ISIC DuraMON 26 WS Assembly instructions

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 1
DuraMON-WS series
DuraMON 26 WS
DuraMON 26 WS SL
DuraMON 26 WS LED
DuraMON 27 WS ECDIS
User Reference Manual

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 2
Disclaimer
ISIC A/S makes no representation or warranties with respect to the contents or use of this manual,
and specifically disclaims any express or implied warranties of merchantability or fitness for any
particular purpose. Further, ISIC A/S reserves the right to revise this publication and to make
changes to its content at any time, without obligation to notify any person or entity of such revisions
or changes.
Image sticking: If the monitor is operated with static images (logo’s etc) it will inevitably lead to
images sticking on the display (like on old CRT’s). This is not a permanently situation and can be
removed by operating the monitor with a completely black screen.
FCC Warning
Computing devices and peripherals generate and radiate radio frequency energy, and if not
installed and used in accordance with the instructions advised by ISIC A/S, it may cause
interference to radio communication.
The DuraFLEX series, manufactured by ISIC A/S, is designed to comply with the emerging generic
EEC standards, that cover applications in maritime environment.
Classification
The monitor is classified as “protected from the weather” according to IEC 60945 ed.4 (former class
b).
Approvals
Approval according to IACS E10 ed. 5 and IEC 60945 ed. 4, Maritime navigation and radio
communication equipment and systems –General requirements.
ECDIS IEC 61174 ed. 3
Radar IEC 62288 ed. 1
Radar IEC 62388 ed. 1
ISIC A/S is complying with the WEEE directive within the European Union, stating that electronic and
electric products must be collected separately.
Products are marked according to the directive.
Copyright 2014 ISIC A/S
ISIC PN: 05435-000 rev. D
ISIC A/S
Edwin Rahrsvej 54
DK-8220 Brabrand
Denmark
Phone: [phone]
Fax: [phone]
Web: http://www.isic-systems.com

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 3
Table of Contents
1FEATURES...............................................................................................................................................................5
2GENERAL CONSIDERATIONS ON INSTALLATION AND OPERATION ..................................................6
3DURAMON WS CONNECTIONS .........................................................................................................................7
4DURAMON WS FRONT PANEL CONTROLS (ECDIS AND RADAR)...........................................................8
4.1 DURAMON WS FRONT FOIL: ..............................................................................................................................8
5POPUP MENU..........................................................................................................................................................9
6ADVANCED OSD .................................................................................................................................................11
6.1 INPUT SELECT ....................................................................................................................................................12
6.2 IMAGE ADJUSTMENTS........................................................................................................................................13
6.3 COLOR ADJUSTMENTS........................................................................................................................................15
6.4 ADV.COLOR SETTINGS .....................................................................................................................................16
6.5 SCALING ADJUSTMENTS ....................................................................................................................................17
6.6 OSD SETTINGS ..................................................................................................................................................18
6.7 SYSTEM SETTINGS .............................................................................................................................................20
6.8 SERIAL COMMUNICATION..................................................................................................................................22
6.9 VIDEO SETTINGS (OPTIONAL).............................................................................................................................23
7SERIAL CONNECTION PIN-OUT .....................................................................................................................25
8TECHNICAL SPECIFICATIONS DURAMON WS..........................................................................................26
9MECHANICAL OUTLINE DURAMON 26 WS.................................................................................................28
10 MECHANICAL OUTLINE DURAMON 26 WS SL.......................................................................................29
11 MECHANICAL OUTLINE DURAMON 26 WS LED ...................................................................................30
12 MECHANICAL OUTLINE DURAMON 27 WS ECDIS ...............................................................................31
13 MECHANICAL OUTLINE DURAMON26WS/SL/LED BRACKET STAND OPTION............................32
14 MECHANICAL OUTLINE DURAMON26WS/SL/LED BRACKET WALLMOUNT OPTION..............33
15 MECHANICAL OUTLINE DURAMON27 WS ECDIS BRACKET STAND OPTION.............................34
16 MECHANICAL OUTLINE DURAMON27 WS ECDIS BRACKET WALLMOUNT OPTION...............35
17 ECDIS MODE.....................................................................................................................................................36
18 DURA COMMUNICATION PROTOCOL .....................................................................................................36
19 COMPASS SAFE DISTANCE..........................................................................................................................36
20 POWER CONSUMPTION................................................................................................................................36

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 4
21 IN RUSH CURRENT.........................................................................................................................................37
22 TROUBLESHOOTING .....................................................................................................................................37
23 SERVICING THE UNIT ...................................................................................................................................37
24 TERMS, ACRONYMS AND ABBREVIATIONS...........................................................................................38
25 ISIC INFO / SUPPORT .....................................................................................................................................39
26 REVISION HISTORY .......................................................................................................................................40
27 APPENDIX A: PIXEL POLICY.......................................................................................................................41
28 APPENDIX B: LATEST FIRMWARE VERSIONS.......................................................................................44
29 APPENDIX C: DECLARATION OF CONFORMITY ..................................................................................45

