Jensen VM9312HD - DVD Player With LCD Monitor User manual

VM9312HD
Installation and Operation Manual
, [_]l_]eJDD[
=JDDDD[
;~T--IDDDE
-'---IJ DDD
EEBE
IDDD[
___ DDD[
DDD[
BBBE
rBBE
&o[
DDO[
~!DD[
. 100[
!§§~
OO[
OO[
IIOOOO[
[
__ :ODOO[
Watts Peak

~ VM9312HD
CONTENTS
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to
use all the features of your new Jensen VM9312HD Mobile Multimedia Receiver for maximum
enjoyment.
Preparation 1
Installation 2
Controls and Indicators 6
Remote Control 8
Using the TFT Monitor 11
Operating Instructions 13
Setup Menu 14
Tuner Operation 16
Satellite Radio Operation 18
DVDIVCD Video Operation 20
DVD/CD Audio Operation 23
MP3IWMA Operation 24
iPod Operation 26
Troubleshooting 27
Specifications 30

~ VM9312HD
PREPARATION
Congratulations on your purchase of the Jensen VM9312HD
Mobile Multimedia Receiver.
It's agood idea
to read all of the instructions before beginning
the installation. We recommend having your Jensen
VM9312HD installed
by areputable installation shop.
Features
DVDAspect Ratio -Full and Normal
Fast Forward -2X, 4X, 8X and 32X
Slow Motion -1/2, 1/4, 1/6 and 1/7
Play, Pause, Stop, Next Chapter and Previous Chapter
CDIMP31WMA
CD-Text Compatible
ID3
Tag Compatible
Directory Search (MP31
VIlMA Only)
Direct Track Access via Remote Control
Burn up to 1500 MP3 and
VIlMA Files onto aDVD+R I
RW
Audible Forward IReverse Track Search (CD-DA Only)
Random, Repeat and Intro
Play, Pause, Stop, Next Track and Previous Track
Tuner
HD Radio Tuner'
USA IEurope Frequency Spacing
24 Station Presets (18
FM I6AM)
Auto Stereo IMono
Auto Store
RBDS -Radio Broadcast Data System
Sat Radio Ready
Compatible with XM and Sirius Tuners (Sold Separately)
Requires XMDJEN1 00
or JXMC Cables (Sold
Separately)
Satellite Channel Name, Artist, Song and Categories
Displayed
On TFT Screen
jLinkDirect
High Speed Direct Connect Interface to Access iPod
Playlists, Artists, Albums, Songs,
"Photos and "Video
(** Requires Photo or Video iPod)
Intuitive Interface for easy iPod Navigation
Power Management charges iPod while connected
Requires jLinkCable (Sold Separately)
MediaLink
'. Under dash Interface allows Portable Media Devices to
be connected
MediaLink1 includes the following connectivity:
jLinkDirect 8-pin DIN for iPod
3.5mm audio only Input
RCA Audio IVideo Input
Chassis
1.0 DIN (Import IISO-DIN Mountable)
Motorized Flip-Out IFlip-Up LCD Screen
8Character ISegment Type Secondary LCD Display
7" TFT Active Matrix LCD wI Anti-Glare Coating
336,960 Sub Pixels (1440W X234H)
Pixel Pitch -0.321W X0.370H
Screen Tilt IAngle Adjustment
Beep
Tone Confirmation (On-OFF Option)
Heat Management System -Forced Air Cooling to keep
the chip sets operating at nominal temperatures
General
44-Key Infrared Remote Control
Two Composite Video Outputs for Additional Screens
Two Audio IVideo Auxiliary Inputs for Game Console,
Camcorder, Navigation, etc.
Three-Band
Tone control (Bass, Mid and Treble) wI
Eight Preset EO Curves
Front, Rear and Subwoofer Line Output
Subwoofer Phase Control - 0 - 180 degrees
Programmable Volume Control
Rear Camera Input (Normal and Mirror Image View)
Touch Screen Calibration Mode
100-0hm Preamp Line Output -All Audio Channels
2VRMS Line Output -All Channels
Rotary Encoder Audio Control
5-way Joystick
Optional Accessories
jLinkCable -iPod interface Cable
'HD Radio 1M Technology Manufactured Under License From
iBiquity Digital Corporation. U.S. and Foreign Patents. HD
Radio
1M and the HD Radio logo are proprietary trademarks of
iBiquity Digital Corp.
1
WARNING! Only connect the unit to a12·volt power
supply with proper grounding.
WARNING!
Never install this unit where operation and
viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of atrafflc accident (except
when
using for rear view video camera) never use the
video
display function while driving the vehicle. This is a
violation of federal law.
WARNING!
Never disassemble or adjust the unit.
WARNING!
To prevent injury from shock or fire, never
expose this unit to moisture or water.
WARNING! Neveruse
irregular discs.
WARNING!
To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
WARNING!
Using an improper fuse may cause damage
to the unit and result in afire.
WARNING! The
monitor employsan automatic motorized
mechanism. To prevent damage to the core mechanism,
please do
not push, pull or swivel the monitor manually.

