Jenn-Air JJW2427D User instructions

JENN-AIR®DETAILED PLANNING DIMENSIONS 1 of 5
8614AdZw915
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
27" SINGLE WALL OVEN
JJW2427D – 27" x 297⁄8" x 255⁄16"
MODEL # JJW2427D
in cm
A
Overall width
Euro-Style Stainless 27 68.6
Floating Glass 2615⁄16 68.4
BHeight of control panel 51⁄214.0
CSpace between control panel
and door
7⁄16 1.1
DHeight to top of handle 217⁄16 54.4
EHeight of door 221⁄856.2
FHeight of trim 111⁄16 4.3
GOverall height 297⁄875.8
HWidth of recessed oven 257⁄16 64.6
IWidth of conduit channel 21⁄26.4
JDepth of recessed oven 231⁄858.7
KDepth with door 245⁄16 61.8
LDepth with handle 255⁄16 64.3
MDepth with door fully open 453⁄8115.3
PRODUCT DIMENSIONSPRODUCT DIMENSIONS
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
A
I
J
E
F
H
Power Supply Location
D
C
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
A
I
J
E
F
H
Power Supply Location
D
C
FRONT VIEW
TOP VIEW

JENN-AIR®DETAILED PLANNING DIMENSIONS 2 of 5
8614AdZw915
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
27" SINGLE WALL OVEN
JJW2427D – 27" x 297⁄8" x 255⁄16"
MODEL # JJW2427D
in cm
AHeight to top of handle 223⁄457.8
BHeight of trim extending
below cutout 111⁄16 4.3
CHeight from top of recessed
oven to top of control panel 215⁄16 7.4
D
Height from bottom of
recessed oven foot to bottom
of oven vent
3⁄16 0.5
EHeight of recessed oven 263⁄467.9
FHeight to top of control panel 297⁄875.8
GDepth with door fully open 453⁄8115.3
HDepth with handle 255⁄16 64.3
IDepth with door 245⁄16 61.8
JDepth of recessed oven 231⁄858.7
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
A
I
J
E
F
H
Power Supply Location
D
C
DIMENSIONS AS INSTALLED
SIDE VIEW

JENN-AIR®DETAILED PLANNING DIMENSIONS 3 of 5
8614AdZw915
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
27" SINGLE WALL OVEN
JJW2427D – 27" x 297⁄8" x 255⁄16"
MODEL # JJW2427D
in cm
AWidth of cabinet (min.) 27 68.6
BWidth of cutout 251⁄264.8
C* Height of cutout
(recommended) 28 71.2
DTop of cutout to bottom
of upper cabinet door (min.) 23⁄16 5.5
EBottom of cutout to top
of lower cabinet door (min.) 11⁄23.8
FBottom of cutout to floor 32 81.3
GDepth of cutout (min.) 24 61.0
HTop of countertop to bottom
of cutout (min.) 313⁄879.7
ITop of cutout to underside of
countertop (min.) 25⁄86.7
JBottom of cutout to floor (min.) 37⁄89.8
eRecommended junction box location
*Will fit cutout height from 2615⁄16" (68.4 cm) to 297⁄16" (74.8 cm).
FRONT VIEW SIDE VIEW
g g
A
B
C*
A
B
C*
G
G
ee
ee
A
B
C
e e
E
D
DD
F
E
F
E
F
B
C*
ee
J
AI
H
g g
A
B
C*
A
B
C*
G
G
ee
ee
A
B
C
e e
E
D
DD
F
E
F
E
F
B
C*
ee
J
AI
H
OPENING/CLEARANCE DIMENSIONS
ELECTRICAL REQUIREMENTS
240 volt, 20-amp fused, grounded circuit is required. A dedicated
circuit is required.
The length of conduit provided is for serviceability. Do not cut
the conduit. The junction box should be located 3" (7.6 cm)
maximum below the support surface. Drill a 1" (2.5 cm) minimum
diameter hole in the right rear or left rear corner of the support
surface for access to the junction box.
NOTE: For under counter installation, the junction box should be
located in the adjacent right or left cabinet. Drill a 1" (2.5 cm)
minimum diameter hole in an upper corner of the side wall for
access to the junction box.
UNDER COUNTER INSTALLATION
(without cooktop installed above)
BACK VIEW
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
A
I
J
E
F
H
Power Supply Location
D
C
g g
A
B
C*
A
B
C*
G
G
ee
ee
A
B
C
e e
E
D
DD
F
E
F
E
F
B
C*
ee
J
AI
H

