ISIC DuraMON15 Assembly instructions

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 1
DuraMON
DuraMON15
DuraMON19
DuraMON22
DuraMON24
DuraMON26
DuraMON27
User Reference Manual

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 2
Disclaimer
ISIC A/S makes no representation or warranties with respect to the contents or use of this manual,
and specifically disclaims any express or implied warranties of merchantability or fitness for any
particular purpose. Further, ISIC A/S reserves the right to revise this publication and to make
changes to its content at any time, without obligation to notify any person or entity of such revisions
or changes.
Image sticking: If the monitor is operated with static images (logo’s etc.) it will inevitably lead to
images sticking on the display. This is not a permanently situation and can be removed by
operating the monitor with a video that is created for this purpose.
FCC Warning
Computing devices and peripherals generate and radiate radio frequency energy, and if not
installed and used in accordance with the instructions advised by ISIC A/S, it may cause
interference to radio communication.
The DuraMON series, manufactured by ISIC A/S, is designed to comply with the emerging generic
EEC standards, that cover applications in maritime environment.
Classification
The monitor is classified as “protected from the weather” according to IEC 60945 ed.4 (former class
b).
Approvals
Approval according to IACS E10 ed. 6 and IEC 60945 ed. 4, Maritime navigation and radio
communication equipment and systems –General requirements.
ECDIS IEC 61174 ed. 4 (Not available on 15” & 22”)
Radar IEC 62288 ed. 2
Radar IEC 62388 ed. 2
ISIC A/S is complying with the WEEE directive within the European Union, stating that electronic and
electric products must be collected separately.
Products are marked according to the directive.
Copyright 2016 ISIC A/S
ISIC PN: 05192-075
ISIC A/S
Edwin Rahrs Vej 54
DK-8220 Brabrand
Denmark
Phone: [phone]
Fax: [phone]
Web: http://www.isic-systems.com

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 3
Table of Contents
FEATURES ............................................................................................................................................................... 41
GENERAL CONSIDERATIONS ON INSTALLATION AND OPERATION .................................................. 52
DURAMON CONNECTIONS ................................................................................................................................ 63
DURAMON FRONT PANEL CONTROLS .......................................................................................................... 84
POPUP MENU.......................................................................................................................................................... 95
ADVANCED OSD .................................................................................................................................................... 96
6.1 INPUT SELECT .................................................................................................................................................... 10
6.2 VGA ADJUSTMENTS.......................................................................................................................................... 10
6.3 COLOR ADJUSTMENTS (NOT AVAILABLE IN ECDIS MODE) ................................................................................ 12
6.4 ADVANCED COLOR (NOT AVAILABLE IN ECDIS MODE) .................................................................................... 13
6.5 OSD SETTINGS .................................................................................................................................................. 14
6.6 SYSTEM SETTINGS ............................................................................................................................................. 15
SERIAL CONNECTION PIN-OUT ..................................................................................................................... 167
TECHNICAL SPECIFICATIONS DURAMON ................................................................................................. 168
8.1 SPECIFICATION DURAMON 15” ........................................................................................................................ 17
8.2 SPECIFICATION DURAMON 19” ........................................................................................................................ 17
8.3 SPECIFICATION DURAMON 22” ........................................................................................................................ 17
8.4 SPECIFICATION DURAMON 24” ........................................................................................................................ 18
8.5 SPECIFICATION DURAMON 26” ........................................................................................................................ 18
8.6 SPECIFICATION DURAMON 27” ........................................................................................................................ 18
MECHANICAL OUTLINE DURAMON 15”...................................................................................................... 199
MECHANICAL OUTLINE DURAMON 19”.................................................................................................. 2010
MECHANICAL OUTLINE DURAMON 22”.................................................................................................. 2111
MECHANICAL OUTLINE DURAMON 24”.................................................................................................. 2212
MECHANICAL OUTLINE DURAMON 26”.................................................................................................. 2313
MECHANICAL OUTLINE DURAMON 27”.................................................................................................. 2414
TOUCH SCREEN OPTION (19” ONLY)........................................................................................................ 2515
ECDIS MODE..................................................................................................................................................... 2716
DURA SERIAL COMMUNICATION PROTOCOL...................................................................................... 2717
COMPASS SAFE DISTANCE .......................................................................................................................... 2718
POWER CONSUMPTION ................................................................................................................................ 2819
INRUSH CURRENT .......................................................................................................................................... 2820
TROUBLESHOOTING ..................................................................................................................................... 2921
SERVICING THE UNIT ................................................................................................................................... 2922
TERMS, ACRONYMS AND ABBREVIATIONS........................................................................................... 2923
ISIC INFO / SUPPORT ..................................................................................................................................... 3024
REVISION HISTORY ....................................................................................................................................... 3125
APPENDIX A: PIXEL POLICY ....................................................................................................................... 3226

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 4
Features1
Congratulations on your purchase of a DuraMON. This short form manual is designed to get you
started working with your new DuraMON.
The DuraMON series of monitors are all made as rugged monitors especially designed for the
demanding operating conditions at sea.
The DuraMON series are tested for full compliance to marine-standards IACS E10 and IEC 60945.
The monitor comes with excellent brightness and contrast levels that, together with wide viewing
angles, ensure a good readability thus making it very eye-friendly. For the best picture quality,
always use a double shielded cable with ferrites, like the one supplied with the monitor.
Direct dimming control (0-100%) from UP/DOWN buttons (except ECDIS models).
Full settings control via menu or serial link.
Support for DDC
Anti-Reflective coated glass.
IP65 protected front.
Multiple connections to cover the widest range of signal sources:
Display Port / HDMI
DVI-D
VGA
Resistant to most chemicals
Optional Touch Screen available, but has to be ordered with the monitor (not part of the IEC 60945
approval).