VM9312HD ~
INSTALLATION
What's in the Box
1. Cosmetic trim ring
2. \Niring hamess power/speaker
3. Mounting hardware for VM9312HD
4. Single DIN sleeve
5. HD Radio Module
6. HD Radio Module connecting DIN cable
7. Remote Control
8. Parking brake sensor extension wire
9. Media Link Module
10. Mounting hardware for HD Radio Module
11. Owners Manual
12. Quick Start Guide
Tools and Supplies
You will need these tools and supplies to install your
VM9312HD:
Torx type, flat-head and Philips screwdrivers
\Nire cutters and strippers
Tools to remove existing radio (screwdriver, socket
wrench set or other tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 -18 gauge speaker wire
Disconnecting the Battery
To prevent ashort circuit, be sure to turn offthe ignition and
remove the negative (-) battery cable prior to installation.
NOTE: "the VM9312HD is to be installed in a car
equipped with an on-board drive or navigation computer,
do not disconnect the battery cable. "the cable is
disconnected, the
computer memory may be lost. Under
these conditions, use extra caution during Installation to
avoid causing a short circuit.
Pre-installation
1. Press the metal levers on both sides to remove the half-
sleeve from the radio.
PREPARE RADIO
2. Install the half-sleeve.
a. Install adapter if necessary (optional).
b. Install half-sleeve into adapter or dashboard (use
only the supplied screws). Do not force the sleeve
into the opening or cause it to bend or bow.
c. Locate the series of bend-tabs along the top,
bottom and sides of the mounting sleeve. \Nith the
sleeve fully inserted into the dashboard opening,
bend as many of the tabs outward as necessary so
that the sleeve is firmly secured to the dashboard.
2
d. Install support strap to make the unit more stable.
INSTALL HALF SLEEVE
CAUTIONI Be careful not to damage the car wiring.
3. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.
Wiring
Complete wiring as illustrated in the wiring diagram on page
3. Once the wiring is complete, reconnect the battery
negative terminal. Ifthere is no ACC available, connect the
ACC lead to the power supply with aswitch.
NOTE: When replacing afuse, be sure to use correct
type and amperage to avoid damaging the radio. The
VM9312HD uses one 15 amp mini-ATMfuse, located in
the black filter box in-line with the main wire harness.
Final Installation
After completing the wiring connections, turn the unit on to
confirm operation (ignition switch must be on). Ifunit does not
operate, recheck all wiring until problem is corrected. Once
proper operation is achieved, turn offthe ignition switch and
proceed with final mounting of the chassis.
1. Connect wiring adapter to existing wiring harness.
2. Connect antenna lead.

~ VM9312HD
'". '~'. ~ '~~H"
3. Carefully slide the radio into the half-sleeve, making
sure it is right-side-up, until it is fully seated and the
spring clips lock it into place.
NOTE: For proper operation of the CD/DVD player, the
chassis
must be mounted within 20· of horizontal. Make
sure the
unit is mounted within this limitation.
4. Attach one end of the perforated support strap
(supplied) to the screw stud on the rear
of the chassis
using the hex nut provided. Fasten the other end
of the
perforated strap to asecure part
of the dashboard either
above or below the radio using the screw and hex nut
provided. Bend the strap
to position it as necessary.
CAUTlONl The rear of the radio must be supported with
the strap to prevent damage to the dashboard from the
weight
of the radio or improper operation due to
vibration.
5. Replace any items you removed from the dashboard.
Final ISO-DIN Installation
FINAL INSTALLATION
1. Remove trim ring.
2. Mount factory brackets on new radio using existing
screws from old radio.
3. Slide radio chassis into dash opening and secure.
iU .'
4. Reinstall dash panel.
FINAL ISO-OIN INSTALLATION
3

VM9312HD ~
WIRING DIAGRAM
* See the Module Connections diagram for more information about
connecting asatellite receiver and an iPod (through the MediaLink).
YELLOW
*MediaLink
RED
WHITE
•Satellite
Receiver
Connections
RED
WHITE
BLUE
RED
WHITE
External PowerAmplifier
~(
~(
~(
YELLOW
Rear Video 2 0
(:) @
Battery
YELLOW
YELLOW
RED
WHITE
Ground
N
Z
X
0>
<
ACC
BAITERYG
YELLOW RearVideo 1
"'==li=====r----r====-:8>-------.:..:.=~0
MZ-TFTTouch Screen
"""==========r---r=====B.LA(jC;;;;KD---_-.:.{S O ld S e:.:p..:.a...:ra..:.te:.:IY:":')-10
"""======CP:"I:':NKc:====r---F====-~~}-- PARKING BRAKE 8
GND
BLACK
"========G=:R=:E=E""N":'IW=H=IT=Eo==r-----,======jll=l!j~~- REVERSE ®
D
HamessCord
Auto antenna control (connect to antenna
control lead & power supply of antenna
amplifier)
Mute (leave open if not connected)
External power amplifier control
Car Phone
,-
Connect to
HD Media Module
(See Module
Connections Diagram)
r
----(:~~ REAR L+ ~~!l=Il===========r--r~G~R~E~E~N~+~=:""~~~111
REAR L- REAR LGREENIBLACK-
Car
4

