WOS Series WOS Series Installation Guide Installation Guide
COMPONENTS
Installation Guide
A.
E.
B.
F.
C.
G.
D.
H.
4x horizontal bars
(long)
4x castors
4x horizontal bars
(short)
36x assembly
screws
4x horizontal bars
(long)
16x casstor screws
2x internal
mounting posts
Mounting screws &
cage nuts
STEP. 1
Joint long horizontal bars (A) and short
horizontal bars (C) together.
STEP. 3
Install the 4x vertical mounting posts (B)
onto one of the frames.
STEP. 5
Join the other frame onto the structure.
STEP. 4
After step 3 is done, you will have a
structure like the image above.
STEP. 6
After step 5 is done, you will have a
complete structure.
STEP. 7
Install the 2x internal mounting posts
(D) onto the unit.
STEP. 9
Install the 4x castor (E) with 16x screws. (F)
STEP. 10
Finished open frame rack.
STEP. 8
Internal mounting posts can be installed
onto the desired location to t shorter
chassis.
STEP. 2
After step 1 is done, you will have a
structure like the image above.
