Itek I58007 User manual

INSTRUCTION MANUAL
Q U A LITY REFLECTED
®
BLUETOOTH EARPHONES I58007
TO: CUSTOMER SERVICES DEPARTMENT ITEK SUTTON HOUSE BERRYHILL ROAD, FENTON STOKE ON TRENT ST4 2NL
Please place post-
age stamp here
Q U A LITY REFLECTED
®

This product is guaranteed for 12 months from the date of the original purchase.
If any defect arises due to faulty materials or workmanship the faulty products must be returned
to the place of purchase. Refunds or replacement is at the discretion of the Retailer .
The following conditions apply:
The product must be returned to the retailer with the original proof of purchase.
The product must be installed and used in accordance with the instructions contained in this
instruction guide.
For domestic purposes. ONLY.
It does not cover wear and tear, damage, misuse or consumable parts.
PFD has no responsibility for incidental or consequential loss or damage.
Valid in the UK and Eire only.
Technical Specication.
Product Code I56007
Bluetooth specication : Bluetooth V2.1+ EDR
Bluetooth proles HSP, HFP,A2DP and AVRCP
Operating distance 8 ~10 meters
Working time Music: Up to 4 hours (VOL 60%)
Talk: about 3 hours
Standby time 50 hours
Charging input voltage DC5V---140mA
Charging time 3 hours
Dimensions 15.5 x 25 x 700 mm
Weight 10g
Sutton House,
Berryhill Road,
Fenton
Stoke on Trent
Staffordshire,
ST4 2NL.
PARTS IDENTIFICATION
1. Power On/Off Button/Receive
call/End a call
Multi-Function Button (MFB)
2.Volume Up / Skip Forward Button
3.Volume Down / Skip Backward Button
4.Microphone
PACKAGE CONTENTS
• Bluetooth Earphone
• USB Rechargeable Cable
• Instruction Manual
• Spare Ear Buds – 2 pairs (Diameter : 10 mm and 14 mm)
INSTRUCTIONS FOR USE
CHARGING THE INTERNAL BATTERY
The earphones come with a built in rechargeable battery. Before using it for the rst time we
recommend you charge the battery fully.
Only use the supplied USB Cable to charge the earphones. Connect the USB cable
to a computer USB port and the USB plug to the charging jack of the earphones.
The red LED illuminates while the earphones are charging.
A full charge of the battery takes around 3 hours.When the battery is fully charged the LED
will turn blue.
When the battery is low, the LED will ash red and emit three tones every 20 seconds. When
this occurs, please recharge the earphones.
TURNING ON/OFF THE HEADPHONES
To Power on: Press and hold the Power ON/OFF button for 3~4 seconds, the red and blue
lights ashes together, then the LED will ash blue.
To Power off: Press and hold the Power ON/OFF button for 3~4 seconds, the red and blue
lights will ash together, then ashing. will stop
In order to save power, the earphones will automatically turn off if no devices are paired
after 5 minutes.
PAIRING THE EARPHONES WITH BLUETOOTH DEVICES (phone or music device)
Ensure the earphones are turned off, otherwise turn it off rst and then press and hold the
Power ON/OFF button for 5-7 seconds until the LED ashes red and blue alternatively.
The device enter pairing mode.
Place the earphones and Bluetooth device (phone or music device) so that they are no further
than 1 meter apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device).
Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your
device. If you are unsure on this operation.
Once you have activated Bluetooth on your device, select the earphones “SL EARPHONE” from
the list of available Bluetooth devices.
If required, enter the password ‘0000’ to conrm to nalize pairing.
Once paired successfully, the LED will not ash red and blue alternatively. It will continue to do
this while paired.
You can now start to use the earphones.
If pairing is unsuccessful, turn off the headphones rst and then re-pair following the above steps.
Once you have paired the earphones with a device, the earphones will remember this device
and will pair automatically when the device’s Bluetooth is activated and in range.
You do not need to re-pair any previously connected devices.
The earphones will attempt to automatically connect to the last device it was paired with when
switched on.
If you want to pair it with a new device please follow the steps outlined above.
Once the earphones are paired with your device the music will transmit directly
to the earphones. Please refer to your device’s user manual for further information.
GUARANTEE

