JETWAY MI05 Series User manual

MI05 Series
User’s Manual
NO. G03-MI05-F
Revision: 2.0
Release date: August 03, 2022
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

i
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize
pollution and ensure environment protection of mother earth, please recycle.

ii
ENVIRONMENTAL SAFETY INSTRUCTION ....................................................................... iii
USER’S NOTICE ..................................................................................................................iv
MANUAL REVISION INFORMATION...................................................................................iv
ITEM CHECKLIST................................................................................................................ iv
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD ............................................................................ 1
1-2 SPECIFICATION .................................................................................................... 2
1-3 LAYOUT DIAGRAM ...............................................................................................3
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING................................................................................................. 7
2-2 CONNECTORS, HEADERS AND WAFERS...........................................................12
2-2-1 CONNECTORS......................................................................................... 12
2-2-2 HEADERS & WAFERS .............................................................................15
2-2-3 Maximum Voltage & Current Limit..........................................................21
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP................................................................................................. 22
3-2 BIOS MENU SCREEN............................................................................................ 23
3-3 FUNCTION KEYS................................................................................................... 23
3-4 GETTING HELP...................................................................................................... 24
3-5 MEMU BARS.......................................................................................................... 24
3-6 MAIN MENU...........................................................................................................25
3-7 ADVANCED MENU ................................................................................................ 26
3-8 CHIPSET MENU..................................................................................................... 38
3-9 SECURITY MENU .................................................................................................. 41
3-10 BOOT MENU.......................................................................................................... 44
3-11 SAVE & EXIT MENU ..............................................................................................45
TABLE OF CONTENT

iii
Environmental Safety Instruction
Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
0 to 60 centigrade is the suitable temperature. (The figure comes from the request
of the main chipset)
Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from
the welding spots’ that connect components and PCB. Computer should go
through an adaptive phase before it boots when it is moved from a cold
environment to a warmer one to avoid condensation phenomenon. These water
drops attached on PCB or the surface of the components can bring about
phenomena as minor as computer instability resulted from corrosion and oxidation
from components and PCB or as major as short circuit that can burn the
components. Suggest starting the computer until the temperature goes up.
The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher
temperature in the inner of the case.
Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.

iv
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED
OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN
PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AND WE
DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME
WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY
KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA,
INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE
REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE
USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT
INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
2.0 Second Edition August 03, 2022
Item Checklist
Motherboard
Cable(s)
I/O Back panel shield

1
Chapter 1
Introduction of the Motherboard
1-1 Feature of Motherboard
Onboard Intel®Elkhart Lake Series Processor, with low power consumption and
high performance
Support 1* DDR4 3200MHz SO-DIMM, up to 16GB
Support 6* 10/100/1000/2500 Base-TX Ethernet Ports
Support 1* SATAIII (6Gb/s) port
Support 1* PCI Express x1 sideway slot (only for MI05-0XK Series)
1* EXT RS232 (RJ45 type), 2* INT RS232, 1* INT RS232/422/485
Support 1* USB 3.1(Gen.2), 1* EXT USB 2.0, 2* INT USB 2.0, 1* INT HDMI
1* M.2 M-key (2242, SATA/PCIe Gen.3 x2 interface) support NVMe
1* M.2 E-key (2230, USB2.0/PCIe Gen.3 x1 interface)
1* M.2 B-key (3042, USB3.1/PCIe Gen.3 x1 interface) (only for MI05-0X Series)
1* M.2 B-key (3042, USB3.1 interface) (only for MI05-0XK Series)
Support onboard 32GB eMMC (Option MI05-03/03K & MI05-07/07K)
Onboard 1* SIM card slot (along with M.2 B-key)
Support Intel ACPI S3 NI Function
Onboard TPM 2.0 (Option MI05-02/02K & MI05-07/07K)
Support CPU Smart FAN
Support Watchdog Technology

2
1-2 Specification
Spec
Description
Design
Mini-ITX form factor 8 layers; PCB size: 17.0x17.0cm
Embedded CPU
Intel®Elkhart Lake series CPU (TDP 10W)
* for detailed CPU support information please visit our website
Memory Socket
1* DDR4 SO-DIMM slot
Support 1* DDR4 3200MHz SO-DIMM, up to 16GB
Expansion Slot
1* PCIe x1 slot by sideway (PCIE2) (only for MI05-0XK)
1* M.2 B-key (3042, USB3.1 interface) (only for MI05-0XK)
1* M.2 B-key (3042, USB3.1/PCIe Gen.3 x1 interface) (only for MI05-0X)
1* M.2 E-key (2230, USB2.0/PCIe Gen.3 x1 interface)
1* SIM card slot (along with M.2 B-key)
Storage
1* SATAIII (6Gb/s) connector (SATA1)
1* M.2 M-key (2242, SATA/PCIe Gen.3 x2 interface) support NVMe
Onbosrd 32GB eMMC (Option MI05-03/03K & MI05-07/07K)
LAN Chip
Integrated with 6* Intel i225-V 2.5Gigabit LAN chips
Support Fast Ethernet LAN function of providing
10/100/1000/2500Mbps Ethernet data transfer rate
BIOS
AMI Flash ROM
Rear I/O
1* RS232 RJ45 Type COM port for console (RJ45_COM1)
1* USB 2.0 port
1* USB 3.1(Gen.2) port
6* 2.5Gbps RJ-45 LAN ports
Internal I/O
1* 2-pin internal 12V DC-in power connector
1* SATA HDD Power-Out Connector
1* SATAIII Port Connector
1* CPU FAN Connector
1* Front panel LED header (FP_LED1)
1* Front panel header (JW_FP)
1* USB 2.0 header (Expansible to 2* USB 2.0 ports)
3* Serial port headers
(FP_COM2 support RS232/422/485; FP_COM3/4 support RS232)
1* PS/2 keyboard & mouse header

