ISIC DuraMON 55 GLASS Assembly instructions

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 1
DuraMON 55 GLASS
User Reference Manual

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 2
Disclaimer
ISIC A/S makes no representation or warranties with respect to the contents or use of this manual,
and specifically disclaims any express or implied warranties of merchantability or fitness for any
particular purpose. Further, ISIC A/S reserves the right to revise this publication and to make
changes to its content at any time, without obligation to notify any person or entity of such revisions
or changes.
Image sticking: If the monitor is operated with static images (logo’s etc.) it will inevitably lead to
images sticking on the display. This is not a permanently situation and can be removed by
operating the monitor with a video that is created for this purpose.
FCC Warning
Computing devices and peripherals generate and radiate radio frequency energy, and if not
installed and used in accordance with the instructions advised by ISIC A/S, it may cause
interference to radio communication.
The DuraMON series, manufactured by ISIC A/S, is designed to comply with the emerging generic
EEC standards, that cover applications in maritime environment.
Classification
The monitor is classified as “protected from the weather” according to IEC 60945 ed.4 (former class
b).
Approvals
Approval according to IACS E10 ed. 6 and IEC 60945 ed. 4, Maritime navigation and radio
communication equipment and systems –General requirements.
ECDIS IEC 61174 ed. 4 compliant.
Radar IEC 62288 ed. 2 compliant.
Radar IEC 62388 ed. 2 compliant.
ISIC A/S is complying with the WEEE directive within the European Union, stating that electronic and
electric products must be collected separately.
Products are marked according to the directive.
Copyright 2017 ISIC A/S
ISIC A/S
Edwin Rahrs Vej 54
DK-8220 Brabrand
Denmark
Phone: [phone]
Fax: [phone]
Web: http://www.isic-systems.com

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 3
Table of Contents
1FEATURES...............................................................................................................................................................4
2GENERAL CONSIDERATIONS ON INSTALLATION AND OPERATION ..................................................5
3DURAMON 55 GLASS CONNECTIONS .............................................................................................................5
4DURAMON 55 GLASS FRONT PANEL CONTROLS (ECDIS AND RADAR)...............................................6
4.1 DURAMON 55 GLASS FRONT:...........................................................................................................................6
5SERIAL CONNECTION PIN-OUT.......................................................................................................................7
6CONSOLE UP/DOWN/TILT CONNECTION PIN-OUT....................................................................................7
7TECHNICAL SPECIFICATIONS DURAMON 55 GLASS ................................................................................8
8MECHANICAL OUTLINE DURAMON 55 GLASS............................................................................................9
9MECHANICAL OUTLINE WALL MOUNT .....................................................................................................10
10 ECDIS MODE.....................................................................................................................................................11
11 DURA SERIAL COMMUNICATION PROTOCOL......................................................................................11
12 COMPASS SAFE DISTANCE..........................................................................................................................11
13 POWER CONSUMPTION................................................................................................................................11
14 INRUSH CURRENT..........................................................................................................................................12
1POPUP MENU........................................................................................................................................................13
2ADVANCED OSD ..................................................................................................................................................14
2.1 PICTURE.............................................................................................................................................................14
2.2 PICTURE IN PICTURE..........................................................................................................................................16
2.3 SETUP................................................................................................................................................................17
2.4 MONITOR INFO ..................................................................................................................................................19
2.5 OSD SETTINGS..................................................................................................................................................19
3TROUBLESHOOTING.........................................................................................................................................21
4SERVICING THE UNIT .......................................................................................................................................21
5TERMS, ACRONYMS AND ABBREVIATIONS...............................................................................................21
6ISIC INFO / SUPPORT .........................................................................................................................................22
7REVISION HISTORY ...........................................................................................................................................23
8APPENDIX A: PIXEL POLICY...........................................................................................................................24

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 4
1Features
Congratulations on your purchase of a DuraMON 55 GLASS. This short form manual is designed to
get you started working with your new DuraMON 55 GLASS.
The DuraMON 55 GLASS monitor is made as rugged monitors especially designed for the
demanding operating conditions at sea.
The DuraMON 55 GLASS is tested for full compliance to marine-standards IACS E10 and IEC 60945.
The monitor comes with excellent brightness and contrast levels that, together with wide viewing
angles, ensure a good readability thus making it very eye-friendly. For the best picture quality,
always use a double shielded cable with ferrites, like the one supplied with the monitor.
Direct dimming control (1cd to100%) from UP/DOWN buttons (except ECDIS models).
Full settings control via menu or serial link.
IP65 protected front.
Multiple connections to cover the widest range of signal sources:
Display Port x 2
HDMI x 2
DVI-D
VGA
Optional Touch Screen available, but has to be ordered with the monitor.

