IXSEA Rovins User manual

Quick Start
Guide
Quick Start
Guide
Rovins
gyro to ins

1
2010-05/MU/ROVINS-001-B
FOREWORD
ROVINS QUICK START GUIDE
Objective
This guide describes how to install the ROVINS, and the basic configurations required before beginning the positioning
Contents
OBJECTIVE...........................................................................................................................................................................................01
CONTENTS...........................................................................................................................................................................................01
CONVENTIONS.....................................................................................................................................................................................02
ROVINS SYSTEM OVERVIEW.................................................................................................................................................................03
VERIFICATION OF PACK CONTENTS ...................................................................................................................................................03
BASIC INSTALLATION..........................................................................................................................................................................03
STEP 1 - INSTALLING ROVINS...............................................................................................................................................................05
STEP 2 - ACTIVATING THE PRODUCT LICENSE....................................................................................................................................10
STEP 3 - CONFIGURING ROVINS.......................................................................................................................................................19
STEP 4. NAVIGATING WITH ROVINS.....................................................................................................................................................24
MORE......................................................................................................................................................................25
CUSTOMER SUPPORT..........................................................................................................................................................................29
IXSEA CONTACT...................................................................................................................................................................................30

22010-05/MU/ROVINS-001-B 3
2010-05/MU/ROVINS-001-B
The following conventions are used in this guide
The symbol leads you through nested menu items and/or dialog box options to a final action.
Example:
Logging Configure Logging Parameters means “Select Configure Logging Parameters option
from the Logging pull down menu”.
bold Bold text is used for items you must select or click in the software.
It is also used for the field names used into the dialog box.
Courier Text in this font denotes text or characters that you should enter from the keyboard, the proper
names of disk Drives, paths, directories, programs, functions, filenames and extensions.
italic Italic text is the result of an action in the procedures.
CONVENTIONS ROVINS SYSTEM OVERVIEW
The ROVINS system is an Inertial Navigation System (INS). It delivers heading and attitude information as well as po-
sition and speed, to other systems or to display. It can receive data from other sensors to improve its accuracy. The
ROVINS system can also be used as a gyrocompass. The core of ROVINS is an inertial measurement unit (IMU). The IMU
is the assembly of three fiber optic gyroscopes (FOG) manufactured by IXSEA and three high precision pendulum-type
accelerometers.
Apart from its IMU, ROVINS contains a self-consistent navigation algorithm based on Kalman Filtering. This structure
enables ROVINS to work either as a black box or to be connected to external sensor systems (GPS, Doppler Velocity Log,
Depth sensor, acoustic positioning systems …). In conjunction with external sensors, ROVINS Kalman filter exceeds by
several orders of magnitude the performances obtained with traditional navigation approaches
ROVINS is delivered with a powerful and easy-to-use WEB-Based User Interface, which allows a complete configuration.
You will find in the shipping case a Packing List detailing all the items delivered. This packing has been completed and
checked by IXSEA shortly before shipment, and should match the contents of the pack you have received.
However, we recommend that you check the contents of the pack and the equipment immediately on receipt of your
ROVINS unit. Specifically, you should check that all the items referred to above are present on delivery and that none has
sustained damage.
If you observe any non-conformity or damage, please inform the carrier and IXSEA without delay by certified mail, des-
cribing in detail the problem encountered.
This guide describes how to install ROVINS with a GPS, and the basic configurations required before beginning the
positioning. This is the basic installation. If you need to install additional external sensors, to define lever arms and/or
to enter installation biases, please refer to ROVINS User Guide. ROVINS being versatile, you have to define its configu-
ration to insure optimal operation.
In this installation, we assume that ROVINS is aligned with respect to the vessel reference frame.
This configuration includes:
• Defining how ROVINS is installed on board (ROVINS orientation with respect to the vessel reference frame, ROVINS
and GPS lever arms)
• The cable connections to other equipment (connection to the workstation, connection to the GPS)
• The activation of the product license
• The communication link, the serial or Ethernet link, the activation of the GPS , the pulse input for Time synchroniza-
tion System i.e., all settings to enter into ROVINS using the WEB-based User Interface
• Navigation
VERIFICATION OF PACK CONTENTS
BASIC INSTALLATION

