Ivation IVAMIKCBTSBLK User manual

MINI KEY CHAIN
BLUETOOTH SPEAKER
USER MANUAL
INTRODUCTION
Thank you for purchasing our Mini Key Chain
Bluetooth Speaker, and welcome to the Ivation™
family. This user manual is meant to oer you a brief
walkthrough of the device’s features and usage protocols. We
hope you find this manual helpful. For additional information and
technical support, please feel encouraged to contact our help team at
[email protected].
BOX CONTENTS
1 x Bluetooth Speaker
1 x Micro-USB to USB Charging Cable
1 x Wrist/Hanging Strap
1 x User Manual
PARTS & CONTROLS
1. Multifunction Button
2. Blue LED Indicator
3. Built-In Microphone
4. Back/Volume- Button
5. Red LED Indicator
6. Power/Play/Pause Button
7. Forward/Volume+ Button
8. Micro-USB Charging Port
9. Auxiliary In Jack
OPERATION
Basics:
- To play music from any compatible device
without connecting over Bluetooth network, insert any
standard 3.5mm to 3.5mm cable into Auxiliary In Jack (#9).
- To charge built-in battery, connect included cable to
Micro-USB Charging Port (#8). Plug other end into computer USB
port, or connect to AC adapter and plug into wall outlet. Red LED
Indicator (#5) will remain lit while charging.
Power and Volume:
- Power on by pressing and holding Power/Play/Pause Button (#6) for 3
seconds.
- Adjust output volume by long-pressing Back/Volume- and Forward/Volume+
buttons (#4 &#7).
- Power o by pressing and holding Power/Play/Pause Button (#6) for 3 seconds.
Note: The volume levels of your connected device equally aect the possible
volume levels of the Bluetooth Speaker. Ensure connected device’s volume is
adequately loud.
Bluetooth Pairing:
-- Power on by pressing and holding Power/Play/Pause Button (#6) for 3
seconds.
- Press and hold Multifunction button (#1) for 2 seconds. Blue and Red
LED indicators (#2 & #5) will flash alternatingly. Device is now in
pairing mode.
- Turn on Bluetooth function on mobile device you wish
to connect.
- When “IVAMIKCBTS” appears on your
mobile device,
select it.
- Audile confirmation will sound. Devices
are now connected.
Disconnecting:
- Power o Bluetooth Speaker by pressing and holding
Power/Play/
Pause Button (#6) for 3 seconds, or disable Bluetooth function on
your connected device.
Music Playing:
- Once Bluetooth Speaker is connected to your mobile device via Bluetooth,
any music you play on your device will stream to the Bluetooth Speaker’s
loudspeaker.
- Press Power/Play/Pause Button (#6) to pause playback.
- Short-press Back/Volume- and Forward/Volume+ buttons (#4 & #7) to scroll
between songs.
Notes: Your connected mobile device must support this music player
control feature. Pair and connect your mobile device with Bluetooth Speaker
before using this feature.
Phone Calling:
- Incoming calls will pause music, and speaker will stream incoming call tone.
Use the Multifunction Button (#1) as follows:
• Press once to answer incoming call
• Double-press to reject incoming call
• When connected, press and hold for 3 seconds to take
call private
• Press once to end connected call
• Double-press at any time to redial
- Music will automatically resume after
call is done.
TECHNICAL
SPECIFICATIONS
Speaker Cone: 31mm
Power Output: 2 Watts
Audio IC: HT 6871 Class D
Bluetooth: 3.0
Transmitting Range: 33 Feet
Battery Capacity: 350mAh
Continuous Playback Time: 4-6 Hours
Output: 3.7v
Input: 5V 200mA
Audio Input: 20mv-500mv
Frequency Response: 100Hz-20KHz
Separation: S/N >85db
Distortion: THD <10%
Operating Temperature: 14°F – 122°F
Dimensions: 1.41” x 1.41”
Weight: 1.51 Ounces
TROUBLESHOOTING
No/Low Sound:
- Check for adequate battery charge level
- Increase volume level by long-pressing Forward/Volume+ Button (#7)
Distortion or White Noise:
- Move Bluetooth Speaker closer to connected mobile device
- Look for interference e.g. brick walls, nearby mobile devices
- Lower volume on Bluetooth Speaker and/or on connected mobile device
- Check for adequate battery charge level
- Check integrity of music files on connected device
- Power o Bluetooth Speaker and mobile device, then power back on and reconnect
Unable to Pair with Bluetooth Device:
- Ensure that your mobile device is Bluetooth compatible
- Check for adequate battery charge level
- Power o Bluetooth Speaker and mobile device, then power back on and
reconnect
Warning: Changes or modifications to unit other than those
expressly approved by party responsible for compliance
could void user’s authority to operate this
equipment.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Important: Changes or modification to this product are not authorized and could void
the FCC compliance as well as negate your authority to operate this product.
Distributed byC&A Marketing, Inc.
2 Bergen TurnpikeRidgefieldPark, NJ 07660
[email protected]
MADE IN CHINA
IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved
2
3
4
5
1
7
6
98