User Login
Products Purchase Support Contact Us
J-Bridge
Bridge + firewall Quick Start Guide
Defaults for Jade Networks products,
IP : 10.0.100.1, Password : jade
or
Connect a monitor and a keyboard to the device and boot device in
"Reset to defaults" mode and follow the instruction on screen.
Installation process
place J-Bridge device between 2 switches like so. This is the most
common way of installation.
Note : Change the default password as soon as possible.
Minimal requirement for all Jade's software. Windows 2k and up.
Install J-Bridge.exe on your windows computer, follow on screen
installation instructions.
Configs via J-Bridge.exe
Connect the your device, click menu/Tools/Change IP address.
Changing the IP address
click menu/Bridge Config/IP config
Changing the Password
click menu/Tools/Change Password
Adding firewall rules
No worry, if entering a rule that will block you from having access
to the device. J-Bridge needs a confirmation to accept the rule. If
for any reason, new rule blocks access, J-Bridge will revert to the
latest working configurations within a minute, giving you back
access to the device.
Products Support Contact Us Stay Tuned
Bandwidth controler(JTC)
Bridge+Firewall
Spam Filter
Router+Nat(Gateway)
Device On Demand
Barbwire Firewall
Upcoming
By email
Info
Sales and Quotes
Resellers
Device On Demand
Press
Technical assistance
Jade Networks
253 5e Rue de la Pointe
Shawinigan, Quebec
Canada G9N-1E2
CDN / USA : 1 855 588 3360
World Wide Contacts
Facebook
Twitter
