Isotek EVO3 Super Titan User manual

Super Titan Instruction Manual
Multi award winning power management systems
January 2011

January 2011 Contents
The company A.1
The principles A.1
The execution A.1
Overview B.2
Features B.2
Safety B.3
Placement C.4
Equipment coupling C.4
System integration C.4
Fault finding D.5
Dimensions & sockets E.6
G.9
A. Intr ducti n
B. The pr duct
C. Installati n
D. Tr ublesh ting
E. Specificati ns
G. Warranty
General section

January 2011 A. Introduction
IsoTek was formed in July 2001 with the vision to create high quality
mains power distribution units that moved beyond current
conventions. Through careful market analysis and extensive research
we were able to launch products that moved power distribution
forward to be recognised as an integral part of any audio or home
theatre system. Our products continue to lead the way in power
management systems, our latest EVO3 range galvanises our
commitment to pursue excellence at every level.
We believe all products benefit from their own clean power supply,
therefore we advocated the concept of using (smaller) individual filters
on each component, with these being specifically designed for their
purpose, this dramatically reduces and stops component cross
contamination and dispels the belief that one size fits all. Every single
component used in our designs is extensively tested for quality,
reliability and purpose. Our circuit designs are extensively ‘field’ tested
before coming to market so we can guarantee the widest compatibility
with third party products.
Within the market of premium audio it is vital to offer exceptional
performance and value for money. Products must be made to the
highest of standards, be reliable and attractive. A manufacturer must
offer exceptional service, dealer training, support and undertake the
very best in promotion design and literature. If all these elements are in
place customers should experience excellence at every stage. Our
continual quest is to meet these challenges.
All of our products are professionally designed in England with deep
consideration given to both style, functionality, performance and value
for money. Our European manufacturing facility offers a multi-award
winning hand built product line.
The c mpany
The principles
The executi n
The company

January 2011 B. The product
Thank you for purchasing the IsoTek Super Titan.
The Super Titan continues our multi award winning range and offers an
unpresidented level of performance specifically for high current
devices such as power amplifiers. It has been designed to offer an
uncompromised level of power delivery close to 10,000 Watts with a
transient ability over of 35,000 Watts. Super Titan is the ultimate high-
end high power conditioner on the market.
At the rear of the unit you will note four high quality silver plated
locking eutrik powercons rated at 32 Amps. These four outlets are
individually isolated to stop cross contamination and any component
cross talk. They are in no way connected to each other. Thus each
connected component has a clean supply.
Supplied with the Super Titan are two high current 32 Amp cables, one
to power the unit the second to connect a component. Additional
power cords can be purchased as needed.
Super Titan features 135,000 Amps of instantanious protection, this is
extremely important in today’s society where dangerous power surges
can damage sensitive audio equipment.
All fusing is external and in the form of a 32 Amp RCBO. This
eliminates any need to enter the product. There is a second RCBO and
power inlet and eutrik Powercon output to power any addition
conditioners.
All components are of the highest grade and are under stressed, this
gives greater longevity. inty percent of internal components used
within Super Titan are specifically designed for purpose, thus
guaranteeing the highest performance and specification.
Overview
Features
Front elevation of the unit
s u p e r t ita n
Official product name badge & EVO3 logo
LED indicator lights

January 2011 B. The product
Super Titan has its own dedicated built in isolation system so it is not
neccessary to place it into or onto an audio rack system. However you
should insure that Super Titan is placed in a location which allows
sufficient ventilation for the internal electronics. Ventilation should not
be impeded by covering the ventilation openings with items such as
newspapers, table-cloths, curtains etc. o naked flame sources, such
as lighted candles should be placed on the unit.
Other items may be placed on top of the Super Titan but only with an
additional isolation platform, this is available to purchase separately.
Do not place the unit near heat sources, such as radiators or air ducts.
The unit should not be placed in areas which could exceed 25
degrees, for example near vacumn tube amplifiers. Good air circulation
is essential to prevent heat build up within the chassis. Do not place
the Super Titan on an extremely soft surface, which could block the
ventilation intakes on the underside of the unit.
Do not let any liquids spill onto or objects fall into the chassis.
The apparatus must n t be exp sed t dripping r splashing and
n bjects filled with liquids, such as vases sh uld be placed n
t p.
Should either of these events happen immediately switch off the unit at
the wall socket, wait for at least one minute, unplug all other cables
and return it to your authorised IsoTek dealer for a full service.
Safety
Weight loading
20Kg
!
s u p e r t ita n

