Itec Song display 2/3 User manual

SONG DISPLAY
WITH REMOTE CONTROL RC.12
Designed and Manufactured by
ITEC Tontechnik und
Industrieelektronik GesmbH
8200 Laßnitzthal 300
Austria / Europe
WITH
R
R
EE
M
M
MANUAL

2 www.itec-audio.de SONG DISPLAY / REMOTE CONTROL RC.12
MANUAL ITEC SONG DISPLAY
Turn On Press the red button on the remote control
Turn Off Press and hold the button for approximately 2 seconds.
NORMAL OPERATION
Display a Song:
After the display is turned on, you can send the first line (e.g. number of the song) to the display using the re-
mote control. Simply enter the desired numbers on the remote control and press OK to transmit the numbers
to the song display. You can correct your input using the C button.
Example: Display song number 137:
1 3 7 OK
Display a Strophe:
Switch to the second line (usual place for displaying strophe numbers) by pressing .
Example: Display strophe 1 to 3:
1 - 3 OK
Remark: Song number and strophe can also be transmitted to the song display together. You can do so by
entering song number and strophe range and pressing OK after both entries. You can also change only the
strophe display (second line) by pressing first, entering the new text for line 2 of the display and the pres-
sing OK .
Clear the Display: Press C
Restore Display: Press OK
Remark
Double frame on display means that the numerics are viewable on the display panel.
Basic frame on display means that the numerics are turned off on display panel.
To enter the next song you simply begin with numeric entry, independent if display is cleared or not.
Enter Letters:
Switch to text mode by pressing TEXT. You can now enter text similar to writing an SMS on a mobile phone:
Example: Text “GL”
TEXT
1x Key 4 (GH I)
3x Key 5 (J K L)
OK
SONG DISPLAY

www.itec-audio.de 3
SONG DISPLAY / REMOTE CONTROL RC.12
MENU MODE
You can access the menu mode by pressing MENU . Menu mode offers the following options.
1. BRIGHTNESS
You can set the brightness of the letters on the display.
If you have more than on display connected, this setting will affect all the displays. If you would like to con-
figure different brightness settings per song display, you can set a delta from the main setting by accessing
MENU > MISC > SINGLE DISPLAY
2. PERIOD of ILLUMINATION
This setting determines how long the display will be lit. Value is in seconds – e.g. 300 equals to 300 seconds,
i.e. 5 minutes.
3. MISCELLANEOUS
You can access various options here:
1. SingleDisplay(iftherearemultiplesongdisplaysconnected).Youcansetthedisplaybypressing+/-and
select it with OK .
2. LCD Display - set the contrast of the display
3. Battery – displays the voltage and remaining capacity of the rechargeable battery
4. Info – displays additional information like version numbers, error codes, etc. Press OK for additional
infos.
EXIT brings you back one step in the menu.
SONG DISPLAY

4 www.itec-audio.de SONG DISPLAY / REMOTE CONTROL RC.12
PROGRAMMABLE MODE
You can access programmable mode by pressing PROG You can select from 4 different sequences that you
can create yourself.
First, select one of the 4 configurations.
Remark: You can change the name of the sequence by pressing PROG a second time.
The program menu offers following options:
1. Start: An existing sequence is started.
jump to the next song
jump back to the previous song
OK display the selected text on the display
C clear the display
During the run of the sequence, you can always enter a song number manually or change a strophe.
EXIT always brings you back to the previous step in the menu.
2. Input: Enables you to create a new sequence. If the selected slot already contains a sequence, you
will be prompted if you want to replace or edit it.
First, choose 1 for “new” or 2 for “edit”
Then, select the sequence step using the + and – keys and enter the song number and
strophe number as usual.
Every line has to be confirmed by pressing OK
Press the + key for the next step.
After all sequence steps are complete, press OK a final time to save your sequence. You will be prompted
one last time.
Other possibilities to edit in INPUT mode:
PROG enter a new step before the current step
C clear the current text
create a new step after the current step
EXIT brings you back to the previous step in the menu without saving the sequence.
3. Preview: Preview starts the selected sequence. After the last number, the display will darken for a
short while, after which the preview starts again.
EXIT brings you back to the previous step in the menu.
+
-
+
SONG DISPLAY

www.itec-audio.de 5
SONG DISPLAY / REMOTE CONTROL RC.12
STATUS INFORMATION
1. Connectivity
In case of connectivity issues, a ! symbol will appear on the top left of the remote control display.
For details on the error, you can access MENU > SYSTEM > MISC.
2. Number of active display
You can remote control up to 6 displays simultaneously.
If no active display is detected, a small x symbol is displayed.
If the transmitter module is not functioning properly, a ! symbol is displayed.
3. Battery level
Battery is fully charged – Displayed while in battery operation
75% charged
50% charged
25% charged
Battery is empty. Symbol will flash. After 4 minutes, the device will turn itself off.
Battery is being charged as long as the arrow symbol is moving. The symbol stops moving when
charging is complete.
1. Connectivity 2. Number of active displays
3. Battery level
SONG DISPLAY

