iStarUSA Claytek WS Series User manual

The newest innovation in
audio visual data storage
Claytek - Powered by iStarUSA Group Tel: [phone] Fax: [phone] www.istarusa.comTel: 1-888-989-1189 Fax: [phone] www.istarusa.com
How to adjust
mounting rails:
STEP 3:
STEP 1:
Unscrew four screws to
loosen the vertical post
(repeat for all four posts)
STEP 2:
Relocate the M5 cage
nuts. Snap the cage
nut from outside of the
chassis to the horizontal
post where you desire.
Repeat step 2 for all 8
corners.
M5 cage nut
STEP 4:
Flip and align the vertical post
from step 1 behind the
M5 cage nut then screws
tight to secure the vertical
post(repeat for all four
posts)
DETAIL: A
DETAIL: B
DETAIL: D
DETAIL: C
MAX: 574
MIN: 250
25

Tel: [phone] Fax: [phone] www.istarusa.comTel: 1-888-989-1189 Fax: [phone] www.istarusa.com
How to open side panel: How to close side panel:
STEP 1: STEP 1:
nd the side with 4 screws secured the
mounting posts. Unscrew two screws
in the middle to release the side panel
Align the side panel to
the side of the chassis
then swing back to close
STEP 2: STEP 2:
Swing out the side panel
from the front and pull
forward to completely
remove it.
Screw two screws
to secure the side
panel in place
DETAIL: A
DETAIL: A
DETAIL: B