42010-05/MU/ROVINS-001-B 5
2010-05/MU/ROVINS-001-B
Installing ROVINS + GPS
Activating the product license
Step 1:
Step 2:
To define the ROVINS orientation, lever arms, and the PC-ROVINS
communication parameters
To configure the GPS: serial or Ethernet input parameters, lever arm
Configuring
To define the initial position
To activate the GPS (i.e., to take the GPS data into
account by the Kalman filter)
To activate the license code
To define the Time Synchronisation system
Step 3:
Navigating with ROVINS
Step 4:
5 min Heading standard deviation < 0.1

62010-05/MU/ROVINS-001-B 7
2010-05/MU/ROVINS-001-B
STEP 1- INSTALLING ROVINS
ROVINS is fixed onboard using six CHC M6 screws. It can be installed with any orientation with respect to the vessel (see
the definition of the vessel reference frame hereafter). The alignment of the unit is performed by means of the two cen-
tering pins located on the bottom plate of the ROVINS. You will find on Figure 1 all the mechanical information necessary
to fix ROVINS. All inertial measurements are default performed with respect to ROVINS reference frame (X1, X2, X3). This
reference frame is defined in Figure 1. Motion sensing measurements are default measured at ROVINS Center of Mea-
surement P (see Figure 1).
Recommendations and Note
• Temperature in operation must be in the range -20 °C to 55 °C
• The dimensions of the ROVINS housing are ((l x ø) in mm ): 374 x 213. There must be enough place for the wire way
on the connector side of ROVINS
• The weight of ROVINS is 14.6 in air and 4.65 in sea water
Figure 1 – Definition of ROVINS Reference Frame (X1,X2, X3) and P center of measurements

82010-05/MU/ROVINS-001-B 9
2010-05/MU/ROVINS-001-B
The roll is defined as the angle of
rotation perform around the vessel
XV1 so that the vessel axis XV2 lies
in the local horizontal plane. This
angle is default defined positive in
the direction of axis XV1, i.e., when
the boat port side is up. It varies
between -180 and + 180°. The figure
above is an illustration of the roll
angle with null pitch.
Once the axes XV2 and XV1 lie in
the local horizontal plane, the true
heading is the angle between the
vertical plane oriented in the North
direction and the vertical plane pas-
sing through the vessel. Heading is
counted positive from North, va-
rying from 0 to 360°. The orientation
of this angle is given above in case
of null pitch and roll.
Once the axis XV2 lies in the local ho-
rizontal plane, the pitch is the angle
between the axis XV1 of the vessel
and its projection in the local plane.
This angle is default defined positive
in the direction of the axis XV2, i.e.,
when the boat bow is down.. It varies
from -90 to +90°. The figure above is
an illustration of the pitch angle in
case of null roll.
Vessel reference frame
TRUE HEADING, ROLL AND PITCH DEFINITIONS
Xup
X
N
X
W
North pole
XN in the horizontal plane pointing towards geographical North
Xup, parallel to the local vertical, pointing up
XW in the horizontal plane, pointing towards West
Standard case defined as follows:
External sensor connected to the ethernet stream A of ROVINS:
GPS Output protocol on stream A: GPS like
PPS time synchronization pulse from the GPS cabled on the Pulse input B of ROVINS
Electrical Connections: GPS + PPS (optional for Time synchonization)
Standard Ethernet Link Case

10 2010-05/MU/ROVINS-001-B 11
2010-05/MU/ROVINS-001-B
GPS Antenna, Power supply, workstation
connected to the Ethernet connector
1.
4.
13.
8.
17.
.3
.7
.16
.12
.19
Case when Ethernet connection is not possible:
External sensor connected to the serial link A of ROVINS: GPS
Output protocol on serial link A: GPS like
PPS time synchronization pulse from the GPS cabled on the Pulse input
A of ROVINS In this case the workstation establishes a PPP connection with ROVINS
Refer to the ROVINS User Manual to know how to configure this PPP connection
ELECTRICAL CONNECTIONS: GPS + PPS (OPTIONAL FOR TIME SYNCHONIZATION)
SERIAL LINK CASE (WHEN ETHERNET CONNECTION IS NOT POSSIBLE)

