IsoAcoustics ISO Series User manual

Series Stands
forAudio Speakers
and Studio Monitors
-------~
c
~~
)
~

Congratulations on your purchase of the Installation
Guide award-winning lsoAcoustics ISO-Series
series
of speaker stands for audio speakers and
studio monitors. You're well on yourway to getting
superior, authentic and accurate sound.
We've incorporated PIF principles in acoustics to
deliverthis unique, patented "floating" architecture:
Placement/Proximity- reduces reflections by raising the speakers or monitors
offthe supporting surfaces and away from adjacent surfaces.
Isolation -reduces vibrational energy from exciting other objects through
decoupling the speakers
or monitors from the supporting surface; speakers and
enclosures float independently.
Focus- creates the ideal listening position; raising and
tilting speakers and monitors to form an equilateral triangle
from the speakers to the listener. The more directional
frequencies emitted by the tweeters can be tilted to the level
of the listener's ear, greatly improving the stereo soundstage.
<> --------- 0
' '
' '
nr:1n
u ~ u
The ISO·Series stands have isolators that feature a unique bi-directional design
that responds to the energy in audio speakers and studio monitors while resisting
lateral motion.
For optimum performance the stand should be rotated to be aligned
in the same
direction as the speaker cabinet, and with the cabinet resting directly on upper
isolators.
Each kit contains the following items (sufficient for two speakers):
x2
x4=
+
~ x4=

c: ~ ~ ~--------
1. Select either the long or short tubes to get the appropriate height for the
speaker to achieve optimal audio performance.
2. Fit the inserts in either the front tubes to tilt the speaker upwards or in the back
tubes for a downward tilt, if necessary. Some examples are illustrated below:
(a)8
3. Inserts are always installed as an identical pair- both at the back for a forward
tilt (a), or both
in the front for a backward tilt (b).
4. Complete step 3 before firmly pressing the tubes into the isolators.
5. Complete assembly by firmly pressing the top and bottom isolators in place.
6. Check that the speaker is securely in place and will not slip or fall offthe
assembly.
7. Check that the surrounding surface will support the full weight of the speaker
plus the stand.
Assembly instruction video
can be found at:
www.isoacoustics.com/iso-18r-series-isolation-stands-instruction-video/
lsoAcoustics warrants the ISO·Series products against evident
defects
in material and workmanship for a period of two years
from the date
of original purchase. This warranty does not cover
mechanical damage resulting from misuse or abuse, lack of
reasonable care, damage due to force majeure or natural forces.
lsoAcoustics shall not be liable for any special, indirect,
di rect or
consequential damages to other products or property.

lsoAcoustics
Inc~
4981
HWY?
Ea~t
.
,
Unit.12A, Suite 160
Markham
....
QN, Canada L3R
1N1
www.isoacoustics.com