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 5
1Features
Congratulations on your purchase of a DuraMON WS. This short form manual is designed to get you
started working with your new DuraMON WS.
The DuraMON WS series of monitors are all made as rugged monitors especially designed for the
demanding operating conditions at sea.
The DuraMON WS series are tested for full compliance to marine-standards IACS E10 and IEC 60945.
The monitor comes with excellent brightness and contrast levels that, together with wide viewing
angles, ensure a good readability thus making it very eye-friendly. For the best picture quality,
always use a double shielded cable with ferrites, like the one supplied with the monitor.
Direct dimming control (0-100%) from UP/DOWN buttons.
Full settings control via menu or serial link.
Picture in picture function, scalable on the screen.
Anti-glare coated glass.
IP65 protection and liquid resistant front.
Multiple connections to cover the widest range of signal sources:
DVI-D
RGB
S-Video (optional)
Composite (optional)
Firmware update via RS232

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 6
2General considerations on Installation and
Operation
The DuraMON WS is designed to work at conditions according to IEC 60945. However, keeping the
temperature and vibration level at a minimum will extend the life time of the product. ISIC
recommend operating this product at normal room temperature (20-25 °C), with the lowest level of
vibration and humidity.
Installation of the DuraMON WS
In order to obtain the best possible operating conditions, please note the following precautions.
-Room for cooling.
When designing the cabinet/console for the DuraMON WS, please ensure that air can
flow freely around the cabinet, in order to avoid any unnecessary rise in temperature. If
it is not possible to have an adequate natural airflow, use a fan to force the airflow to
be higher.
-Mounting positions
To obtain adequate cooling by convection ISIC recommends that the DuraMON WS is
mounted at least 30 degrees from horizontal. If this is not possible, forced cooling must
be applied directly to the unit in order not to overheat it.
-Sunlight
If the unit can be exposed to direct sunlight, there is a potential risk that the unit can be
overheated. Please take measures to prevent direct sunlight. Do also consider forced
cooling on the back of the unit.
Operation of the DuraMON WS
To ensure that colors and luminance on the display is correct in ECDIS applications, do not use the
monitor until the warm-up period has completed.
The warm-up period is as follows:
Day mode
Dusk mode
Night mode
DuraMON 26 WS
3 hours
1 hour and 45 min
2 hours
DuraMON 26 WS SL
3 hours
1 hour and 45 min
2 hours
DuraMON 26 WS LED
40 min
40 min
40 min
DuraMON 27 WS ECDIS
1 hour
1 hour
1 hour

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 7
3DuraMON WS connections
Below is a view of optional connections to the monitor. The default inputs are: power, RS-232,
DVI and VGA.
Remote Control - RS232
VGA
Power ac
DVI-D
Composite video
S-Video

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 8
4DuraMON WS front panel controls (ECDIS
and Radar)
The front panel is illuminated and will be dimmed continuously depending on changing of
backlight brightness.
4.1 DuraMON WS front foil:
ON/OFF:
This key is used to turn the product on or off. Pressing it will turn the power on, while holding it
pressed will turn the power off. The light in the button will change from blue to red to indicate it’s
powered down. It is important to notice that, when powered off, the product still consumes some
power from the mains. To cut off the power from the product it is necessary to unplug its power
cord from the mains.
If there is no active signal, the monitor will go to suspend mode until an active signal is detected.
While the monitor is in suspend mode, the blue light will blink in the ON/OFF button.
MENU:
Pressing this key the Popup menu will appear. See Popup Menu section for details.
UP/DOWN:
Used to adjust backlight or to navigate and adjust settings in menus. Pressing UP and DOWN
together will restore the backlight level to the last selected ECDIS mode by the serial link. (See
document 04924-000 for protocol details).
ENTER:
This key is used to confirm and to enter the advanced OSD by pressing ENTER and thereafter MENU
while holding ENTER pressed.
ON/OFF
MENU
UP
DOWN
ENTER

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 9
5Popup Menu
Press “MENU”button once, and the Popup Menu will appear. While the Popup Menu is active, no
settings sent over the serial link will be executed.
Press once on the
“MENU” key
Backlight
80
It is now possible to
adjust the backlight
level by pressing
either up- or down
key.
Press twice on the
“MENU” key
Press ENTER to select default values
Press MENU to exit
It is now possible to
default backlight,
brightness and
contrast by pressing
the ENTER key.
For ECDIS calibrated
displays, the
backlight level will
be set to the last
selected ECDIS
mode by the serial
link. (See 04924-000
document for
details on how to
change ECDIS
mode over the serial
link).
NOTE: See
advanced OSD
chapter for default
values.
Press three times on
the “MENU” key
Leaving Popup
Menu.
If color control in the advanced menu is set to user mode the Popup Menu will include Brightness
and Contrast adjustments.
Press once on the
“MENU”key
Backlight
80
It is now possible to
adjust the backlight
level by pressing
either up- or down
key.
Press twice on the
“MENU”key
Brightness
50
It is now possible to
adjust the brightness
level by pressing
either the up- or
down key.

User Reference Manual –DuraMON-WS series
PN: 05435-000 Rev D Page 10
Press three times on
the “MENU”key
Contrast
50
It is now possible to
adjust the contrast
level by pressing
either the up- or
down key.
Press four times on
the “MENU”key
Press ENTER to select default values
Press MENU to exit
It is now possible to
default backlight,
brightness and
contrast by pressing
the ENTER key.
For ECDIS calibrated
displays, the
backlight level will
be set to the last
selected ECDIS
mode by the serial
link. (See 04924-000
document for
details on how to
change ECDIS
mode over the serial
link).
NOTE: See
advanced OSD
chapter for default
values.
Press five times on
the “MENU”key
Leaving Popup
Menu.