Jägermeister SHOTMEISTER User manual

SHOTMEISTER
OWNER’S MANUAL

2
Thank you for purchasing the Jägermeister®Shotmeister
REGISTRATION INFORMATION
Register your Jägermeister®Shotmeister online at:
www.tapmachine.com
PLEASE MAKE SURE TO REGISTER YOUR machine
AND RETAIN YOUR ORIGINAL BOX AND PACKING
MATERIALS. FAILURE TO DO SO MAY CAUSE
DELAYS IF YOU REQUIRE WARRANTY SERVICE.
NOTE: THIS machine COMES WITH A 1 YEAR
LIMITED WARRANTY. THESE MATERIALS WILL BE
NEEDED FOR SHIPPING IF YOUR FREEZER NEEDS
TO BE RETURNED FOR SERVICE OR REPAIR.
Please visit www.tapmachine.com for more informaon on warranty,
repair and returns and for an online version of this owner’s manual.
Do not return your freezer unless you receive authorizaon
to do so by Tap Machine Inc.
To receive a return material authorizaon (RMA) number,
call: 1–800–713–8881 or email: [e-mail]
Freezers returned to Tap Machine Inc., Mast-Jägermeister US., or our
aliated warehouses, without a specied return material authorizaon
number will be refused and returned to sender.
This manual is provided with each new Jägermeister®Shotmeister and
contains important informaon to keep your freezer running problem free.
This manual is also available online at www.tapmachine.com.
DRINK RESPONSIBLY
Jägermeister is the registered trademark of Mast-Jägermeister SE.
Jägermeister Shotmeister manufactured and sold under license exclusively
by Tap Machine Inc. Jägermeister® Liqueur, 35% Alc./Vol.,
Imported by Mast-Jägermeister US, Inc., White Plains, NY. Made in China.

3
Model
Dimensions
Power Required
Current Draw
Electrical Cord
Compressor
Refrigerant / Charge Size
Temperature Range
Capacity of Cooling Tank
Required Clearances
Operang Environment
Jägermeister®Shotmeister
10" W x 17.5" D x 16.5" H
110V–120VAC / 60Hz
3A at start / 1.7A steady
6 Ft.
1/10P
R134A / 42g
Factory set at: 14˚to -8˚F
370ml
100mm (Approximately 4 inches)
For Indoor Use Only
Between 50˚F (10˚C) and 90˚F (32˚C)
Get to know your
Jägermeister® Shotmeister
Operation Information
General: The Jägermeister®Shotmeister is a unique display, refrigeraon
and delivery system designed to chill and dispense Jägermeister Herbal
Liqueur at temperatures well below freezing 32˚F (0˚C).
The Jägermeister® Shotmeister is designed to hold only 750ml or 1.0L
Jägermeister boles. DO NOT ATTEMPT TO USE BOTTLES LARGER
THAN 1.0 LITERS.
Carton Contents
The following are packaged with the freezer:
(1) Drip tray, (2) Bole stoppers, (1) Owner’s manual
To purchase other accessories,
please visit
www.tapmachine.com

4
INSTRUCTIONS
Unpacking and Start-Up Instructions
1. Start by removing the included bag of bole stoppers and drip tray
2. Remove foam inserts to reveal the machine
3. Carefully remove the machine by liing it straight up out of the box
DO NOT HOLD THE SHOTMEISTER BY THE FRONT FAUCET!
4. Place the machine in desired locaon with 4 inches of clearance on all sides
5. REMOVE PAPER PADDING from tap spout and inner chilling chamber
6. Before plugging in, make sure the power switch in the back is in the
OFF posion
7. Plug in, and ip the switch to ON
8. Insert drip tray in the lower front side of the machine
Inserting a bottle
1. It is recommended that you place a pre-chilled bole into the Shotmeister
2. Unscrew the bole cap (picture A) and replace it with a bole stopper
(picture B) screwing it on ghtly
3. Turn the bole upside down into the chilling chamber (picture C)
with the bole stopper engaging the well (picture D)
4. Bole is inserted correctly when the Jägermeister begins to drain from
the bole into the machine
5. When closing the lid, make sure to PRESS DOWN FIRMLY and ensure
the lid is completely sealed
A B C D

