IST Proline Dolphin Tech User manual

TECHNICAL DIVING COMPONENT
BACK PLATE POUCH & FITTING HARDWARE (Item no.: HB-4)
Printed in Taiwan Ver. E991007H
THANK YOU for choosing Dolphin Tech technical diving BCD component. Only
materials best suited to diving conditions were used to make this vital piece of
equipment and it was designed and made according to the highest standard in diving
equipment manufacturing so you can have reliable service from it for years to come.
GENERAL WARNINGS AND CAUTIONS
Please read and thoroughly understand the content of this owner’s manual in its entirety. If there is
anything not clear on how this product functions, for your safety sake, do not use it and please contact
an authorised IST dealer for assistance.
Do not modify any component on this product as it will render the warranty void and it may not
function properly and safely.
PRODUCT DESCRIPTION AND ASSEMBLY METHOD
The back plate pouch is to be attached to the back plate and is used to store utility lifting device(s) such
as a safety sausage. The additional gear can be snugly sandwiched between your back and the back
plate so it is out of the way with no additional underwater drag created. A quick snap can secure the
content to the crotch strap’s tail D-ring to prevent accidental loss of equipment (right).
2

1) There are 8 grommets on
the pouch and it comes with
8 sets of fitting hardware
consist of screws, nuts and
washers. They are to be
fitted to the plate where as
indicated.
2) Use the hardware to secure the pouch to the back plate as shown. You will need a Philips
screwdriver for the job.
Pic. 1. Pic. 2.
Assembly tip: If access to the tank attaching hardware is needed, remove only the top 2 and bottom 2 screw
sets.
MAINTENANCE AND STORAGE
-Do not put or drag this BCD component across rough and / or sharp surfaces.
-Do not place any sharp and / or heavy object on any part of this component.
-Do not expose this BCD component to the sun while not diving.
-Immediately after a dive, rinse this component with fresh water as soon as possible. Air dry (in the
shade) completely before putting your BCD and back plate pouch away.
-Store in a cool, shaded place.
3
WARRANTY
The use of non-factory parts or any modification may
irreparably damage this BCD component and its parts
which will render the warranty void and can lead to
unsafe diving.
The warranty of this technical BCD component is valid to the original owner only (with proof of
purchase) AND it covers any defects in materials and / or workmanship for the period of 2 years from
the date of purchase. Proper maintenance as prescribed in this manual is required to uphold the
warranty during the valid coverage. Any wear and tear under normal usage, as well as any
commercial / rental usage, are not covered by this warranty. The following action will also void the
warranty: any incorrect use or misuse – intentional or unintentional or any modification of this BCD
part.
If a problem has developed with this product, please contact your nearest IST authorised dealer or
IST distributor for return authorisation. Please properly package this product and send with your
proof of purchase and postage prepaid. We reserve the right to service any non-authorised returns.
PURCHASE RECORD
Date of purchase (dd) / (mm) / (yy)
Dealership &
contact information
(Dealer’s stamp)
Purchaser & contact info:
http://www.istsports.com
E-mail:[e-mail]