6 www.itec-audio.de SONG DISPLAY / REMOTE CONTROL RC.12
BATTERY CHARGING AND MAINTENANCE
The remote control is equipped with a high-capacity, maintenance-free rechargeable battery utilizing lead-gel
technology. Reliable operation can be expected for many years if you do not maltreat the battery.
A fully charged device can operate on battery power for up to 8 hours.
Charging is commenced by plugging in the power supply unit that ships with the product. Charging is
independent from the device being switched on or off. However, charging is faster when turning the remote
control off. Charging an empty battery takes about 12 hours. However, even after one hour of charging
considerable battery levels are reached.
OVERCHARGING GUARD
The device cannot be overcharged due to the integrated overcharging guard. You can leave it connected to
the power grid at all times if you wish.
DISCHARGING GUARD
Discharging a rechargeable battery totally can lead to permanent damage to the battery. We have integrated
a discharging guard to prevent this from happening. The device is automatically powered down when critical
battery levels are reached. You will see a flashing battery symbol on the display a few minutes before it is
powered down.
CAUTION: Do not store the remote control at temperatures below +5 degrees Celsius for longer periods of
time to ensure optimal life time of the rechargeable battery.
The song displays do not contain any parts that are sensitive to temperature so they may be exposed to the
cold. Proper operation is possible at temperatures from 0 to 40 degrees Celsius.
SONG DISPLAY

www.itec-audio.de 7
SONG DISPLAY / REMOTE CONTROL RC.12
SETUP MULTIPLE DISPLAYS
CAUTION: The following steps should be performed by qualified staff only. Unauthorized opening of the song
display and unauthorized tampering with the factory settings may result in damaging the device and warranty
void.
SETTING DISPLAY ID:
Each song display is identified by an ID. The default ID is 1. If you would like to use multiple song displays,
each of them has to have a different ID. Up to 6 displays can be controlled simultaneously. IDs can be set via
the DIP switches on the master module (the module to the top right).
ID Switch1 Switch2 Switch3 Switch4
1 ON OFF OFF OFF
2 OFF ON OFF OFF
3 ON ON OFF OFF
4 OFF OFF ON OFF
5 ON OFF ON OFF
6 OFF ON ON OFF
CHANGE FACTORY DEFAULTS:
To access the special mode for changing factory settings, perform the following steps.
Access MENU > MISC > INFO
· Press PROG and 2 simultaneously
ENTER NUMBER OF DISPLAYS:
The keyboard is pre-configured for up to 3 song displays. If your setting includes more than 3 displays, you
have to change the configuration of the keyboard. To do so, perform the following steps in the factory settings
menu.
- Press 2 to access remote control settings
- Press 3 to change the number of displays
CHANGE DISPLAY NAMES:
Each display can be given a name for easier identification. This name appears on the display if the brightness
is set for example. To change the name, perform the following steps in the factory settings menu.
- Press 1 to access song display settings
- Press 3 to change the display names
CHANGE LANGUAGE:
You can change the language of the remote control menu. This can be done by accessing the hidden menu
option
· MENU > MISC > 5
SONG DISPLAY

8 www.itec-audio.de SONG DISPLAY / REMOTE CONTROL RC.12
8
www.it
ec
-
aud
i
o
.
de
SO
N
G
DI
S
PLAY
/
REM
O
TE
CO
NTR
O
L R
C
.1
2
430 mm
550 mm (Song display 2/4)
120 mm
430 mm (Song display 2/3)
210 mm
285 mm
m
(Song display 2/4 - 60)
INDICATING PANEL
TYPE ITEC Song display 2/3 ITEC Song display 2/4 ITEC Song display 2/4 - 60
Lines / Characters 2-line with 3 characters each * 2-line with 4 characters each * 2-line with 4 characters each *
Character Height 120 mm 120 mm 60 mm
Reading Distance Up to 50 m approx. Up to 50 m approx. Up to 10 m approx.
Dimensions (H x W x D) 430 x 430 x 20 mm 550 x 430 x 20 mm 285 x 210 x 20 mm
Weight 3.5 kg approx. 4.2 kg approx. 1.2 kg approx.
Color (frame, screen) white (brown on request) white (brown on request) white (brown on request)
Color of the Characters red (yellow, green on request) red (yellow, green on request) red (yellow, green on request)
Display Technology Dot-Matrix 10 x 16 Dot-Matrix 10 x 16 Dot-Matrix 5 x 8
Display Alphanumeric Characters
Display Special Characters
Adjustable Luminosity
Remote Control 434.4 MHz transmitter/
receiver 434.4 MHz transmitter/ receiver 434.4 MHz transmitter/ receiver
Power Supply 230 V Power Supply
Unit, pluggable 230 V Power Supply Unit, pluggable 230 V Power Supply Unit, pluggable
OPTIONALACCESSORIES
Hinge set or Rotate- and tiltable mount
Power supply for an in-wall connector
*other display dimensions on request
REMOTE CONTROL KEYBOARD
TYPE Remote Control Keyboard ITEC-RC.12
Display 4-line with 16 characters, white/blue
Keyboard Coated keyboard with 20 large, clearly arranged buttons
Power Supply Built-in rechargeable battery, Charger/Power Supply Unit 230 V / 7V
Battery life 10 hours
Memory 4 sequences with up to 20 song- or verse numbers each
Memory Technologie Flash memory, survives power-loss
Remote Control 434.4 MHz transmitter/receiver, 2 channels to choose
Dimensions (H x W x D) 120 x 200 x 35 mm approx.
Weight 0.7 kg approx.
ships with the product surcharge
SONG DISPLAY / REMOTE CONTROL RC.12 - SPECIFICATIONS SONG DISPLAY
ITEC- Tontechnik und Industrieelektronik GesmbH, A-8200 Lassnitzthal 300 / Austria / Europe
Tel.: [phone] / 3780-0, offi[email protected], www.itec-audio.com
All information without guarantee. Subject to technical changes.
35 mm
200 mm 120 mm
m
m
2
00
mm
12
0
mm