12 2010-05/MU/ROVINS-001-B 13
2010-05/MU/ROVINS-001-B
STEP 2. ACTIVATING THE PRODUCT LICENSE (ONLY FOR UPGRADE CASE)
As soon as ROVINS is powered up it starts its alignment phase starting with the manually input position stored into RO-
VINS PROM. It is required that a valid initial position is input manually (see Step 3) or is given by the GPS. The alignment
sequence is detailed in Step 4.
Launching the WEB-based User Interface
Required environment :
• The workstation must be equipped with one of the following Web browser:
Mozilla Firefox version 3.5 and higher
Chrome version 4 and higher
Safari version 4 and higher
Opera version 10 and higher
Internet Explorer version 7 and higher
• Flash Player version 10 (and higher) must be installed on the workstation to visualize the compass
• For the data logging: Java Runtime Environment 1.6 (and higher)
They can be installed on your workstation from the provided IXSEA CD-ROM.
The communication with the workstation is performed directly through the Ethernet link.
ROVINS Web-based User Interface is then launched from the WEB browser hosted on the workstation. Its URL address
is 192.168.36.1xx, xx being the two last numbers of the ROVINS serial number:
The Control Pages opens:
During the first seconds the IXSEA logo is flashing gray/blue indicating that the
Web-based User Interface is loading the
internal configuration of ROVINS. Then the logo turns blue, the alignment sequence of ROVINS begins.
1.
5.
10.
11.
6.
16.
17. 21.
22. 25.
26.
2.
Power Cenral connector
Function
In Pin 1
In GND Pin 2
Pulse In Cenral connector
Function Pulse A
IN TTL Pin 20
GND_A Pin 21
RS232 Cenral connector
Function Link A
Tx Pin 11
Rx Pin 13
Tx Rx GND_A Pin 8
Repeater/com
with worksation
RS232
Cenral connector
Function Repeater
Tx Pin 9
Rx Pin 15
Tx Rx GND_R Pin 5
RS422 Cenral connector
Function Link A
Tx + Pin 11
Tx - Pin 12
Rx + Pin 14
Rx - Pin 13
Tx Rx GND_A Pin 8
Repeater/com
with worksation
RS422
Cenral connector
Function Repeater
Tx + Pin 9
Tx - Pin 10
Rx + Pin 16
Rx - Pin 15
Tx Rx GND_R Pin 5
GPS Antenna, Power supply, workstation
connected to the Central connector

14 2010-05/MU/ROVINS-001-B 15
2010-05/MU/ROVINS-001-B
Menu Bar
The menu is blue when selected
Navigation data window:
It displays all data either computer by ROVINS
or coming from external sensors
Maintenance page :
Firmware upgrades, system restaring, factory
settings reset, support contact.
options page :
position selection, language selec-
tion , day/night mode selection
System Status: color
and verbose display
Latitude,Longitude and
Depth or UTM positions
and Depth data
Heading, Roll,
Pitch,Heave
and Speed
data
Compass area
UTM northing 4784416.50 m
UTM easting 714025.03 m
Depth 25.30 m
IXSEA logo handling
A click on the IXSEA logo opens the detailed status/activation pop-up window and the compass disappears.
This window:
• Sums-up the status of
The input ports
The output ports
The system
The external sensors
• Enables the external sensors activation
You can close the pop-up by clicking on the IXSEA logo.
WEB-BASED USER INTERFACE - GENERAL RULES, COMMANDS AND NAVIGATION

16 2010-05/MU/ROVINS-001-B 17
2010-05/MU/ROVINS-001-B
Note
you can also use the up arrow ([]) and down arrow ([]) keys to scroll in the list.
Tick box
• By selecting it by clicking in the dedicated box:
Color Code
The color code applies for the indicators and text labels displayed in this pop-up window.
When a problem occurs, the color of the IXSEA logo changes and the detailed status pop-up automatically appears
showing immediately which equipment has raised the problem.
Table 1 – Color code definition
General Rules for Using Command Windows
The command windows allow you to display or modify ROVINS configuration parameters. At first delivery, these parame-
ters are set to default values. You have to modify them to fit your needs:
Scrolling list selection
• By selecting it directly in the scrolling list:
Color Definition
Grey inactivity
Flashing Grey/Blue System Configuration (during initialization for example)
Blue Activity, nominal operation
Orange Activity, warning
Red Activity, alarm
Text box
• By typing it in the dedicated area:
Note
You can also use the up arrow ([]) and down arrow ([]) keys to increase or decrease the numerical values.
Incorrect value are immediately indicated by red color:
Expanding hidden area
In order to keep each web-based page as small as possible, only the main parameters are default
visible. You can expand the hidden area by clicking on its text label title:
OK/Cancel buttons
Each command page contains the same buttons, they appear as soon as a modification or a selection
has been made in the command page:
To validate the new configuration and store it in the ROVINS PROM.
To return to the previous entered values.

