JBL Authentics L 16 User manual

®
bvHARMAN
Wi-Fi
setup
Authentics L
16
There are five ways
to
connect
JBL
Authentics
to
your
Wi-
Fi
router for the first time setup.
The three
most
common
are shown below. For more options consult the owner's manual online at
www
.j
bl.com.
I
Setup
by
APP
1.
Download the
JBL
Music app to help you easily join
your Wi-
Fi
network.
~
~ ~
'
••
-f
..
••
i.-
•
~
'\
~
c~;8~~
.·
P.I~i
.
.
.
'-
:.•
2.
Find
"+
"
in
the dashboard, then press it for a step by
step guide.
I
For
iOS
user
Wi-Fi Sharing with Cable
1.
Connect your
iPhone,
iPad
oriPod touch
to
the top
USB
port
using
the
USB
to 30-pin or
USB
to Ughtning cable
that
is
provided with your iPhone,
iPad
or iPod touch.
q
~
2.
Ensure your iPhone, iPad or iPod touch
is
connected
to your Wi-Fi network.
3.
Switch the Authentics to the AirPlay input by pressing
the source button.
~
~
4.
Press
the Source button
on
the JBLAuthentics for more
than 3 seconds.
The
Airplay
LED
will
quick
flash
twice.
5. A pop up window
will
be
displayed
on
your iPad, iPhone
or iPod touch with the question "Share
Wi-Fi
Settings?"
6.
Press Allow. The phone will then transfer settings and
the Authentics will attempt
to
join your wireless
network. This could take up to 1 minute.
Once the JBL Authentics
is
connected to the network,
the Wi-Fi
LED
will be constant White.
I
Android
or
Mac/PC
setup
1. Power on JBL Authentics and wait for about 1 minute.
Then switch source
to
DLNA mode by pressing
source button.
2.
Long press the source button for 3 seconds and then
release, the DLNA
LED
will quick flash twice.
3.
Use your computer or phone/tablet to search for a
Wi-Fi Network called "JBL_L
16_WF>OO<"
on the Wi-Fi
list (this might take about 30 seconds} and connect
it.
Once connected successfully, the DLNA
LED
will stop
flashing.
Harman
NTI
A.-
MU!iil.
lf*'A·'
JBMZ
_
MCHP
NTI CHANNEL11
NTI_CHANNEL6
Soundwave5
Tenda
TPUnk
_
SW
4.
Open the web browser on your computer or
phone/tablet, and
in
the address
bar,
type
"192.168.1.1" and press enter.
You
should see the
JBL
Authentics setup page.
5.
Choose the Wi-Fi network you want to join, enter the
password and click "Save
".
Choose Your Network
r--
5eb.4))'CU'"pro0:Jctto)onyax~ofcholce..Ueelhe
drcpdaWnbo.xto...-cclhenetworkyouwant)'CU'"deMoetooonnectto
6.
JBL Authentics will then attempt to connect to your
Wi-Fi Network
(the
LED
shall
flash during the
connecting process). Once connected successfully, the
LED
will stop flashing and
an
audio tone
will
be
heard.
Connect your computerorphone/ tablet tothe same Wi-Fi
network
as
Authentics and enjoy your music
wirelessly.

IMPORTANT SAFETY INSTRUCTIONS
II.
FOR ALL PRODUCTS: CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THE LIGHTNING FLASH WITH AN
ARROWHEAD SYMBOL, WITHIN AN
EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
UNINSULATED "DANGEROUS VOLTAGE"
WITHIN THE PRODUCT'S ENCLOSURE THAT
MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK
TO PERSONS.
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
FCC AND IC STATEMENT FOR
USERS (USA AND CANADA
ONLY)
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
{1) This device may not cause harmful
interference, and
{2) this device must accept any
interference received, including interference that
may cause undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numerique de
Ia classe B est
conforme a
Ia norme NMB-003 du Canada.
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference
in a
residential installation. This equipment generates,
uses and
can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there
is no
guarantee that interference will not occur
in a
bvHARMAN
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user
is encouraged
to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
anten~a.
• Increase the separation between the equipment
and
receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or
an experienced radio/TV
technician for help.
Caution: Changes or modifications not expressly
approved by HARMAN could void the user's
authority to operate the equipment.
FOR PRODUCTS THAT TRANSMIT RF
ENERGY:
FCC AND IC INFORMATION FOR USERS
This device complies with Part 15 of the FCC
rules and Industry Canada license-exempt RSS
210. Operation is subject to the following two
conditions:
{1) This device may not cause harmful
interference; and
{2) this device must accept any
interference received, including interference that
may cause undesired operation.
FCC/IC Radiation Exposure Statement
This equipment complies with FCC/IC RSS-
102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should
be installed and operated with minimum distance
20cm between the radiator &your body.
FOR PRODUCTS WITH RADIO
RECEIVERS THAT CAN USE
AN EXTERNAL ANTENNA (USA
ONLY):
CATV (CABLE TV) OR ANTENNA
GROUNDING
If an outside antenna orcable system is connected
to this product, be certain that
it is grounded so as
to provide some protection against voltage surges
and static charges. Section 810 of the National
Electrical Code
{NEC), ANSI/NFPA No. 70·1984,
provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to
an antenna
discharge unit,
size of grounding conductors,
location of antenna discharge unit, connection
to grounding electrodes and requirements of the
grounding electrode.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV {cable
TV) system installer's attention to article 820-40
of the
NEC, which provides guidelines for proper
grounding and,
in particular, specifies that the
cable ground
shall be connected tothe grounding
system of the building,
as close to the point of
cable entry
as possible.