JENN-AIR®DETAILED PLANNING DIMENSIONS 4 of 5
8614AdZw915
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
27" SINGLE WALL OVEN – FLUSH INSTALLATION
JJW2427D – 27" x 297⁄8" x 245⁄16" (depth without handle)
MODEL # JJW2427D
in cm
AWidth of flush inset cutout
(min.) 271⁄469.2
BWidth of opening (min.) 257⁄865.7
CHeight of flush inset cutout
(min.) 307⁄16 77.3
DHeight of opening (min.) 2911⁄16 75.4
EBottom of cutout to floor 45⁄8-
32
11.7-
81.3
FDepth of cutout (min.) 25 63.5
GBottom of cutout to floor for
under counter installation 41⁄16 10.3
eRecommended junction box location
OPENING/CLEARANCE DIMENSIONS
ELECTRICAL REQUIREMENTS
240 volt, 20-amp fused, grounded circuit is required. A dedicated
circuit is required.
The length of conduit provided is for serviceability. Do not cut
the conduit. The junction box should be located 3" (7.6 cm)
maximum below the support surface. Drill a 1" (3.4 cm) minimum
diameter hole in tthe right rear or left rear corner of the support
surface for access to the junction box.
NOTE: For under counter installation, the junction box should be
located in the adjacent right or left cabinet. Drill a 1" (2.5 cm)
minimum diameter hole in an upper corner of the side wall for
access to the junction box.
FLUSH INSTALLATION REQUIREMENTS
A 25" (63.5 cm) minimum cutout depth is required.
These dimensions will result in a 1⁄4" (0.6 cm) reveal on the top,
a 1⁄4" (0.6 cm) reveal on the sides and a 1⁄8" (0.3 cm) reveal on
the bottom of the wall oven.
The front face of the cleats and spacers will be visible and
should be treated as a finished surface.
CABINET REQUIREMENTS
NOTE: When using under counter installation, check cabinet
manufacturer’s specifications to verify fit.
FRONT VIEW SIDE VIEW
e e
ee
G
A
B
3/4" (1.9 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16" (1.7 cm)
Side Cleat*
A
E
B
A
B
C
D
F
F
ee
e
E
3/4" (1.9 cm)
Top Cleat*
11/16 " (1.7 cm)
Side Cleat*
F
Side Cleat*
13/8" (3.5 cm)
Side Cleat*
34" (1.9
cm) Side
34" (1.9
cm) Side
E
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
234" (7.0
cm) Top
112" (3.8 cm)
Platform*
D
C
11/16 " (1.7 cm)
Side Cleat*
Power Supply Location
A
B
5/8" (1.6 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16 " (1.7 cm)
Side Cleat*
e e
ee
G
A
B
3/4" (1.9 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16" (1.7 cm)
Side Cleat*
A
E
B
A
B
C
D
F
F
ee
e
E
3/4" (1.9 cm)
Top Cleat*
11/16 " (1.7 cm)
Side Cleat*
F
Side Cleat*
13/8" (3.5 cm)
Side Cleat*
34" (1.9
cm) Side
34" (1.9
cm) Side
E
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
234" (7.0
cm) Top
112" (3.8 cm)
Platform*
D
C
11/16 " (1.7 cm)
Side Cleat*
Power Supply Location
A
B
5/8" (1.6 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16 " (1.7 cm)
Side Cleat*
UNDER COUNTER INSTALLATION
(without cooktop installed above)
BACK VIEW
A
D
E
B C
F
G
H
A
J
K
L
M
I I
B
G
A
I
J
E
F
H
Power Supply Location
D
C
e e
ee
G
A
B
3/4" (1.9 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16" (1.7 cm)
Side Cleat*
A
E
B
A
B
C
D
F
F
ee
e
E
3/4" (1.9 cm)
Top Cleat*
11/16 " (1.7 cm)
Side Cleat*
F
Side Cleat*
13/8" (3.5 cm)
Side Cleat*
34" (1.9
cm) Side
34" (1.9
cm) Side
E
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
234" (7.0
cm) Top
112" (3.8 cm)
Platform*
D
C
11/16 " (1.7 cm)
Side Cleat*
Power Supply Location
A
B
5/8" (1.6 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16 " (1.7 cm)
Side Cleat*
e e
ee
G
A
B
3/4" (1.9 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16" (1.7 cm)
Side Cleat*
A
E
B
A
B
C
D
F
F
ee
e
E
3/4" (1.9 cm)
Top Cleat*
11/16 " (1.7 cm)
Side Cleat*
F
Side Cleat*
13/8" (3.5 cm)
Side Cleat*
34" (1.9
cm) Side
34" (1.9
cm) Side
E
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
234" (7.0
cm) Top
112" (3.8 cm)
Platform*
D
C
11/16 " (1.7 cm)
Side Cleat*
Power Supply Location
A
B
5/8" (1.6 cm)
Top Cleat*
11/16" (1.7 cm)
Side Cleat*
1/2" x 2" (1.3 x 5.1 cm)
Spacer (entire depth
of cutout)
D
C
11/16 " (1.7 cm)
Side Cleat*
TOP VIEW
*Cleats and spacers must be recessed 13⁄8(3.5 cm) from the front of the cabinet.