18 2010-05/MU/ROVINS-001-B 19
2010-05/MU/ROVINS-001-B
Other Button
On “mouse over” action, orange color may surround a button to indicate that the action performed by
clicking on the button has consequences.
Examples of such action:
• ROVINS restart (the alignment process is repeated)
• Reset to factory settings (the customized configuration is lost)
PRODUCT LICENSE ACTIVATION (ONLY IN CASE OF UPGRADE)
Ask for the activation code: click on maintenance menu
on the ROVINS Web-based User Interface.
To recover the activation code, using
the «Contact Support» button, send a
message to IXSEA support giving your
ROVINS license ID.
Enter the recovered activation code in
the dedicated text box and click «Activate
License» button.
Step 2:
Step 3:
Step 1:

20 2010-05/MU/ROVINS-001-B 21
2010-05/MU/ROVINS-001-B
WEB-BASED USER INTERFACE - MENUS AND OPTIONS OVERVIEW
Find hereafter all the menus and options of the WEB-based User Interface and their uses
Menu /options Used to …
Define the ROVINS orientation, possible
roll, pitch and heading misalignments,
primary and secondary lever arms useful
to compute the heave and position for the
output protocols that provide it
Define the couple (external sensor or UTC,
input link): the protocol used to input the
data, the serial (parity, baud rate, standard
(RS232 or RS422) and stop bit) or Ethernet
(transport layer, IP address, Port number)
parameters, and the external sensor para-
meters (lever arms, misalignments (for the
DVL), beacon selection (for the USBL)
Define the Time synchronization settings
(UTC): pulse input selection for the PPS si-
gnal, the protocol to use for the PPS signal
Menu /options Used to …
Define the outputs: the protocol used to
output the data, the lever Arm to use, the
data rate or the input pulse to use to syn-
chronize the output data, the serial (parity,
baud rate, standard (RS232 or RS422) and
stop bit)or Ethernet (transport layer, IP ad-
dress, Port number) parameters, the pulse
output to output the envelop, the heave fil-
ter to use
Define the Network parameters for com-
munication through a serial link (PPP op-
tion) or through Ethernet one (DHCP client
mode activation, ROVINS IP address and
Network mask to use)
• Enter the initial position, save it, update it
• Choose the Zero Velocity mode
• To be informed in case of warning or er-
ror for
UTC synchronization loss
Position sensor loss
Speed loss
• To generate a warning when the heading
and/or the position standard devia
tion cross a defined threshold

22 2010-05/MU/ROVINS-001-B 23
2010-05/MU/ROVINS-001-B
Menu /options Used to …
To launch the DVL calibration
To save /restore product settings
Log the data of the repeater output or of
any A to E output.
• Restart your ROVINS Unit
• Update the system: firmware, loader,
and/or WEBBasedUser Interface versions
• To activate your license by entering the
activation code
• Get ROVINS serial number and WEB-
based User Interface
• Contact IXSEA Support
Display all navigation data computed and
received by ROVINS
Choose the position coordinate represen-
tation (latitude/longitude or UTM coordi-
nates)
Choose the display mode (night/day mode)
Choose the WEB-based language (English
or French)
STEP 3. CONFIGURING ROVINS
CONFIGURING THE ROVINS ORIENTATION WITH RESPECT TO THE VEHICLE
As ROVINS can be installed with any orientation with respect to the vehicle, ROVINS axes orientation can be different
from vehicle axes orientation, with 90 degrees rotations of any of the ROVINS axis with respect to the vehicle axes.
Choose MECHANICAL PARAMETERS
under INSTALLATION Menu
Click on Restart button in the warning window
that appears in the upper part of the Mechanical
Parameters page.
>ROVINS restarts, and alignment sequence
(see step. 4) is repeated.
Click the OK button to validate your choice.
• The direction to which the IXSEA logo side is
pointing.
> In the illustration, ROVINS logo side points to
the chosen direction.
• The direction to which the ROVINS connectors
side is pointing.
>In the illustration, ROVINS connectors side
points to the chosen direction.
Step 1:
Step 2:
Step 3:
Step 4:

