Jaxpety Sandinrayli TY91G0276 User manual

USER’S MANUAL
CONTENT
BRIEF INTRODUCTION.............................................................................................01-02
IMPORTANT SAFETY PRECAUTIONS.....................................................................03-05
ASSEMBLY INSTRUCTIONS.....................................................................................06-08
EXERCISE GUIDE.....................................................................................................08--09
OPERATION INSTRUCTIONS....................................................................................09-13
MAINTENANCE INSTRUCTIONS..............................................................................14-15

1
BRIEF INTRODUCTION
(all parts are indicated in the diagram)
Digital Meter
Safety Key
Handrail
Right Column
Left Column
Motor Upper Cover
Motor Bottom Cover
Running Belt
Edge Bar
Body Frame
Right Rear Corner Guard
Left Rear Corner Guard

2
ATTENTION:
1.Please definitely read the guide for operations carefully before assembly. If anything
goes wrong during the assembly process, please contact us for customer service.
2.Please be aware that the return of the treadmill is not available in case of product failure
due to improper or forced assembly!
3.The main commodity and its accessories are required together with the original package
intact when the return is reasonable.Otherwise it must be paid at the price if the damage is
caused by human factors or there are components missing (the outer packing or the spare
parts).
4.In order to ensure your safety, please do not transport or move the treadmill when it’s
operating lest your fingers or body be clipped and injured.And we are not responsible for
injuries or accidents due to improper use.
PACKING LIST
Sequence
number
Parts’ name Quantity
1
main frame
(columns,running
platform,digital meter)
1 set
2 accessories 1 set
Accessory List
Dϴdžϭϲ ,ĂůĨ ƌŽƵŶĚ ŚĞdž ďŽůƚ Ϯ ƉĐƐ DϴΎϯϱ ,ĂůĨ ƌŽƵŶĚ ŚĞdž ďŽůƚ ϰƉĐƐ A manual
P ůůĞŶ ǁƌĞŶĐŚ P ůůĞŶ ǁƌĞŶĐŚ ^ĐƌĞǁ ĚƌŝǀĞƌ ϭƉĐƐ
^ĂĨĞƚLJ ŬĞLJ ůŽĐŬ Žŝů ďŽƚƚůĞ DƉϯ ůŝŶĞ

3
TECH SPECS
working voltage AC110V~50Hz
maximum safety weight load 100kg
overall dimension 1270mm*570mm*1070mm
motor peak power 2.0 HP
effective area 1050mm*383mm
continuous output 500W
function walk/run
Protection Level Against Electric Shock 1 Class
PLEASE READ ALL THE INSTRUCTIONS IN THE MANUAL CAREFULLY BEFORE ASSEMBLY AND
USE.
PLEASE KEEP THIS GUIDE BOOK FOR FUTURE REFERENCE.
PLEASE BE AWARE THAT THE APPEARANCE,COLOR AND SURFACE PATTERN OF OUR
PORDUCTS SHALL BE BASED ON THE ACTUAL WITH CONTINUOUS UPDATING WITHOUT
PRIOR NOTICE.
IMPORTANT SAFETY PRECAUTIONS
ATTENTION: PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE AND PAY
ATTENTION TO PRECAUTIONS BELOW.
1.This treadmill is only for home use avoiding being affected with damp. Do not splash water or stack
heavy objects on it.
2.Please wear suitable sportswear and sports shoes. Never ever exercise on the treadmill with bare feet
or stretch yourself all over on it.
3.The power plug must be reliably grounded, and the socket should have an exclusive circuit so as to
avoid being interfered with other electrical appliances.
4.Keep children away from the machine to avoid accidental injury.
5.Refrain from overuse at heavy load and long time,otherwise it would cause motor and controller
damage, or speeds up the wear and aging of the bearing, the running belt and the running plate. Please
carry out regular maintenance.
6.Please reduce the dust, retain certain air-humidity of your room and avoid producing strong static,
otherwise it may interfere with the operation of the electronic meter and the controller.
7.Please turn off the power after use.
8.Please keep adequate ventilation when you use the treadmill.
9.Please stop immediately and consult doctors if you don’t feel well or anything unusual occurs.
10.The silicone oil must be stored after use in a place that children can not get so as to prevent them
from eating it by mistake, which could lead to serious consequences.

