J.Burrows JBPDMARMWE User manual

JBPDMARMWE
JBPDMARMBK
1 Carton
1/15
PROFESSIONAL DUAL MONITOR ARM
For spare parts or hardware call 1300 OFFICE
ASSEMBLY INSTRUCTIONS

Officeworks Ltd. 236-262 East Boundary Road Bentleigh East VIC 3165 AUSTRALIA
2/15
Customer Service Contact Details
General Advice
Spare Parts & Hardware
1300 OFFICE
People Required

3/15
CHILDREN MUST BE SUPERVISED.
NOTE
CAUTION
WARNING
DANGER
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
Please check you have all hardware before assembling.
If you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws and knobs are firmly secured.
Check that all bolts, screws and knobs are securely tightened at least every 4 months.
If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.

1
1pc
2
1pc
34
4pcs 1pc
56
1pc 1pc
7
1pc M8*120mm 1pc M8*65mm
1pc
1pc
8
910
1pc
4/15
Parts List

CD
3pcs M6*12mm screw 16pcs Ø6.5*Ø13*2 washer
E F
1pc M6 Box wrench 1pc 4X4 Allen key
G
1pc 5x5 Allen key
A
8pcs M4*12mm screw
B
8pcs M5*12mm screw
5/15
Included Hardware

1
4
3
2
5
1
6
7
8
9
10
4
6/15
Choose proper grommet screw based on thickness of desk:
M8*65mm for desk thickness: < 18mm
M8*120mm for desk thickness: 18-100mm
7
Option A: Clamp version, go to step 1 Option B: Grommet version, go to step 4
Installation Diagram

Step 1
F
1pcs 4X4 Allen key
C
3pcs M6*12mm screw
1
3
2
C
C
C
7/15
Assembly
Option A: Clamp

8/15
4
2
3
For desk thickness:
25-100mm
Select position
according to
thickness of the desk
Tighten
Step 2
Step 3

1
6
7
C
X
F
C
4
9/15
1pcs 4X4 Allen key
3pcs M6*12mm screw
7
1pc M8*120mm 1pc M8*65mm
Choose proper grommet screw(7)
based on thickness of desk:
M8*65mm for desk thickness: < 18mm
M8*120mm for desk thickness: 18-100mm
Option B: Grommet
Step 4
Step 5

8
9
10
100
75
100
75
Compatible with the monitor hole distance
75x75 or 100x100
75x75 or
100x100
10/15
Tighten
Available hole size:
8.5-25mm
VESA ON MONITOR
Step 6
Step 7

3
21
A or B
A or B
D
A or B
D
G
G
1pc 5x5 Allen key
D
16pcs Ø6.5*Ø13*2 washer
A
8pcs M4*12mm screw
B
8pcs M5*12mm screw
11/15
Attaching the monitor to the plate
Use washer
if needed (D)
Step 8

G
1pc 5x5 Allen key
E
1pc M6 Box wrench
12/15
Use Allen Key (G) to adjust the
swivel function on position 1
Remove the plastic cover, use box
wrench (E) to adjust the tilt function
on position 2
Adjust the monitor
Step 9a
E
G
11
2

G
G
G
13 /15
Adjust the monitor G
1pc 5x5 Allen key
Step 9b
Monitor must be on the arm
Arm must be in mount
CAUTION
If the monitor is lighter than 4-5 kg, the arm drifts upward.
Insert Allen Key (G), turn the tension screw clockwise (-).
If the monitor is heavier than 4-5 kg, the arm drifts
downwards.
Insert Allen Key (G), turn the adjustment screw
counter-clockwise (+).
Adjusting arm to monitor weight
Weight tension is pre-set at 4-5 kg.
If the monitor weighs more or less than that,
press the arm down to a position parallel
with the desk prior to adjusting the weight.
-
+

Using cord management
14/15
Cable
Step 10

10"~30"
75x75
100x100 2-9kg
-85
15
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
15/15
CAUTION: This product is intended to hold the maximum weight indicated.
Exceeding the maximum weight will result in instability and may cause injury.