24 2010-05/MU/ROVINS-001-B 25
2010-05/MU/ROVINS-001-B
CONFIGURING THE GPS INPUT STREAM AND GPS PARAMETERS
Click OK to validate and save your choices.
Activate the GPS (i.e., take into account the GPS data into the ROVINS Kalman
filter): In EXTERNAL SENSORS area (that is the detailed status pop-up in the
CONTROl page), set the activation parameter of the GPS to ON position by clic-
king on OFF button.
Define the GPS lever arms:
• LV1 is the signed distance from the ROVINS center of measurements to the GPS
along axis 1 of the illustration
• LV2 is the signed distance from the ROVINS center of measurements to the GPS
along axis 2 of the illustration
• LV3 is the signed distance from the ROVINS center of measurements to the GPS
along axis 3 of the illustration
Step 5:
Step 6:
Step 4:
Choose INPUTS under INSTALLATION Menu
Associate GPS to INPUT A by clicking in the intersec-
tion of the INPUT A column and GPS row
Configure the relevant parameters of the INPUT A by
choosing them in the various drop-down lists of the
Protocol, Physical Link, Serial and/or Ethernet areas.
Step 2:
Step 3:
Step 1:

26 2010-05/MU/ROVINS-001-B 27
2010-05/MU/ROVINS-001-B
CONFIGURING THE PPS FOR USING TIME SYNCHRONIZATION SYSTEM
Choose INPUTS under INSTALLATION Menu
Click OK to validate and save your choices.
Associate UTC to INPUT A by clicking in the intersection
of the INPUT A column and UTC row
• For an Ethernet link, the pulse input will come from
pulse input B: choose Ethernet for the Physical Link then
select Pulse B for Synchro In and the desired protocol
• For a serial link, the pulse input will come from pulse
input A: choose Serial for the Physical Link then select
Pulse A for Synchro In and the desired protocol.
Step 1:
Step 4:
Step 2:
Step 3:
Choose OUTPUTS under INSTALLATION Menu
Click on Output A.
Choose «GPS like» in the Protocol list
Select the Physical Link and configure its
parameters if needed.
Click OK to validate and save your
choices.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
CONFIGURING THE OUTPUT STREAM

28 2010-05/MU/ROVINS-001-B 29
2010-05/MU/ROVINS-001-B
ENTERING THE INITIAL POSITION
To define the position :
Choose INIT&UPDATE under SETUP Menu
Enter the initial position:
• Either Latitude (in degrees), Longitude (in degrees) and
depth (in meters)
Click OK to validate and save your choices.
Step 1:
Step 2:
Step 3:
Step 4:
Entering the initial position is only necessary if no GPS is available upon starting ROVINS. Once saved by clicking on
OK button, the entered position is used at next ROVINS start.
• or the UTM coodinates of this position
• Click options menu
In the Coordinate System area :
• Either select Latitude/longitude option
• Or UTM option
• Click OK button to validate

30 2010-05/MU/ROVINS-001-B 31
2010-05/MU/ROVINS-001-B
MORE…
The previous steps consist only of the basic configuration of your ROVINS system. You will find hereafter a list of other
possible configurations. Details on these configurations can be found in the ROVINS User Guide.
ROVINS TO VEHICLE MISALIGNMENT
ROVINS measures heading and attitude with respect to its reference frame defined by the 3 axes X1, X2 and X3 (see Figure
1). ROVINS reference frame may not be parallel to the vehicle reference frame. In such case, heading and attitude outputs
can be compensated for angular misalignments of ROVINS relative to the vehicle reference frame so that ROVINS outputs
heading and attitude of the vehicle.
This is done by setting misalignment bias for the three reference axis. These biases are the Euler angles which relate
ROVINS and vehicle reference frame. Vehicle reference frame is depicted on Figure 2.
Figure 2 - Vehicle Reference Frame
For more details about the misalignment bias, refer to Part 2 of the ROVINS User Guide.
STEP 4. NAVIGATING WITH ROVINS
As soon as ROVINS is powered on, it starts its alignment phase with the manually input position stored into ROVINS
PROM.
• During the first five minutes after powering-on, ROVINS performs its coarse alignment: ROVINS inertial sensor data
(accelerometers and gyrometers) are computed to estimate heading, roll and pitch angles. At sea it is recommended
that the system is kept as steady as possible during coarse alignment: oscillations around a mean position are
permitted but accelerations should be avoided. Leaving the vessel adrift for 5 minutes would lead to satisfactory
conditions for coarse alignment.
• After the first fine minutes long coarse alignment phase, ROVINS switches to the “fine alignment” phase to improve
the accuracy of roll, pitch and heading estimations. Such improved accuracy is useful if data from external sensors are
not available right at the beginning of the mission. Any movement is allowed during the fine alignment. 90 degrees
rotations are even recommended so that the Kalman filter assesses the sensors bias on different axes. The fine
alignment is ended automatically by ROVINS when the heading covariance is below 0.1degree.
• At the end of the fine alignment process, ROVINS is ready for navigation with optimal performances.
Heading &
Attitude Invalid output Reliable output Full accuracy output
Position = Position given by the
GPS Reliable output Full accuracy output
Flag in the System
status area Alignement Fine Alignement System ready
Navigation = Static or
max speed
< 3 knot
Navigation with large
heading variations
(>90°)
When heading standard
deviation <0.1 Time in minutes
0 5

