Jensen JEP-775 User manual



MODEL: JEP-775
USER MANUAL


WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified
may result in hazardous radiation exposeure.
CAUTION
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN

5V/3A
16 17 18
20 21 22
2319
123456
78910 11
12 13 14
15

!
5V/3A
4.



INDEPENDENT

TURNING

5V/3A

CARE AND MAINTENANCE
RESETTING THE UNIT
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
If the unit experiences a power surge or electric shock, it is possible that the internal
micro-controller may lock up and the unit will not respond to any commands from the top panel
controls. In this event, press and hold the EMERGENCY LIGHT (#11) BUTTON for 10 seconds
until display shows reset message “rESEt” and then release the button.
The reset operation clears the system memory and all of your previous settings will be erased.