5
Pouring Shots from your
Shotmeister Machine
When pouring ice cold shots from your Jägermeister Shotmeister, pull
the tap handle towards you. When done pouring, push the tap handle
back to the center posion, ensuring the valve is closed.
Note: If the tap handle is not completely vercal, Jägermeister may
connue to ow from the tap in a slow stream.
Cleaning Instructions
1. Turn o machine and remove the bole
2. Drain remaining Jägermeister liqueur from the machine
3. Fill empty Jägermeister bole with warm water, install a bole
stopper, and insert into machine
4. Pull on tap handle and drain out all warm water from bole
5. Repeat step 4 unl the water exing the machine is clear
6. Remove drip tray and p machine towards you, raising the back a few
inches, pulling the tap handle to ensure all water has drained from
the machine
7. Make sure to clean all used bole stoppers
Note: Cleaning should take place aer machine has not been used
for an extended period of me, or once every 6 months.
RETAIN YOUR ORIGINAL BOX AND PACKING
MATERIALS FOR A PERIOD OF 1 YEAR.
THESE ITEMS ARE NEEDED IF YOUR FREEZER
REQUIRES SERVICE OR REPAIRS.
For informaon on requesng service or repairs, visit:
www.tapmachine.com
In Case of Frost
It is normal for frost to appear in the freezer. To remove the layer
of frost, simply turn o the freezer and let it sit while the frost melts.
The frost will automacally drain out of the freezer. It is recommended you
place a towel under the freezer in case of seepage.
It is normal to experience a layer of frost up to 1/8"inch thick.
ALWAYS CHECK TO MAKE SURE THE LID IS CLOSED FIRMLY

6
NOTICE
The Jägermeister®Shotmeister is not intended
for use by persons with reduced physical, sensory or mental
capabilies, or lack of experience and knowledge, unless they
have been given supervision or instrucon concerning
the use of the Jägermeister® Shotmeister by a person responsible
for their safety.
Children should not operate the Jägermeister®
Shotmeister in any instance.
The Shotmeister’s intended use is to dispense Jägermeister
Herbal Liqueur and should be operated in accordance with
the laws and regulaons of the locaon in which such use
takes place.
When seng up your new Jägermeister Shotmeister,
place it on a level surface, indoors, with 4 inches of space
on all sides to allow for adequate airow from
the refrigeraon system.
DO NOT PLACE machine ON AN ANGLE.
FAILURE TO PROVIDE ADEQUATE CLEARANCE
AROUND THE MACHINE WILL RESULT IN
IMPROPER CHILLING OR POSSIBLE DAMAGE
TO INTERNAL COMPONENTS.
IMPORTANT!

7
WARNING
DO NOT introduce water or other uids with a freezing
temperature above -10˚F while the POWER switch
is in the ON posion.
Failure to do so may result in the unit freezing,
causing internal damage.
DANGER
ELECTRICAL SHOCK HAZARD
Can cause injury or death. Service should only be performed
by qualied service personnel. Before aempng to perform
ANY maintenance, UNPLUG unit. Use extreme care during
electrical circuit tests. Live circuits may be exposed.
THERE ARE NO USER REPLACEABLE PARTS OR
USER ADJUSTMENTS INSIDE THE machine.
IF THE POWER CORD IS DAMAGED IT MUST BE
REPLACED BY THE MANUFACTURER, AUTHORIZED
SERVICE AGENT, OR SIMILARLY QUALIFIED
PERSONS TO AVOID A HAZARD.
WARNINGS
AND IMPORTANT NOTICES