ITC TS-9 User manual

3.The net cast out of the LOGO
signs.
4.Will be provided with the product
Hexagon Wrench insert LOGO just
out of position, The back of the slow
rotation of the mounting hole release
Clamp.
5.The product installed on the
stent.
6. Hexagon Wrench used to clamp a
little tight solid product, and then
to the product required direction,
and then to fully clamp fastening,
LOGO will be back in situ marker.
6
1. The mounting brackets by icons
on the wall with screws.
2.The word screwdriver bolt icon to
insert the location of the bolt down
onto the top.
2
4
1
3
5
Product installation steps:
3
7mm Wall Mount Speaker
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.

Readers
Indoor Mount speaker provides the public places with the background
music, broadcast and fighting alarm. It is widely applicable for the
restaurant, commercial mansion, factory, commercial districts, spuare,
school, supermarket, snack bar etc.
Safety Tips:
Please be sure to use the former Reading detailed notes.
Really pay attention to this manual and a safety with the important warning.
Recommend that you keep this manual for future reference.
Common warning signs and security
The manual shown warning signs and security is to prevent the improper
operation due to personal injury arising from the and loss of property,
please read before using this product must understand that this manual
security symbols and Warning to indicate fully aware of potential risks.
Definitely will not be allowed to speakers and any exposure in the rainwet
or water, may be inconsistent with , or fire.
Restricted by the provisions of the speakers on the voltage, such as the
use of high voltage may cause electric shock or fire disaster. Is no
pruning, distorted, or replacement of damaged wires.
Avoid instability in the installation or set up speakers, such as shaking
the table or flat surface, The speaker can avoid falling caused personal
injury or property damage.
Speakers will be installed in support of the speaker or the weight of a solid
shelf. Speaker swap can be avoided caused personal injur y or property
damage.
Wet hands must not be admitted into or plugs, may lead to electric shocks.
The allocation of plugs, make sure that pull plugs, rather than pull wires.
the use of a damaged power line of machinery may cause fire or ele ctric
shock.
Mobile speaker, you plug the prior allocated. If the speaker and plugs may
be moving together will cause fire or electric shock. For plugs, identified
as plugs for grip.
Avoid speakers installed in the humidity or dust, direct contact with the
sun, from the near-electric, or smoke or steam, may cause fire or electric
shock.
When installed loudspeakers :
12
Descriptions:
Single 18-inch low-speakers, the use of net enclosures used (black /
white) low-loss speaker rough surface reticulate network, the appearance of
significant zhuo The atmosphere,but also a more transparent sound quality,
purity.Stiffness to provide full, strong bass rhythms, specifically for small
Disco-type systems.
Connection:
The speaker's "+" side (red) with the power of the "+" side (red) to connect,
"-" terminal (black) and the power of “-" Terminal (black) connection.
ON
OFF
POWER CLIP OL
VOLUME
PROT
5
0
1
2
3
4 6
7
8
9
10
350-WATT AMPLIFIER
SIGNAL
INPUT
Then after a good line, should be the volume of power to minimize twisting,
and then open the amplifier, select the appropriate program source, the volume
can be opened to the appropriate location.
Specifications:
Model
Power Taps@100V
Power Taps@70V
Impedance
Sensitivity
Freq response
Dim
N.W
TS-9/9W
5W,10W,20W,40W,80W
2.5W,5W,10W,20W,40W
Black:COM,Red:2K /1K /500 /250 /125 /8
94dB
100Hz-17KHz
280 225 375mm
Warning Such as the inappropriate use of staff will cause
injury, death and property damage.
6.2Kg