3
Using Your Glow
Power & Device Charging:
1. Connect included power supply to power jack on Glow base and to wall outlet.
2. To charge your mobile device, connect its cable to USB port on Glow base.
Setting Clock & Date:
When powering on for the first time, your Glow will default to the clock and date setting menu. ‘12:AM’ will
flash on the display. To get back to this menu at any time, slide the Alarm Mode Slider to the position
and long-press .
1. Press to adjust hour. Press and hold for scrolling.
2. Press . Display will flash ‘Minute’.
3. Repeat step 1-2 to adjust minute, day, date, month, and year.
Note! When displaying PM hours, display will show ‘PM’, and bottom left side will show a lit dot. When
displaying AM hours, display will show ‘AM’, and bottom left side dot will be off.
4. Press . Display will flash ‘BEEP’, then ‘ON’, indicating button beep sound menu. Press to turn
button beep sounds ON or OFF.
5. Press . Display will show ‘BRI’, indicating display brightness menu. Display will then flash ‘HIGH’ in very
bright lettering. Press to toggle between HIGH, MED and LOW.
6. Single press . Glow will save settings and revert to clock screen.
7. To toggle between time, date and year while in clock screen, Press repeatedly.
8. These setting will be saved even when unplugging the unit
Pairing Bluetooth:
1. Press and hold . Display will show ‘BT’ and arrow animation, and backlight will light up.
2. will flash during pairing. Once pairing is successful, will turn off and Glow will revert to clock
screen.
Playing Bluetooth Music:
1. Press . Music modes will flash. Press to scroll to BT mode.
2. Press . Music playback will start. Display will flash ‘SONG’ for 3 seconds.
3. While ‘SONG’ is flashing, press to play next or previous song. Display will show ‘NEXT’ or ‘PREV’.
4. While ‘SONG’ is flashing, press and hold to fast forward or rewind song. Display will show ‘FF’ or
‘REW’.
5. After step 3 or 4, or after 3 seconds of inactivity, Glow will revert back to clock screen. Long-press
to start, pause and resume music playback.
6. To get back to song changing/scrolling while in Bluetooth mode, press . Display will show ‘BT’. Follow
steps 3 and 4.
Note! Your Glow features Bluetooth memory. A single press of will recall and connect to your
previously paired device.