IMPORTANT SAFETY INSTRUCTIONS
II.
FOR CD/DVD/BLU-RAY DISC™
PLAYERS:
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION: This product uses a laser system. To
prevent direct exposure to the laser beam, do not
open the cabinet enclosure or defeat any of the
safety mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM. To
ensure proper use of this product, please read
the owner's manual carefully and retain it for
future
use. Should the unit require maintenance
or
repair, please contact your local JBL service
center. Refer servicing to qualified personnel only.
FOR ALL EU COUNTRIES:
FOR PRODUCTS THAT INCLUDE AUDIO
OUT
Prevention
of hearing loss
CAUTION: Permanent hearing loss may occur
if earphones or headphones are used at high
volume for prolonged periods of time.
For
France, the products have been tested to
complywiththe Sound Pressure
Level requirement
laid down in the applicable NF EN50332-1 :2000
and/or EN50332-2:2003 standards
as required
by French Article L.5232-1 .
~
Note: To prevent possible hearing damage, do not
listen at high volume levels for long periods.
WEEENOnCE
The Directive on Waste Electrical and Electronic
Equipment
{WEEE), which entered into force as
European law on 13th February 2003, resulted
in a major change in the treatment of electrical
equipment at end-of-life.
The purpose of this Directive
is, as a first priority,
the prevention of
WEEE, and in addition, to
promote the
reuse, recycling and other forms of
recovery of such wastes
so as to reduce disposal.
The
WEEE logo on the product or on its box
indicating collection for electrical and electronic
equipment consists of the crossed-out wheeled
bin, as shown below.
-
This product must not be disposed of or dumped
with your other household waste.
You are liable
to dispose of
all your electronic or electrical
waste equipment by relocating over to the
specified collection point for recycling of such
hazardous waste. Isolated collection and proper
recovery of your electronic and electrical waste
equipment at the time of disposal
will allow us
to help conserving natural resources. Moreover,
proper recycling of the electronic and electrical
waste equipment
will ensure safety of human
health and environment. For more information
about electronic and electrical waste equipment
disposal, recovery, and collection points, please
contact your local city center, household waste
disposal service, shop from where you purchased
the equipment, or manufacturer of the equipment.
ROHS COMPLIANCE
This product is in compliance with Directive
2011 /65/EU of the European Parliament and
of the Council of 8 June
2011 on the restriction
of the use of certain hazardous substances
in
electrical and electronic equipment.
FOR PRODUCTS THAT INCLUDE
BATTERIES
EU Batteries Directive 2006/66/EC
A new battery directive 2006/66/EC on Battery
and Accumulator replacing directive entered
into force
on the 26th September 2008. The
directive applies to
all types of batteries and
accumulators
{AA, AAA, button cells, lead acid,
rechargeable packs) including those incorporated
into appliances except for
military, medical and
power tool applications.
The directive sets out rules for collection,
treatment, recycling and disposal ofbatteries, and
aims to prohibit certain hazardous substances
and to improve environmental performance of
batteries and
all operators in the supply chain.
Instructions for Users on Removal,
Recycling and Disposal of Used Batteries
To remove the batteries from your equipment
or remote control, reverse the procedure
described
in the owner's manual for inserting
batteries.
For products with a built
-in battery that lasts for
the lifetime of the product, removal may not be
possible for the
user. In this case, recycling or
recovery centers handle the dismantling of the
product and the removal of the battery.
If, for any
reason,
it becomes necessary to replace such
a battery, this procedure must be performed
by
authorized service centers.
-HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2012 HARMAN International Industries, Incorporated. All rights reserved.
bvHARMAN
In the European Union and other locations, it is
illegal to dispose of any battery with household
trash.
All batteries must be disposed of in an
environmentally sound manner. Contact your
local waste-management officials for information
regarding the environmentally sound collection,
recycling and disposal of used batteries.
WARNING: Danger of explosion if battery is
incorrectly replaced. To reduce risk of fire or
burns, don't disassemble, crush, puncture,
short external contacts, expose to temperature
above 60°C
{140°F), or dispose of in fire or water.
Replace only with specified batteries.
The symbol indicating 'separate collection' for all
batteries and accumulators shall be the crossed-
out wheeled bin shown below:
In case of batteries, accumulators and button
cells containing more than 0.0005 % mercury,
more than 0.002 % cadmium or more than
0.004 % lead,
shall be marked with the chemical
symbol for the metal concerned: Hg, Cd or
Pb
respectively. Please Refer to the below symbol:
Hg Cd Pb
FOR ALL PRODUCTS EXCEPT THOSE
WITH WIRELESS OPERATION:
HARMAN International hereby declares that
this equipment
is in compliance with the EMC
2004/108/EC Directive, LVD 2006/95/ECDirective,
ErP 2009/125/EC Directive and RoHS 2011/65/
EU Directive. The declaration ofconformity may be
consulted
in the support section of our Web site,
accessible from www.jbl.com.
FOR ALL PRODUCTS WITH WIRELESS
OPERATION:
HARMAN International hereby declares that this
equipment
is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC,
ErP 2009/125/EC
Directive and RoHS
2011 /65/EU Directive The
declaration of conformity may be consulted
in the
support section of our Web site, accessible from
www.jbl.com.
JBL
is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Blu-ray Disc
is a trademark of the Blu-ray Disc Association.
Features, specifications and appearance
are subject to change without notice. www.jbl.com