4
WARNING: IN ORDER TO REDUCE ACCIDENTS AND INJURIES, PLEASE
OBSERVE THE FOLLOWING RULES.
1.Please check if your garment is buttoned or zipped before using the treadmill.
2.Please wear appropriate clothes that would not be easily hooked or caught in the treadmill.
3.Make sure the power cord is far away from hot objects.
4.Keep children or pets away from the treadmill during operation.
5.Position the treadmill on clear, flat floor instead of tilted surfaces. Do not place the treadmill on thick
carpet as it may interfere with proper ventilation. Also, do not place the treadmill outdoors or near water.
6.Cut off the power before moving or transporting.
7.No one is allowed to disassemble the treadmill without authorization, which may lead to severe
consequences. Please turn to specialized persons if anything goes wrong.
8.The treadmill is merely adapted in circuits of 20 amps.
9.The treadmill is only for one person to exercise each time.
10.If you get dizzy, chest pain, nausea or short of breath during exercise, please stop immediately and
consult your fitness instructor or go to doctor in time.
WARNING! IMPERATIVE!
People who are under medical treatment or have one of the following
symptoms must consult with their specialists before use!
(1)suffering from pain in the waist or were injured in the legs, waist or neck at the past; numbness of legs,
waist, neck and hands(with persistent problems such as herniated disk, spinal slip and cervical herniation
and etc.)
(2)deform-able arthritis, rheumatism, gout
(3)osteoporosis abnormalities
(4)circulatory disorders (heart disease, vascular disorders, hypertension, etc.)
(5)respiratory disorders
(6)using artificial heart rate adjusters and implantable medical electronics
(7)malignant neoplasm
(8)Used to have symptoms such as a blood circulation disorder or a variety of skin infections, such as a
thrombus or a severe aneurysm, an acute hematoma, etc.
(9)sensory impairment caused by high peripheral circulation disorders such as diabetes
(10)skin trauma
(11)high fever due to illness,etc.(38°or higher)
(12)an abnormal dorsal bone or a curved dorsal bone
(13)be pregnant or likely to be pregnant or is in a menstrual period
(14)feeling physically abnormal and needing rest
(15)apparently in poor health
(16)with rehabilitation purposes
(17)In addition to the above,people who feel physically abnormal.---(may cause accidents or poor
physical conditions)
(18)In course of exercise if you feel waist pain, legs and feet numbness, dizziness, heartbeat and any
other abnormal pain or dis-coordination, please stop instantly and consult doctors.
(19)Children should be under adult’s supervision if they need to exercise on the treadmill---otherwise
there would be a risk of injury.

5
(20)Please don’t forget to confirm whether there are people and pets (back,bottom, front)or not during
operation and when you load and take out the product.
PROHIBITON!
1.Do not use the product if the housing is cracked and shed (internal structure leaks) or there are welding
parts fell off---otherwise you may get injured by accident.
2.Do not jump up and down when the conveyor belt is moving---it could get you tripped over and injured.
3.Do not use or preserve this product in damp places near the bathroom or where there will be water
drops dripping.
4.Never expose the product in circumstances with direct sunshine and keep away from objects at high
temperature like stoves and electric heating carpet---or it could lead to electric leakage or fire.
5.Do not use the treadmill if the power cord or plug damaged, or the socket loose---it may result in
electric shock, short circuit and fire.
6.Do not damage or forcibly bend or twist the power cord or even lay heavy objects on it, and never make
the line caught---it would increase the risk for electric shock or fire.
7.Not suitable for two or more people at the same time and don’t let others approach---they will probably
get tripped over and injured.
8.Not for people who have problems in expressing themselves or operating the product alone---could be
in danger.
9.Always keep away from water!
10.Do not drench the main part or the operating console with water or drink.
11.People who don’t usually do sports should not abruptly do intense exercise.
12.Never ever exercise just after meals or when you feel tired in physically abnormal condition---may be
harmful to your health.
13.This product is designed for domestic use but not crowded sites such as schools, gymnasiums and
etc.
14.Don’t use it while having foods or doing other activities simultaneously.
15.Keep the power plug clean and do not plug in or out with hands wet.
16.Plug out the power cord when you are not using the machine---the dust and moisture would degrade
the insulation, leading to electric leakage or fire.
17.Do not use the treadmill after drinking alcohol and becoming unresponsive.
18.Don’t exercise with hard objects in your pants pocket.
GROUNDING METHOD
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
This treadmill is equipped with a cord having an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER –Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is

6
properly grounded. Do not modify the plug provided with the product –if it does not fit the outlet, please
find a proper outlet installed by a qualified electrician. Please make sure that the product is connected to
an outlet having the same shape and configuration as the plug. And no change-over adapter socket is
approved.
ASSEMBLY INTRUCTIONS
1.Open the packing carton, take out all the spare parts and place the main frame of the treadmill flat on
the floor.
2.Lift up the columns and fix to the main frame by two M8*16 screws;the fixture position and order are
referred to number 1 and 2 in the diagrammatic sketch;the columns should not be tightened until the
bracket which is used to support the digital meter is installed and fixed.
3.Fold the bracket supporting the digital meter and fix it to the columns with two knobs tightened. The
position is referred to number 1 and 2 in the diagrammatic sketch.