SAFETY INFORMATION
Please read all safety information and operating instructions before using the
I58007 to avoid injury.
BLUETOOTH COMMUNICATION
Bluetooth wireless technology operates within a range of about 10 m (33 feet).
Install the transceiver and any connected Bluetooth device as closely to each other
as possible.
The following conditions may have a negative effect on the Bluetooth connection:
• Certain obstacles (people, metal, walls, etc.)
• An electromagnetic environment
• A device with a 2.4 GHz frequency (e. g. a Wireless LAN device, cordless
telephone, or microwave oven) in use near this device. Because Bluetooth
devices and Wireless LAN (IEEE802.11b/g) use the same frequency, microwave
interferences may occur.This may lead to communication speed deterioration,
noise interference or invalid connections. In such cases, turn off the respective
device to avoid interference.
• The device is installed on a metal surface.
Microwaves emitting from a Bluetooth device may affect electronic medical
devices.To avoid accidents, turn off this device and other Bluetooth devices in the
following locations:
• Near ammable gas
• In a hospital, train, aeroplane, or a fuelling station
• Near automatic doors or a re alarm
This device supports security capabilities that comply with the Bluetooth standards
to provide a secure connection when the Bluetooth wireless technology is
used, but security may not be enough depending on the setting. Be careful when
communicating using Bluetooth wireless technology.
Any Bluetooth device you want to connect to the transceiver is required to conform
with the Bluetooth standard specied by Bluetooth SIG.
Even if the connected devices may conform with the Bluetooth standard, some
devices cannot be connected or will not work correctly depending on the features
or specications of the device.
For more information on Bluetooth safety and features, please visit www.
Bluetooth.com.
USING CONNECTORS AND PORTS
Never force a connector into a port. Check for obstructions on the port. If the
connector and port don’t join with reasonable ease, they probably do not match.
Make sure that the connector matches the port and that you have positioned the connector
correctly in relation to the port.
AVOIDING HEARING DAMAGE
Set the volume to a safe level.
You can adapt over time to a higher volume of sound that may sound normal but this can
be damaging to your hearing.
If you experience ringing in your ears or muted speech, stop listening and have your hearing
checked.
The louder the volume, the less time is required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
Limit the amount of time you use the I58007 at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near you.

Model no: Serial no: Batch no: Name: Address: Date Purchased: E-mail Address: IMPORTANT This warranty is invalid if alterations have been made to this certicate
Dealer Stamp/Details: If you would NOT like to receive special offers and promotions from PFD and it’s associated companies please tick this box
Q U A LITY REFLECTED
®
Disposal of Unit
Disposal instructions for Itek items in accordance with the WEEE directive.
Appliances bearing the symbol shown here may not be disposed of in domestic
rubbish.You are required to dispose of old electrical and electronic appliances like this sepa-
rately. Please visit www.recyclemore.co.uk, or www.recylcenow.co.uk for access to information
about the recycling of electrical items.
Please visit www.weeeireland.ie for access to information about the recycling of
electrical items purchased in Ireland.
The WEEE directive, introduced in August 2006, states that all electrical items must be recycled,
rather than taken to landll. Please arrange to take this appliance to your local Civic Amenity
site for recycling, once it has reached the end of its life.
Declaration of Conformity
We PFD Ltd Declare that this product conforms to all the following
product legislation
In accordance with the following directive(s):
2004/108/EEC.The Electromagnetic compatibility Directive
2006/95EC.The LVD directive (LowVoltage Directive)
2002/95/EC. The RoHS. Directive. (Restriction of Hazardous substances Directive)
Peter Bowden
Quality Assurance Manager
Sutton House, Berryhill Road, Fenton, Stoke-On-Trent, Staffordshire, ST4 2NL.