Ivation RECHARGEABLE LED FLOODLIGHT User manual

RECHARGEABLE
LED FLOODLIGHT
Ultra Bright & Water Resistant
User Manual
Introduction
Thank you for purchasing our Rechargeable LED Floodlight, and welcome to the Ivation™ family. This user manual is meant to
oer you a brief walkthrough of the device’s features and usage protocols. We hope you find this manual helpful. For additional
information and technical support, please feel encouraged to contact our help team at [email protected].
Intended Use
Highly rugged and water resistant, this lamp puts out a powerful, wide light field that banishes the dark in an instant. It is rated at 10
watts and is suitable for work, sports, parties, search and rescue and much more.
Box Contents
1 x Rechargeable LED Floodlight
1 x Stabilizer Base w/Rubberized Feet
1 x Flower-Capped Screw
1 x Wall Charger
1 x Car Charger
1 x User Manual
Parts & Controls
1. Cushioned Grab Handle
2. Toughened Glass Cover
3. Super-Bright LED
4. Rechargeable Battery
5. Power Switch (w/Cover)
6. Position-Lock Screws
7. Charging Jack (w/Cover)
8. Predrilled Screw Hole
9. Flower-Capped Screw
10. Stabilizer Base
1
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgefield Park, NJ 07660
[e-mail]
MADE IN CHINA
IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved
47
5
10
8
8
9
2 3

Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgefield Park, NJ 07660
[e-mail]
MADE IN CHINA
IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved
Operation
Assembly:
- Place Stabilizer Base (10) on flat surface. Ensure rubberized feet touch surface and green bar is up.
- Align Predrilled Screw Hole (8) with hole on Stabilizer Base (10).
- Insert Flower-Capped Screw (9) into aligned holes and turn clockwise until tight. Usage:
- Point lamp away from face and eyes, and toggle Power Switch (5) to On position.
- Use Cushioned Grab Handle (1) to tilt lamp up and down, and tighten Position-Lock Screws (6) to direct light where desired.
- Lamp can pivot right and left while connected to Stabilizer Base (10).
Charging:
- Uncover Charging Jack (7) and insert smaller end of either included charger.
- Plug other end into wall outlet or car charging outlet.
- Lamp may be used while charging.
Technical Specifications
Dimensions: 5.8” x 6.6” x 9.5”
Weight: 2.1 Pounds
Material: Die-Cast Aluminum
Power: 10 Watts
Bulbs: Super-Bright LED
Brightness: >500 Lumens
Bulb Life: 50,000 Hours
Charging Time: 5 Hours
Light Time: 2 Hours Per Charge
Water Resistance: IP65
Working Environment: -40°F to 131°F