7
4.Place the security key at the correct position and connect it to the digital meter. Once the installation is
done, this treadmill could be plugged in and start on.

8
EXERCISE GUIDE
WARM-UP
5 to 10 minute warm-up is required before exercise on the treadmill.
BREATH
Do not hold your breath while exercising. Generally we recommend inspiration by nose and expiration by
mouth in accordance with your movements. Please cease your exercise instantly when you are too short
of breath.
FREQUENCY
The same part of the muscle need at least
means you should exercise every other day.
TRAINING LOAD
a 48-hour rest, which
The
you
initial training
could raise
load rests with training
it according to the
state individually.And
progressive training
principle.Muscle soreness could be a normal phenomenon at the
beginning of your training cycle,which would fade gradually along
with the exercise process.
MEAL ARRANGEMENT
In order to protect the digestive system, please assure neither to
exercise until one hour later after meals nor to eat until at least
half
you
an hour after exercise.
can in the meanwhile
You’d better drink as less water as
ofso as not to increase the burden
heart and kidney.
WARM-UP EXERCISE
It could be better to warm up and make your muscle more flexible
by walking for 5-10 minutes regardless of the speed you would

9
like to run on.Then stop to do stretch exercise for 5 times as the methods shown below,10 seconds or
more for both feet each time, and do it again after running.
Reach Down
Knees slightly bent and body slowly bent forward, back and shoulders relax, trying to touch toes. Keep
10-15 seconds and relax. Repeat 3 times(picture 1).
Hamstrings Stretches
Sitting on a clean cushion, put one leg straight, the other inward and close to the inside of the straight leg.
Try to touch your toes with your hands. Keeping for 10 to 15 seconds, and relax. Repeat 3 times for each
leg (picture 2).
Crus and Feet Tendon Stretches
Standing with two hands on the wall or tree, one leg behind. Keeping your legs straight and the heel on
the ground, tilt to the wall or tree. Keep 10 to 15 seconds, and relax. Repeat 3 times for each leg (picture
3).
Quadriceps Stretches
Keeping your balance with your left hand holding on the wall or table, then stretch your right heel toward
your buttocks slowly, until you feel very tense in the front of your thigh. Keep10 to 15 seconds, and relax.
Repeat 3 times for each leg (picture 4).
Sartorius (Inner Muscles of Thigh）Stretches
Sitting down with your soles opposite and knees outward Pull your feet toward your groin Keep 10 to 15
seconds and relax. Repeat 3 times (picture 5).
OPERATION INSTRUCTIONS
1. DISPLAY WINDOW

10
1) ‘SPEED’ DISPLAY
This display area could show the speed of running belt when the treadmill is in operation, ranging from
1~8 km/h, and the number signal of a countdown from 3 to 1 when the running is starting.
2) ‘TIME’ DISPLAY
This display area could show forward timing (from 0:00 to 99:59) which will be reset at 99:59 and the
countdown from the set time to zero. Then the treadmill will smoothly stop when the countdown is
finished, and transfers to standby.
3) ‘DIS.’ DISPLAY
This display area could show the running distance which will be counted forward from 0.0 to 99.9 and be
reset when it’s over 99.9. The distance countdown will start at the set distance and descends to zero.
Then the treadmill will smoothly stop when the countdown is finished, and transfers to standby.
4) ‘CAL’ DISPLAY
This display area could show the calories consumed, forward from 000 to 990 and countdown from the
set number to zero. The number will be reset if it’s over 990. When the countdown is finished the treadmill
will smoothly stop when the countdown is finished, and transfers to standby.
2. BUTTON FUNCTION
1) ‘PROG’ is the button which you could press and choose different built-in programs from P01 to P12 in
the standby state.
2) ‘MODE’ is the button which you could press and choose various modes including ‘15:00’, ‘1.0’, ‘50.0’
(‘15:00’ refers to time countdown mode; ‘1.0’ refers to running distance countdown mode; ‘50.0’ refers to
calories countdown mode).
The relevant numerical value of all countdown modes can be turned up and down. You can press
‘START’ and start your exercise with all parameters set.
3).’START’ is the key to start on the treadmill any time as long as the power is on and the safety key is
correctly sucked and gripped.
4).’STOP’ is the key to make a pause and reset the treadmill.
5).’+、-’ are the buttons to adjust the parameters in the standby state and adjust the speed when the
treadmill is operating.
And each press could make a difference of 0.1km on the speed. If you press the button more than 1
second, the speed would be automatically accelerated or slowed down continuously.
3. QUICK START (MANUAL MODE)
1) Turn the power on and make sure the magnetic safety key is correctly sucked and gripped to the
security lock under the control panel.
2) Press ‘START’ and the system would begin to count down for 3 seconds with prompt sounds.
Meanwhile the ‘SPEED’ DISPLAY will show the countdown number and the treadmill will start on at the
speed of ‘1’ when the countdown is over.
3) ‘+’ and ‘-’ could be used to adjust the running speed during operation.