32 2010-05/MU/ROVINS-001-B 33
2010-05/MU/ROVINS-001-B
ROVINS is able to calculate the heave of several external monitoring point: one primary and three secondary monitoring
points can be user-configured. The secondary lever arms are used to compute the heave for the output protocols that
provide it (see Part IV- Configuration and Operation of the ROVINS User Guide to define the secondary lever arms), the
output position being always given for the Primary lever arm..
External monitoring points are defined by their “Lever Arm” to ROVINS center of measurement P. This lever arm is the
triplet of cartesian coordinates (LV1, LV2, LV3) defining the position of external monitoring point M with respect to ROVINS
center of measurement P (defined in Figure 1) in the vessel reference frame (XV1, XV2, XV3) - see Figure 3.
Figure 3 - Definition of lever arms
For more details about the external monitoring points, refer to Part 2 of the ROVINS User Guide.
CONFIGURING THE OUTPUT STREAM
ROVINS uses external sensor data to improve its own estimates of position, speed, attitude and, heading. In order
to prevent corrupted external data to degrade the estimation of ROVINS, external sensor data passe through a
rejection filter before being incorporate into ROVINS main computation Kalman filter.
The following external sensors can be added:
• A DVL
• A LBL
• An USBL (up to three beacons)
• A CTD
• A depth sensor
For more details about the external sensors, refer to part 4 of the ROVINS User GUIDE
ETHERNET INPUT/OUTPUT
Five Ethernet inputs/outputs are available on ROVINS.
For more details about
• The Ethernet connector, refer to Part 2 of the ROVINS User Guide
• The available protocols for this connectors, refer to part 5 of the ROVINS User Guide.
PULSE INPUT/OUTPUT
Four pulse inputs and two external pulse coming from the central connector are available on ROVINS.
For more details about the pulse connector pins, refer to Part 2 of the ROVINS User Guide.
EXTENDED FUNCTIONS OF THE WEB-BASED USER INTERFACE
Recording data: you can record the data coming from the repeater port or of any of the A to E output. For more details
about the data recording refer to Part 4 of the ROVINS User Guide.
Observing the input data flow coming from any input stream. For more details refer to Part 4 of ROVINS User Guide.
System Information: to accede to the serial number and firmware version of your ROVINS unit, click on maintenance
menu of the WEB-based User Interface.
Note: these information are useful when you contact IXSEA technical support.
CONFIGURING THE OUTPUT STREAM

34 2010-05/MU/ROVINS-001-B 35
2010-05/MU/ROVINS-001-B
ROVINS ZERO VELOCITY UPDATE (ZUPT) MODES
These modes have been designed to use ROVINS for specific applications when no external sensor is connected.
For more details about ZUPT mode, refer to part 4 of the ROVINS User Guide.
CUSTOMER SUPPORT
THE WORLDWIDE 24/7 TELEPHONE SUPPORT LINE NUMBERS ARE:
EMEA [phone]
USA [phone] (toll free)
ASIA [phone]
To contact customer support for any IXSEA products, a general mail box is available with the following address:
[e-mail]
[

36 2010-05/MU/ROVINS-001-B 37
2010-05/MU/ROVINS-001-B
IXSEA CONTACT
To obtain information on any IXSEA products, a general mail box is available with the following address:
[e-mail]
You can also contact IXSEA headquarters in France, or one of its representatives around the
Contact Phone Fax
IXSEA SAS
France
[phone] [phone]
IXSEA BV
The Netherlands
[phone] [phone]
IXSEA GmbH
Germany
[phone] [phone]
IXSEA Ltd - Main office
IXSEA Ltd - Aberdeen office
United Kingdom
+ 44 1730 260222
+ 44 1224 355160
[phone]
IXSEA LLC
United Arab Emirates
[phone] [phone]
IXSEA Inc
Usa
[phone] [phone]
IXSEA Pte Ltd
Singapore
[phone] [phone]
IXSEA Pte Ltd
China
[phone] [phone]
IXSEA Pty Ltd
Australia
[phone] [phone]
PERSONAL NOTES