ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance 81
• Max Amp Power 80 watts*
• Frequency Response 38Hz – 20kHz (–10dB)
• Sensitivity 88dB (2.83V @ 1 meter)
• Crossover Frequency 2,800Hz
SYSTEM COMPONENTS:
• Grille 590-0263
• Low-Frequency Transducer 6-1/2" (165mm) titanium-lami-
nate cone w/rubber surround
(590-0348)
DC Resistance 5.9 ohms
• High-Frequency Transducer 1" (25mm) titanium-laminate
dome, w/swivel mount
(590-0278)
DC Resistance 7.9 ohms ±10%
• Crossover Network 590-0281
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test 6.0V Input 35Hz to 20kHz
• L.F. Aural Sweep Test 5.0V Input 35Hz to 3kHz
• H.F. Aural Sweep Test 2.83V Input 2kHz to 20kHz
PHYSICAL SPECIFICATIONS:
• Plate Size (W x H) 8-1/2" x 11" (216mm x 297mm)
• Mounting Cutout
Size (W x H) 7-1/8" x 9-11/16"
(181mm x 246mm)
• Mounting Depth 3-7/8" (98mm)
• Weight 10 lb (4.5kg) Sold in pairs
WARRANTY:
• Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
Technical Manual
SP6II SoundPoint®Series
SP6II SoundPoint Series
