JACLOC WALL KIOSK LPS-90-W User manual

Install Guide
Floor
Kiosk

designed to
command
attention and
invite interaction
THE JACLOC FLOOR KIOSK IS
32

What’s in
the box?
Face Plate Access Cover Case Stem
2x Keys
Fit Kit
4x Bolts 1x Mounting Washer
Please Note: If you purchased any of our upgrade options, those additional parts are not listed above.
Mounting
Washer
Long
Bolts
Short
Bolts
Empty
Case
Stem with
Switch option
xed together
Stem
A.
Attach the Switch to
the Stem.
B.
You can now attach the Case to
the Stem.
PLEASE NOTE: This is an optional upgrade. Please complete A and B below, then proceed to Step 2.
If you have not purchased this option, please proceed to assemble your kiosk starting at Step 1.
Switch Optional Upgrade:
Landscape to Portrait
Switch
LPS-90-W (WHITE) | LPS-90-B (BLACK)
4 5

Mounting
Washer
Mounting
Washer
Bolts Bolts
Empty
Case
Empty
Case
Fixed
Stem
Tilt
Stem
STEP 2 FIT KIT
Attach the Case to the Stem by using the four bolts and the mounting washer to join together.
Fixed Stem Tilt Stem
STEP 1 CASE TO STEM
Fit Kit
Corner Pieces
Key
Lock
Positioning
Pins
Firmly insert each of the four Fit Kit rubber corner pieces into the case by aligning with the Positioning Pins.
6 7

STEP 3 INSERT TABLET
Connect the charge cable to the tablet, then insert your tablet into the Fit Kit corner pieces. It should sit neat and snug.
STEP 4 ACCESS COVER
Key
Lock
Tablet
Charge
Cable
First, peel the brown protective seal from one side of the Access Cover. Then insert the Access Cover over the top of your
tablet with the black, shiny side facing up. It should t precisely, allowing user access to your tablet home button and
front camera (options available for any combination of Open and Closed; home button and front camera).
Access
Cover on
top
Tablet sits
underneath
8 9

STEP 5 ATTACH THE FACEPLATE
STEP 6 PUSH TO LOCK
Face PlateKey Lock Fixing
Hooks
Example:
The last step is to lock-down the stainless steel Face Plate to secure and protect your tablet. First, position the
two Fixing Hooks into the Case (opposite side of the Key Lock). Then pop in the other end. The Faceplate should
click into the Case and sit ush.
To secure your kiosk, push
in the lock-pin
When the lock-pin stands out, it
means your kiosk is open
To complete the setup of your kiosk and ensure your device is secure, make sure to push in the lock-pin. To
unlock use the 2 keys provided. More keys can be purchased from our website.
10 11

FIXED BASE
FREESTANDING BASE
STEP 1
Connect the Base Freestanding to the Stem using
the four bolts provided, tightening from underneath.
STEP 1
Connect the Base Fixed to the
Stem using the four bolts provided,
tightening from underneath.
STEP 2
Secure the Base Fixed to your
surface using the four screws.
STEP 3
Complete.
STEP 2
Complete.
Base Fixed 4x Screws 4x Bolts Base Freestanding4x Bolts
BOX INCLUSIONS FSB002-W (WHITE) | FSB002-B (BLACK) BOX INCLUSIONS MTB002-W (WHITE) | MTB002-B (BLACK)
12 13

For further
information
& support
Email
[email protected]om.au
Phone
1800 077 375
Distribution Centre
34 Thompson Street,
Bowen Hills, QLD 4006
Also available...
Wall Kiosks
From $158
Desk Kiosks
From $172
14 15

Enjoy your
Jacloc Kiosk
www.jacloc.com.au