~ VM9312HD
"~"""" ...t ••
MODULE CONNECTIONS
;----~ -
iPod Nano IPhone
(Music Only)
e
iPod MiniiPodG5
\,'" \
, ~.,' .,
iPodVideo
I
o
tD
o
><
GI
:::I
"
~ 0
:i::E
a= .~
C1"
:z: ftI
a=
CI
:z:
I
I
+""
..
c
::J
..
"'C
CO
..
Q)
I
..
~
*
**
"XM or Sirius satellite tuner (sold separately)
·SAT Cable Kit: JXMC or XMDJEN100 (sold separately)
jLink iPod Cable
(Sold Separately)
5

VM9312HD ~
........
1
2
~) [160]
READY Watts
.. ..
WIDE CLOSE
-----+-1-+-------117
7
3
6 9
4
.. ..
TILT PICTURE
!il!ll3 /~lUmR iiJ3D
···· ••• :.·.~~I·.··:.·.·:·:·:·:·:·:·· t··;;;.·::;;.;;,:::::::::::::·::;;·:::;· ';;:::.;;';::.;;;;'::.:;;;;;:.:;;;::::.::;:;.;;;;';::.;;;::':::;.;;;':;;.:. ·:::::~.i 11-==··················.
(DSP¢DP.~
..
PRESS AUDIO VM9312HD EJECT ~ 16
@ t==~~~~~~1
5 )---+--j-----ti{E)).- \ (!) (I 1 f9)Radl: ~JrB---@15
~ t'"$o~ ~ ~~O'-c--.. 14
~~ ..... jl \ "'~~
o10 @12
CONTROLS AND INDICATORS
Button Operation
1. OPEN
Pressto activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again
to close
the
TFT.
2. WIDEIDISP
Press to adjust the display aspect of the picture to one of two
settings: Full or Normal.
With the monitor closed, press the DISP button
to cycle
through information available on the LCD screen.
3. PICTURE/AS
Press to adjust the Brightness and Contrast. Press the
AUDIO button (5) to move between Brightness
to Contrast.
Turn the rotary encoder (5) to adjust the setting for the
selected option.
Press and holdthe AS button to automatically store strong
radio stations
in the preset channels for the current band.
4. TILTIBAND
Press to activate the tilt function. Use the joystick to make
adjustments while the red tilt icon is flashing. Press once
to
adjust the downward tilt angle of the screen one step at a
time or press and hold
to adjust the angle in acontinuous
motion.
With the monitor closed, press the
BAND button to change
the AM, FM or SAT band.
S.AUDIO
Rotate to adjust the volume. Press and release to enter and/
or confirm audio settings.
6.SRC
Press once to select playing mode.
7. LCD Display
8. MUTE
Press to silence the receiver. Press again to resume previous
volume level.
NOTE: The VM9312HD features Softmute, which will
allow the volume to increase or decrease graduallywhen
the MUTE function Is activated
or deactivated.
6

~ VM9312HD
CONTROLS AND INDICATORS
2
9. IR Remote Control Receiver
10. (.-.J
DVD Mode: Press once to play back the previous chapter/
track.
TUNER Mode: Press once to auto-search for the previous
available radio station.
MENU Mode: Press once to move the cursor to the lelt.
11. ("r J
DVD Mode: Press once for slow forward/slow reverse.
TUNER Mode: Press to go down one frequency step.
MENU Mode: Press once to move the cursor down.
12. RESET
Press to reset system settings to factory default (except the
password and parental lock setting).
13.PauselPlaylEnter
Press to pause or resume piaback or to confirm current
selection.
14. (~J
DVD Mode: Press once to enter the next chapter or track.
TUNER Mode: Press once to auto-search the next available
radio station.
MENU Mode: Press once to move the cursor to the right.
15. (~J
DVD Mode: Press once for fast forward/fast reverse.
TUNER Mode: Press to go up one frequency step.
MENU Mode: Press once to move the cursor up.
16. (~J
Press once for disc insertion/ejection.
Press and holdto reset core mechanism position.
17. TFT Display
5
4 3
........ = e=.= .
(c IU¢> AS
..
.. ..
TILT PICTURE
!il!%!3_ lOma jiJ3.
PRESS AUDIO VM9312HD
@
6 9
7
7
~ .
. F= :~ .
CD SP ¢> DPEI
.. ..
WIDE CLOSE
-----+-+-+----{ 17
<iW [160]
READY Watts

VM9312HD ~
•• ~: • t
REMOTE CONTROL
800
29 000
0000
NOTE: Yourremote control may differ slightly
from the one pictured here. The above diagram is
for illustrative purposes only.
8