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 5
2General considerations on Installation and
Operation
The DuraMON GLASS is designed to work at conditions according to IEC 60945. However, keeping
the temperature and vibration level at a minimum will extend the life time of the product. ISIC
recommend operating this product at normal room temperature (20-25 °C), with the minimum of
direct sunlight, vibration and humidity.
Operation of the DuraMON 55 GLASS
To ensure that colors and luminance on the display are correct in ECDIS applications, do not use
the monitor until the warm-up period has completed.
The warm-up period is as follows:
Day mode
Dusk mode
Night mode
DuraMON 55 GLASS
30 min
30 min
30 min
3DuraMON 55 GLASS connections
Below is a view of optional connections to the monitor. The default inputs are: power, RS-232,
DP / HDMI, DVI and VGA.
Audio in
Audio out
Touch USB VGA DP1
HDMI2
DVI
Power AC USB extern in
Lift and tilt control
M6 ground pin
DP2 HDMI1
RS232

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 6
4DuraMON 55 GLASS front panel controls
(ECDIS and Radar)
The front panel is illuminated and will follow the brightness level of the monitor backlight.
4.1 DuraMON 55 GLASS front:
STATUS:
This LED will illuminate green when the monitor is powered on and red when the monitor is powered
down. The LED will be red if no active signal is found.
ECDIS:
The LED will ONLY illuminate when the backlight level is at calibrated setting AND ONLY on an ECDIS
calibrated port.
Touch On/Off:
This button will activate or disable the touch sensor, there will be a text “Touch” that will light when
the touch is in-active. Be aware that it might take some seconds from enabling the touch to
computer detects it.
ON/OFF:
This key is used to turn the product on or off. Pressing it will turn the power on, while holding it
pressed down for 5 seconds will turn the power off. The status light will change from green to red to
indicate it’s powered down. It is important to notice that, when powered off, the product still
consumes some power from the mains. To cut off the power from the product it is necessary to
unplug its power cord from the mains.
Enter:
Use this to select the highlighted item in OSD menu.
UP/DOWN:
Used to adjust backlight or to navigate and adjust settings in menus. Pressing UP and DOWN
together will restore the backlight level to the last selected ECDIS mode by the serial link. (See
document 04924-001 for protocol details).
Menu:
To activate the OSD menu, press “Menu”.
See Popup Menu section for details.

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 7
5Serial connection pin-out
Pin
RS-232
SUB-D 9-pol female
1
2
RX
3
TX
4
5
GND
6
7
8
9
Mating connector 9 pin D-Sub male.
6Floor stand Up/Down/Tilt connection pin-
out
Pin
Function
SUB-D 9-pol
male
1
Tilt Down
2
Raise Down
3
Raise Up
4
Tilt Up
5
Gnd
6
Raise
Common
7
Tilt Common
8
NC
9
NC
Mating connector 9 pin D-Sub female.

