ITC Audio T-6225 User manual

Please follow the instructions in this manual to obtain the optimum resultsfrom this unit.
We also recommend that you keep this manual handyfor future reference.
ALARM MATRIX
OPERATION MANUAL
AUDIOAUDIO
PUBLIC ADDRESS SYSTEM
T-6225
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
12345678910
POWER
T-6225
ALARM MATRIX
ON
OFF
1234
RESET
ADJACENT ZONE ALARM ZONES

TABLE OFCONTENTS
2
T-6225
1. SAFETYPRECAUTIONS .......................................................................................3
2. GENERALDESCRIPTION ....................................................................................5
3. FEATURES ...............................................................................................................5
4. NOMENCLATUREAND FUNCTIONS
4.1 Front Panel............................................................................................................. 6
4.2 RearPanel..............................................................................................................7
5.
.5.1 User Operation....................................................................................................... 8
5.2 Address Tag Setup..................................................................................................8
6. APPLICATIONS .......................................................................................................9
7.SPECIFICATIONS .................................................................................................. 10
8.DIMENSIONAL DIAGRAM ....................................................................................11
OPERATION
V1.0-2008-09-17

Be sure to read the instructions in this sectioncarefully before use.
Make sure to observe the instructions inthis manual as the conventions of safety symbols andmessages
regarded as very important precautions are included.
We also recommend you keep this instructionmanual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer.
ITC
ITC
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
3
1. SAFETY PRECAUTIONS
T-6225

An all-pole mainsswitch with acontact separation ofat least 3mm in eachpole shall beincorporated in
the electrical installationof the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so maycause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your dealer as to the cleaning. If dust
is allowed toaccumulate in the unit over a long
periodof time,a fire or damage to the unit may
result.
ITC
Ifdustaccumulates onthepower supply plugorin
the wall AC outlet, a fire may result. Clean it
periodically.Inaddition, inserttheplug inthewall
outletsecurely.
Switchoff the power, andunplug thepower supply
plug from the ACoutlet for safety purposes when
cleaning or leaving theunit unused for 10 days or
more.Doingotherwise may causea fire or electric
shock.
1. SAFETY PRECAUTIONS
4
T-6225

5
3. FEATURES
2. GENERAL DESCRIPTION
=Emergency signal warning function.
=Warning trigger player automation.
=Have 30 road division warning.
=Bus switching power control, expand to120.
The T-6225 is a public address alarm matrix with can provide an ideal public address solution from small
to big places such us mosques, schools, hotels and factories to train stadium and air stations.
T-6225

6
1. POWER
Power indicator
2. POWER SWITCH
On top of the opening Power
Press the end, power shut down
3. ADJADENT ZONE
Escape indicator
4. NOMENCLATUREAND FUNCTIONS
2
4. RESET
Rest switch
5. ALARE ZONES
1~30 filed warning indicator
1
4.1 FRONT PANEL
5
3
POWER
T-6225
ALARM MATRIX
ON
OFF
1234
RESET
ADJACENT ZONE
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
12345678910
ALARM ZONES
4
T-6225

NOMENCLATURE ANDFUCTIONS
7
10.ADDRESS TAG
Address choose
11.COM
Com communicate point
12.IN 1~30
1-30 field warning singal input
13.~220V+/50Hz AC POWER INPUT
4.2 REAR PANEL
12 13 10 11
ADDRESSTAG COM
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
IN 1-15
IN 16-30
~220V 50Hz
T1AL250V
~220V 50Hz
T1AL250V
T-6225

8
5.1 USER OPERATING
5.OPERATION
5.2 ADDRESS TAG SETUP
Alarm input"ALARM IN"of 11-25 for communal ground
wrid. 1-10 terminal parting correspond supervise Ch1~
CH10 pass,any pass warning homlogy pass auto send
alrm singal to emergency natrix divider T-6225 trigger
homlogy alarm field.
ON
OFF
-N +N
-1
-2
-3
-4
+1
+2
+3
+4
1-30
31-60
61-90
91-120
Address
Empty(not take)
Notice no otherthan whenthis mainframeswitch
come within"ON" time,this mainframe
rest switchof use
T-6225

6. APPLICATIONS
REAR PANEL CONNECTIONS
9
+ ALARM IN -
MIC LINE ALARM OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLICADDRESS SYSTEM
SERIAL NO:
~220V 50Hz
T1AL250V
ALARM MATRIX
~220V 50Hz
T1AL250V
~220V 50Hz
T1AL250V
ADDRESSTAG COM
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
IN 1-15
IN 16-30
ADDRESSTAG COM
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLICADDRESS SYSTEM
SERIAL NO:
IN 1-15
IN 16-30
~220V 50Hz
T1AL250V
~220V 50Hz
T1AL250V
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
COM
INPUT A
+ INPUT B
+ ALARM A
+
ALARM B
+ CH 1 - +C H 3 - +C H 4 - +CH 5 - + CH 6 - + CH 7 - + CH 8 - + CH 9 - + CH 1 0 -+ CH 2 -
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM IN
+ 1 - + 2 - + 3 - + 4 - + 5 - + 6 - + 7 - + 8 - + 9 - + 10 -
ALARM OUT
~220V 50Hz
T1AL250V
SPEAKER SELECTORS
EMERGENCY PANEL
T-6225

7.SPECIFICATIONS
10
MODEL
EMERGENCY SWITCHEMERGENCY SWITCH
T-6225
DIMENSION(mm)
NET WEIGHT
GROSS WEIGHT
484X368X88
POWER CONSUMPTION
POWER REQUIREMENTS
~220V/50Hz
6.5Kg
5.3Kg
30W
T-6225

100
Over
100
Over
Over
100
8. DIMENSIONALDIAGRAM
UNIT :mm
6
84 84
25
337
331
88
94
436
484
UNIT :mm
11
~220V 50Hz
T1AL250V
~220V 50Hz
T1AL250V
ADDRESSTAG COM
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
AVIS:
PUBLIC ADDRESS SYSTEM
SERIAL NO:
IN 1-15
IN 16-30
POWER
T-6225
ALARM MATRIX
ON
OFF
1 2 34
RESET
ADJACENT ZONE
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
12345678910
ALARM ZONES
POWER
T-6225
ALARM MATRIX
ON
OFF
1234
RESET
ADJACENT ZONE
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
12345678910
ALARM ZONES
T-6225

AUDIOAUDIO
Guangzhou ITC Electronic Technology Limited
Http://www.itc-pa.com.cn
PUBLIC ADDRESS SYSTEM
2008-03 Version1.1