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 5
General considerations on Installation and2
Operation
The DuraMON is designed to work at conditions according to IEC 60945. However, keeping the
temperature and vibration level at a minimum will extend the life time of the product. ISIC
recommend operating this product at normal room temperature (20-25 °C), with the lowest level of
vibration and humidity.
Installation of the DuraMON
In order to obtain the best possible operating conditions, please note the following precautions.
-Room for cooling.
When designing the cabinet/console for the DuraMON, please ensure that air can flow
freely around the cabinet, in order to avoid any unnecessary rise in temperature. If it is
not possible to have an adequate natural airflow, use a fan to force the airflow to be
higher.
-Mounting positions
To obtain adequate cooling by convection ISIC recommends that the DuraMON is
mounted at least 30 degrees from horizontal. If this is not possible, forced cooling must
be applied directly to the unit in order not to overheat it.
-Sunlight
If the unit can be exposed to direct sunlight, there is a potential risk that the unit can be
overheated. Please take measures to prevent direct sunlight. Do also consider forced
cooling on the back of the unit.
Operation of the DuraMON
To ensure that colors and luminance on the display are correct in ECDIS applications, do not use
the monitor until the warm-up period has completed.
The warm-up period is as follows:
Day mode
Dusk mode
Night mode
DuraMON19
30 min
30 min
30 min
DuraMON24
30 min
30 min
30 min
DuraMON26
30 min
30 min
30 min
DuraMON27
30 min
30 min
30 min

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 6
DuraMON connections3
Below is a view of optional connections to the monitor. The default inputs are: power, RS-232,
DP/HDMI, DVI and VGA.
15”:
AC Power DC Power RS-422/485 RS-232 DP or HDMI DVI VGA
19”:
AC Power DC Power RS-422/485 RS-232 DP or HDMI DVI VGA
22”:
AC Power DC Power RS-422/485 RS-232 DP or HDMI DVI VGA

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 7
24”:
AC Power RS-422/485 RS-232 DP or HDMI DVI VGA
26”:
AC Power RS-422/485 RS-232 DP or HDMI DVI VGA
27”:
AC Power RS-422/485 RS-232 DP or HDMI DVI VGA
To connect the DC power connector you need a screw driver
Only use multicore cables from AWG16 to AWG12 (1.0 mm2to 4 mm2)
DC connector: Weidmüller, BLZP 5.08HC/02/180F SN BK BX, 1944330000
AC Connector: IEC 60320 type C13
DC Power

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 8
DuraMON front panel controls4
The front panel is illuminated and will follow the brightness level of the monitor backlight.
On/Off LED Menu Down Up Enter
ON/OFF:
This key is used to turn the product on or off. Pressing it will turn the power on, while holding it
pressed for 5 seconds will turn the power off. The light in the button will change from Green to red
to indicate it’s powered down. It is important to notice that, when powered off, the product still
consumes some power from the mains. To cut off the power from the product it is necessary to
unplug its power cord from the mains.
If there is no active signal, the monitor will go to suspend mode until an active signal is detected.
Non ECDIS calibrated monitors:
Monitors: The LED will illuminate Green when the monitor is powered on and red when the monitor is
powered down. The LED will be red if no active signal is found.
ECDIS calibrated monitors:
The LED will ONLY illuminate orange when the backlight level is at calibrated setting AND ONLY on
a calibrated port. If the backlight level isn’t at calibrated setting OR an uncalibrated port is used
the LED will illuminate green.
Menu:
To activate the OSD menu, press “Menu” and “Enter” buttons at the same time.
See Popup Menu section for details.
UP/DOWN:
Used to adjust backlight or to navigate and adjust settings in menus. Pressing UP and DOWN
together will restore the backlight level to the last selected ECDIS mode by the serial link. (See
document 04924-001 for protocol details).
ENTER:
This key is used to confirm and to enter the advanced OSD by pressing ENTER and thereafter MENU
while holding ENTER pressed.

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 9
Popup Menu5
Without entering the OSD menu it is possible to adjust brightness by pressing “up” or “down” key.
Press “up” or
“down”
It is now possible to
adjust the backlight
level by pressing
either up- or down
key.
Advanced OSD6
With the Advanced OSD (On Screen Display) you can modify the settings and control the special
features of the DuraMON as described on the next pages.
To enter the Advanced OSD, press both the “ENTER” and the “MENU” button at the same time.
To navigate the Advanced OSD use the “UP” and “DOWN” buttons and press “ENTER” to select a
specific setting. To get back to the previous menu point, press the “MENU” button.
Backlight
80

User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 10
6.1 Input select
Input Select –Main Picture Channel
Main Menu
Input Select
VGA Adjustments
Color Adjustments
Advanced Color
Custom info
OSD Settings
System Settings
Input Select
Main Picture Channel
Main Picture Channel
VGA
DVI
DP
The Main Picture Channel
can be selected between all
available inputs (VGA,
Display Port and DVI.
6.2 VGA Adjustments
Image Adjustments –Auto Adjust
Image Adjustments –Clock
Main Menu
Input Select
VGA Adjustments
Color Adjustments
Advanced Color
Custom info
OSD Settings
System Settings
VGA Adjustments
Auto Adjust
Clock
Phase
Hor. Position
Ver. Position
Auto Adjust
Auto Adjust
Selecting auto adjust will
force the system to adjust
the image (clock, phase,
bandwidth and position)
Main Menu
Input Select
VGA Adjustments
Color Adjustments
Advanced Color
Custom info
OSD Settings
System Settings
VGA Adjustments
Auto Adjust
Clock
Phase
Hor. Position
Ver. Position
Clock
MIN MAX
Value
The pixel clock for VGA
can be selected here.
Image Adjustments –Phase
Image Adjustments –Hor. Position