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 8
7Technical specifications DuraMON 55
GLASS
DuraMON GLASS I/O
Video inputs:
1 x VGA: Up to 1920 x 1080 @ 60Hz
1 x DVI: Up to 1920 x 1080 @ 60Hz
2 x Display Port 1.2a: Up to 3840 x 2160 @ 60Hz
2 x HDMI 1.4: Up to 3840 x 2160 @ 30Hz
Recommended resolution is 3840 x 2160
Generally all VESA compatible video modes are supported.
External USB
Control inputs:
1x RS-232 –for remote control.
1x USB for touch sensor (optional).
1 x Raise up/down & tilt
DuraMON GLASS Power Supply Options
Standard:
90-260Vac 50-60Hz Input
DuraMON GLASS Environmental Conditions
Operating Temperature:
-15 to 55 °C
Storage Temperature:
-25 to 70 °C
Relative Humidity:
8 to 90 %
DuraMON GLASS Approvals
Marine:
ECDIS, Radar:
Type Approvals:
IEC 60945 Ed. 4, 2002-08 & IACS E10 Rev. 6 Oct. 2014
IEC 61174 ed. 4, IEC 62288 ed. 2, IEC 62388 ed. 2
For marine class approvals –see www.isic-systems.com
DuraMON55 specification
Resolution:
3840 x 2160
Active Area
1209.6mm x 680.4mm (55” diagonal)
Pixel Pitch:
0.315 mm x 0.315 mm
View angle:
89° (L/R/T/B) (typical)
Viewing distance:
1.10 m
Luminance:
450 cd/m2 (typical)
Contrast ratio:
4000:1 (typical)
Colors:
16.7 mill. (24-bit)
Response Time:
6.5 ms (GtG) (typical)
Protection:
IP65 front –IP20 rear
Weight:
75 kg
Dimensions (WxHxD):
1348,5 cm x 819,4 x 95 cm

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 9
8Mechanical outline DuraMON 55 GLASS
106,5
117 192,2
247,9
64,8
Lift and tilt buttons
Ø51,5 hole for connection cables
208,7
115,9
VESA 400
VESA 350
169,7
334
168
Ø29
50
70
4x M8x1.25 - 6H -17
234,7
1348,4
819,4
69,4 69,2
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Approved by
Projection method: Drawing size:
Units: mm
Designed by
General tolerances: 0,2
Hole position: 0,1
Angle, straightness and flatness: DS/ISO 2768-H
Scale: Drawing no.
Replaces:
Rev.
Subject:
ISIC A/S, Edwin Rahrs Vej 54, DK-8220 Brabrand. Tlf.: [phone]. Web: www.isic.dk
This docoment contains proprietary information and is not to be
used or reproduced without the written permission of ISIC A/S
Material: Surface:
Sheet: 1 of 1
ksc 25-09-2017
A3
Mechanical outline DuraMON WS Glass 55''
AC
NHL 25-09-2017
1:5 08207-000 B
ECO 2319
USB extern out
Audio in
Audio out
Touch USB VGA DP1
HDMI2
DVI
Power AC USB extern in
Lift and tilt control
M6 ground pin
DP2 HDMI1
Lift and tilt buttons
Menu buttons
RS232
Monitor 65kg

User Reference Manual –DuraMON GLASS series
PN: 08186-000 Rev B Page 10
9Mechanical outline Wall Mount
Countersunk Mounting holes for 4x bolt M10 ISO 4762
425
1
3x Cable anchor
Cable access
201
Ø51,5 hole for connection cables
350
40
Ø18
10,5
Ø11
Mounting holes 265
Mounting holes 400 49,9
156,4
(461,7)
(234,7)
Cable access 115
Cable access 35
112,5
A-A ( 1 : 2 )
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Approved by
Projection method: Drawing size:
Units: mm
Designed by
General tolerances: 0,2
Hole position: 0,1
Angle, straightness and flatness: DS/ISO 2768-H
Scale: Drawing no.
Replaces:
Rev.
Subject:
ISIC A/S, Edwin Rahrs Vej 54, DK-8220 Brabrand. Tlf.: [phone]. Web: www.isic.dk
This docoment contains proprietary information and is not to be
used or reproduced without the written permission of ISIC A/S
Material: Surface:
Sheet: 1 of 1
ksc 25-09-2017
A3
DuraMON Glass 55 Wall Mount outline
NHL 25-09-2017
1:5 08361-000 B
ECO 2319
A A
Parts List DESCRIPTION
REVPART NUMBER
QTY
ITEM DuraMON Glass 55 Wall Mount
A08360-00011 SCREW 6KT M8x30 DIN 933 A4
(ISO 4017)
00233-00142
SKIVE PLAN Ø8,4X16X1,6 RF
DIN125A A2
00238-00544
24