proceeding. Twist
the camera as desired then mark off the fixing holes ready
for drilling your pilot holes.
TIP!
Use a CCTV tester if available (or connect to your plotter or
a test laptop) to ensure the correct field of view is achieved
before screwing the camera housing into place.
Step 4:
Present your cables to the camera through the hole you’ve
just drilled. The camera operates at 12VDC and draws
extremely low current. We recommend you use an 18AWG
pair for +DC and DC GND. For the video signal, use a 75Ω
coaxial cable such as RG59, URM70, RG6. For marine
applications we recommend the conductor is stranded.
Use waterproof tape /self amalgamating tape to protect
the video and power termination and ensure moisture does
not penetrate the connections.
Iris offer a range of power, video and combined power/
video cables. When combining with Balun adapters, you
can also use a single CAT5e/CAT6 cable for power and
data. Contact your Iris dealer for more information.
WARNING!
Ensure the camera power is connected via a suitably
rated fuse or breaker to avoid damage to the vessel
or personal injury.
Step 5:
Slide the ‘slack’ cable from the camera back through the
hole in your panel, ensuring connectors are still in tact and
sit the inner dome onto the protective foam / rubber ring
on the base.
Step 8:
Offer the camera up into the hole you have made, line up
the fixing holes with your screw pilot holes (if you’ve made
them) and screw firmly into place.
Step 9:
Adjust the pan and tilt position of the camera module as
desired. Once the camera is pointing in the correct
position, lock the camera module adjustment screws into
place to prevent the camera module moving under
vibration. Power up the camera and test to ensure you are
happy with the final position. Leave the camera running for
30 minutes without the dome cover and then finally
carefully screw the bezel cover into place, taking care to
avoid cross-threading.
v1.00/17-01-18
Iris Innovations Unit 15 Fareham Innovation Center, Meteor Way, Lee on Solent. Hampshire PO13 9FU T +44(0)2392 556509 www.boat-cameras.com
v1.00/17-01-18
Iris Innovations Unit 15 Fareham Innovation Center, Meteor Way, Lee on Solent. Hampshire PO13 9FU T +44(0)2392 556509 www.boat-cameras.com
Iris Innovations Limited
Unit 15 Fareham Innovations Center, Meteor Way
Lee on Solent. Hampshire PO13 9FU. United Kingdom
Iris Innovations USA Corporation
2821 SW23rd Terrance Unit 5
Fort Lauderdale, 33312. Florida. USA
www.boat-cameras.com
This manual suits for next models
1
Table of contents
Other Iris Innovations Digital Camera manuals