January 2011 C. Installation
Once the Super Titan is positioned, connect the unit to a mains wall
socket. You will notice two very high quality 32Amp power cords are
provided. The cable with the black locking eutrik Powercon is the
input cable. The cable with the light grey eutrik Powercon is the
output cable. It is important not to get these two connectors confused.
DO OT TRY TO CO ECT THE I PUT CABLE TO THE OUTPUT
SOCKETS
Should you wish to connect more than one piece of equipment to
Super Titan additional 32 Amp cables can be supplied. Please also
note that we do not recommend re-terminating existing cables you
have with the eutrik 32 Amp connectors unless these cables are
rated at 32 Amps.
The apparatus must be c nnected t an earthed mains
s cket- utlet.
Turn off all equipment you wish to power from the Super Titan. Unplug
the power cable(s) relating to these, connect the supplied 32A power
cable into the Super Titan. Please remember grey is for the output.
Plug the grey connector into the grey output socket at the back of the
Super Titan, this will rotate and lock. ow connect the IEC connector
into the back of your power amplifier or other high power device.
Connect the 32A input power cord (black eutrik connector), again this
will rotate and lock. ow connect the Super Titan to the wall outlet.
Turning the RCBO rated at 32A on the left hand side of the back
pannel will power the unit.
We recommend if you have the opportunity, to run a 32A feed for the
Super Titan. However the unit will function perfectly well from a
standard wall socket.
Equipment
c upling
System integrati n
Rear elevation of the unit
4 high quality silver plated 32A outputs
32A RCBO Power switch 20A RCBO Auxiliary
power switch
Main: 7360VA at 230V (3680VA at 115V)
Aux: 4600VA at 230V (2300VA at 115V)
Combined: 11,960VA at 230V (5980VA at 115V)
Transient power 5x rated power for 5mS
Total: 32A 3520 - 7360VA
Super Titan Power In: Super Titan Power Output:
100 - 240V ~ 32A
50/60Hz
100 - 240V ~ 20A
50/60Hz
Super Titan Auxiliary Power In:
The Combined MAX current (4 outlets) should not exceed 32A
Use this inlet to power
the Super Titan.
Use the power cord with
the black, colour coded
silver plated 32A locking
Neutrik PowerCon.
Use this inlet to power
additinal equipment which
are not part of our passive
power conditioning
range.
Designed by IsoTek® in England
www.isoteksystems.com ©2010 Audio Power Systems GmbH all rights reserved
32A Power In Auxiliary 32A Power In
16A Auxiliary output

January 2011 D. Troubleshooting
The front panel LEDs are not lit and the unit gives no power.
Check that the 32Amp RCBO on the left hand side of the back
panel is turned on. Check that the 32Amp power cable is correctly
connected to the left hand power input socket.
Check that the mains cable is securely plugged into the wall
socket.
On rare occasions the fuse at the main distribution fuse box may
also need to be checked.
We would strongly recommend a simple check of mains polarity. Your
local IsoTek authorised dealer will be able to supply a product through
us to help you establish this. Mains polarity is of particular importance
in markets where European Shuko plugs are used.
Always replace fuses with the same fuse type and rating.
Please contact us by email [email protected] if you are in
any doubt about the correct fusing.
Fault finding
Fuse location & Power switch
Fuse in UK three pin plug
32A RCBO: Power Input

Main: 7360VA at 230V (3680VA at 115V)
Aux: 4600VA at 230V (2300VA at 115V)
Combined: 11,960VA at 230V (5980VA at 115V)
Transient power 5x rated power for 5mS
Total: 32A 3520 - 7360VA
Super Titan Power In: Super Titan Power Output:
100 - 240V ~ 32A
50/60Hz
100 - 240V ~ 20A
50/60Hz
Super Titan Auxiliary Power In:
The Combined MAX current (4 outlets) should not exceed 32A
Use this inlet to power
the Super Titan.
Use the power cord with
the black, colour coded
silver plated 32A locking
Neutrik PowerCon.
Use this inlet to power
additinal equipment which
are not part of our passive
power conditioning
range.
Designed by IsoTek® in England
www.isoteksystems.com ©2010 Audio Power Systems GmbH all rights reserved
s u p e r t ita n
January 2011 E. Specifications
The following information relates only to the IsoTek Super Titan.
umber of outlets: 4
Type of outlets: 32A Silver plated eutrik unswitched
Mains inlet: 32Amp eutrik
Mains voltage: 100 - 240V
High current outlets (4): 32Amps
Maximum current: 32Amps continuous
Total available power (230V): 7360W
Transient Power: 35,500W
Dimensions: 500mm x 500mm x 300mm (WxDxH)
Weight: 27.0Kg
Please note, the information given in this document is correct at the
time of print. Small production changes in the course of improvement
through our ongoing research and development policy may arise. If
clarification of any point is required please refer to your local
authorised IsoTek dealer or visit www.isoteksystems.com where you
can download the very latest information.
Dimensi ns
& s ckets
Front & rear elevation

January 2011 G. Warranty
Please complete & send
As part of our on-going commitment to the highest standards of customer service, IsoTek offers
you the opportunity to extend the standard 2 year product warranty to 3 years, free of charge.
Simply visit:
www.is teksystems.c m/register
And follow the on screen instructions. This service will automatically update your details and
give confirmation of your registration via email within 24 hours.
IsoTek will not share your personal details with any third parties without your permission.
If you do not have internet access then please forward a copy of your invoice, together with the
product serial number and your address to our UK office:
IsoTek Systems,
4 Mozzetta,
Kings Head Yard,
Winchester,
SO23 9H
England.