11
4. MANUAL MODE
1)Directly press ‘START’ in the standby state and the treadmill will start operating at the speed of ‘1’.
Other indicators will count forward from zero and you could press ‘+’ and ‘-’ to change the speed.
2)Press ‘MODE’ to enter into time countdown mode and ‘TIME’ DISPLAY will flash showing ‘15:00’. Press
‘+’ and ‘-’ to set your running time, ranging from ‘5:00’ to ‘99:00’.
3)Press ‘MODE’ in the time countdown mode to enter into running distance countdown mode with ‘DIS’
DISPLAY flashing and showing ‘0.8’. Press ‘+’ and ‘-’ to set your running distance, ranging from ‘0.5’ to
‘99.9’.
4)Press ‘MODE’ in the running distance countdown mode to enter into consumed calories countdown
mode with ‘CAL’ DISPLAY flashing and showing ‘50.0’. Press ‘+’ and ‘-’ to set your running distance,
ranging from ‘10.0’ to ‘990’.
5)The treadmill will start operating 3 seconds later after you choose one of the three countdown modes
and press ‘START’. Press ‘+’ and ‘-’ to adjust the speed if needed. Press ‘STOP’ and the treadmill will
come to a pause.
5. BUILT-IN PROGRAMS
The system has a total of 12 built-in programs P01-P12. In the standby state, press ‘PROG’, the program
window will show ‘P01’ and ‘ TIME’ DISPLAY will flicker displaying preset time ‘30:00’. You can choose
the program you like and press ‘+’ and ‘-’ to set the required exercise time, and then press "START" to
validate the built-in program. The built-in programs are divided into 10 segments, each segment of the
exercise time equals the set time/10. When entering the next segment, the system would have 3 prompt
sounds like ‘Bi-Bi-Bi-’. The speed changes with the program segments shifted, during which you can
press ‘+’ and ‘-’ to adjust the speed. However, the speed will be restored to the speed of the next segment
with the program shift. At the end of the program, there will be 3 prompt sounds like ‘Bi-Bi-Bi-’ and the
treadmill will steadily slow down and stop completely transferring to the standby state.
6. ENERGY-SAVING MODE
The standby state would automatically transfer to the energy-saving mode with a black display screen if
there aren’t any operations in 10 minutes. You could press any buttons to enter into the standby state.
7. PROGRAMS NOTES
Each built-in program would divide the exercise time into 10 equal segments, and every one of the
segments has its corresponding speed.
Time
Segments
Programs
The set time/10=The time of each segment
1
2
3
4
5
6
7
8
9
10
P1
SPE
ED
3
3
6
5
5
4
4
4
4
3
P2
SPE
ED
3
3
4
4
5
5
5
6
6
4
P3
SPE
ED
2
4
6
6
3
4
5
2
3
2