JENN-AIR®DETAILED PLANNING DIMENSIONS 5 of 5
8614AdZw915
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
SINGLE WALL OVEN AND COOKTOP COMBINATIONS
For the approved model number combinations, refer to the under counter label
located on top of the oven chassis and on the bottom of the cooktop burner box.
NOTE: For under counter installation, the junction box should be located in the
adjacent right or left cabinet. Drill a 1" (2.5 cm) minimum diameter hole in an upper
corner of the side wall for access to the junction box.
CABINET REQUIREMENTS
NOTE: When using under counter installation, check cabinet manufacturer’s
specifications to verify fit.
g g
Plinth
Additional Cabinet Side
12" (1.3 cm)
Plywood
412" (11.4 cm)
Toe Kick
Plinth
12" (1.3 cm)
Plywood
412" (11.4 cm)
Toe Kick
Flush Install
Cabinet Side
B
D
ee
F
E
G
A
H
C
34" (1.9
cm) Side
34" (1.9
cm) Side
2" (5.1 cm)
Top Cleat
B
F
ee
G
A
E
I
I
C C
H
gg
D
SIDE VIEW –
UNDER COUNTER INSTALLATION
(with cooktop installed above)
OPENING/CLEARANCE DIMENSIONS
FRONT VIEW –
UNDER COUNTER INSTALLATION
(with cooktop installed above)
MODEL #
JJW3430D
JJW2430D JJW2427D
in cm in cm
AWidth of cabinet (min.) 30 76.2 27 68.6
BWidth of cutout
(recommended) 281⁄272.4 251⁄264.8
COven trim overlap 5⁄81.6 5⁄81.6
DTop of countertop to floor 36 91.4 36 91.4
E
Top of countertop to bottom
of cutout
Induction cooktop
combination 313⁄879.7 313⁄879.7
Gas cooktop combination 313⁄879.7 313⁄879.7
Electric cooktop
combination 313⁄879.7 313⁄879.7
FHeight of cutout
(recommended) 273⁄470.5 273⁄470.5
G
Bottom of cutout to floor
Induction cooktop
combination 45⁄811.7 45⁄811.7
Gas cooktop combination 45⁄811.7 45⁄811.7
Electric cooktop
combination 45⁄811.7 45⁄811.7
HDepth of cabinet (min.) 24 61.0 24 61.0
eRecommended junction box location
gRecommended gas supply line location for gas cooktop
NOTE: For under counter installation, the junction box should be located in the
adjacent right or left cabinet. Drill a 1" (2.5 cm) minimum diameter hole in an upper
corner of the side wall for access to the junction box.
g g
Plinth
Additional Cabinet Side
12" (1.3 cm)
Plywood
412" (11.4 cm)
Toe Kick
Plinth
12" (1.3 cm)
Plywood
412" (11.4 cm)
Toe Kick
Flush Install
Cabinet Side
B
D
ee
F
E
G
A
H
C
34" (1.9
cm) Side
34" (1.9
cm) Side
2" (5.1 cm)
Top Cleat
B
F
ee
G
A
E
I
I
C C
H
gg
D
CABINET REQUIREMENTS
NOTE: When using under counter installation, check cabinet manufacturer’s
specifications to verify fit.
APPROVED MODEL NUMBER COMBINATIONS
SINGLE WALL OVENS
30-Inch: JJW3430D, JJW2430D
27-Inch: JJW2427D
INDUCTION COOKTOPS
36-Inch: JIC4536X
30-Inch: JIC4430X
GAS COOKTOPS
36-Inch: JGC2536EB
30-Inch: JGC2530EB
ELECTRIC COOKTOPS
36-Inch: JEC4536B, JEC3536B
30-Inch: JEC4430B, JEC3430B