12
8. DISPLAY VALUE RANGE
Parameters
Initial Value
Default Value
Setting Range
Indication Range
Time(min.&sec.)
0:00
15:00
5:00~99:00
0:00~99:59
Speed(km/h)
1
1
1~8
1~8
Distance(km)
0.00
1.00
0.5~99.9
0.0~99.9
Heart Rate(beat)
---
---
---
---
Calories(KCAL)
0.0
50.0
10.0~990
0.0~990
Gradient(section)
---
---
---
---
9. SAFETY LOCK
At any state, pulling off the SAFETY KEY can stop the running of the treadmill urgently with the SPEED
DISPLAY showing "E07". The treadmill would not respond to any other operations except shutdown. And
it will resume the standby state in the case of the safety lock reloaded correctly, waiting for input
instructions.
P4
SPE
ED
3
3
5
6
4
4
5
4
3
2
P5
SPE
ED
3
6
6
6
2
2
4
3
2
1
P6
SPE
ED
2
6
5
4
3
3
5
4
3
2
P7
SPE
ED
2
5
5
4
4
6
5
3
2
2
P8
SPE
ED
2
4
4
4
5
6
4
3
3
1
P9
SPE
ED
2
4
5
5
6
5
6
3
3
2
P10
SPE
ED
2
5
3
5
4
6
5
2
4
3
P11
SPE
ED
2
5
6
6
4
3
2
5
3
2
P12
SPE
ED
2
3
5
6
5
6
4
6
5
3

13
ERROR CODES
Fault
Cod
e
Fault
Description
Fault Processing
E1
Communicatio
n anomaly: the
communication
anomaly
between the
under control
and the digital
meter
Potential reasons:
The communication is blocked, please check each connection
point from the digital meter to the under control and change the
broken lines.
E2
Motor not
detected
Potential reasons:
1.Please check the motor power line and reconnect it or replace
if needed.
2.The motor could be damaged, please check and replace it if
needed.
E5
Electric
overload
protection:
Continuous
direct current
of the motor
over 6A for
more than 3s is
detected by the
under control
when
operating.
Potential reasons:
1. Over load results in excessive current or some parts are
stuck and the motor could not operate normally.
2. Check the motor and replace it if needed.
3. Check the controller. If there’s burnt smell, please replace it.
4. Check the specifications of the power supply. If it’s not
compliant with the standard, please replace it with correct
power supply.
E6
Protection
against current
explosion:
The motor
circuit is
damaged by
voltage
anomaly or
motor anomaly.
Potential reasons:
1. Check the voltage. If it’s not enough for normal operation,
please use correct power supply and try it again.
2. Check the controller. If there’s peculiar smell, please
replace the controller.
3. Check the motor line. If it’s not well connected, please fix it.
E7
Safety lock falls
off.
Connect the safety lock to the right position and make sure it
will not fall off easily again.

14
MAINTENANCE INSTRUCTIONS
LUBRICATION
After running tape is used for a period of time, it must be lubricated with special methyl-silicone
oil.
1.Recommendations for Lubrication Frequency:
The Running Time
Lubrication Frequency
less than 3 hours each week
once for every 5 months
4-7 hours each week
once for every 2 months
over 7 hours each week
once each month
(Excessive lubrication is forbidden.)
Notice:
Reasonable lubrication is effective for expanding the service life of the treadmill.
2. Lubrication Method
How to confirm if the treadmill needs more lubricant?
Grab and lift the running belt and reach out your hand as close as possible to the center of the backside
of the running belt. If the running board is dry and the belt doesn't feel damp, you need to add lubricant.
Run the belt at the speed of 1KM/H in order to evenly apply the silicone grease and tap the running belt
from left to right for a few minutes so as to make sure the silicone grease fully absorbed by the running
belt.
3.Running Belt’s Elasticity Adjustment
The running belt has already been adjusted in the factory but could still become loose and slip at the
driving rod after a period time of use. Please synchronously turn the bolts on both sides of the running
belt clockwise at a half circle each time. Be careful and do not over-tighten the belt in case raising the
load of motor or spoil the motor, the running belt and the rotating rod.
4.Off-track Deviation
Possible Reasons:
1.The treadmill is placed on surface not horizontal.
2.The user's feet are not in the center of the running belt when exercising.

15
3.Uneven exertion of user's feet.
Usually a few minutes of non-load running could fix the problem. If the deviation can not be automatically
recovered, please use the attached 5#/6# inner hexagonal wrenches to turn the belt gradually, at a
quarter circle as a unit.
The deviation could severely damage the running belt, which is beyond the scope of warranty and must
be repaired in time by the user following the instructions.
Please adjust the left bolt clockwise or adjust the right bolt counterclockwise if it’s left deviation.And
implement the contrary measures if it’s right deviation.
5.Driving Belt Adjustment
Note: The grooves of the driving belt and the wheels
should be cleaned regularly.
6.Slip or Intermittent Pause
Open the front motor cover, turn on the treadmill.Hold on to
the handrail and pedal your feet against the running belt checking the condition of the running belt and
the transmission belt (the motor). Please fix and adjust either one with pauses.
This guide book is for reference only. Please be aware the products shall be based on the actual
without prior notice if there’s some change on the actual!