3
1* HDMI port header
1* 8-pin LANLED header (LAN_LED1)
1* 4-pin LANLED header (LAN_LED2)
1* SMBUS header
1* GPIO port header
1* SIM Card Expansion Wafer
1-3 Layout Diagram
Rear IO Diagram
Power LED
HDD LED
RS232 RJ-45 Type COM
Port for Console
USB 2.0 Port
USB 3.1(Gen.2) Port
2.5Gbps RJ-45
LAN Ports (LAN1/2/3/4/5/6)

4
Motherboard Internal Diagram
*Note: 1. SIM card slot (along with M.2 B-key) 2. Sideway PCI Express x1 slot (on MI05-0XK only)
3. M.2 B-Key option has USB/PCIe signal (MI05-0XK B-key only has USB signal)
FP_LED1 Header
DDR4 SODIMM Slot
Internal 12V
Power Connector
LAN_LED1
Header
Serial Port
Headers
（ COM2/3/4 ）
Front Panel
Header
Sideway
PCI Express x1 Slot
CPUFAN
Connector
HDMI Port Header
LAN_LED2
Header
SIM Card Slot
SATAIII Port
Connector
USB 2.0 Header
GPIO Port
Header
SMBUS
Header
SATA
Power-out
Connector
SIM Card Slot
Expansion Wafer
(*SIM)
PS/2 KB & MS Header
BP_LED Port
Top: USB 2.0 Port
Bottom: USB 3.1(Gen.2) Port
2.5Gbps RJ-45 LAN Ports
(LAN1/2/3/4/5/6)
M.2 B-Key Slot (M2B1)
M.2 M-Key Slot (M2M1)
M.2 E-Key Slot (M2E1)
RS232 RJ-45 Type
COM Port

5
Jumper Positions
M2E_PWR
JBAT
JP80P
AT_MODE
M2B_PWR
M2M_PWR

6
Connectors
Connector
Name
RJ45_COM1
RS232 RJ45 Type COM Port Connector for Console
USB31
Top: USB 2.0 Port Connector
Bottom: USB 3.1(Gen.2) Port Connector
LAN1/2/3/4/5/6
2.5Gbps RJ-45 LAN Port Connector X6
SATA1
SATAIII Port Connector
SATAPWR
SATA Power out Connector
CPUFAN
CPUFAN Connector
DCIN1
2-Pin Internal 12V DC–in Power Connector
Headers & Wafers
Header
Name
Description
Pitch
FP_LED1
PIN (1-2): Power LED
PIN (3-4): HDD LED
4-pin Block
2.54mm
LAN_LED1
LAN1/2/3/4 Activity LED Header
8-pin Block
2.54mm
LAN_LED2
LAN5/6 Activity LED Header
4-pin Block
2.54mm
SMBUS
SMBUS Header
5-pin Block
2.54mm
GPIO
GPIO Header
10-pin Block
2.54mm
JW_FP
Front Panel Header
9-pin Block
2.54mm
FP_COM2
RS232/422/485 Serial Port Header
9-pin Block
2.54mm
FP_COM3/4
RS232 Serial Port Header
9-pin Block
2.54mm
PS2KBMS
PS/2 Keyboard & Mouse Header
6-pin Block
2.54mm
FP_USB21
USB 2.0 Port Header
9-pin Block
2.54mm
SIM
SIM Card Slot Wafer
6-pin Block
2.0mm
HDMI1
HDMI Port Header
19-pin Block
2.0mm

7
Jumpers
Jumper
Name
Description
Pitch
JBAT
Pin (1-2): Clear RTC
Pin (3-4): Clear CMOS
Pin (5-6): ME Disable
Pin (7-8): CASE OPEN
8-Pin Block
2.54mm
AT_MODE
ATX Mode/ AT Mode Select
3-Pin Block
2.54mm
JP80P
Set GPIO_CON
2-Pin Block
2.54mm
M2E_PWR
M.2 E-key Power Select
3-Pin Block
2.54mm
M2M_PWR
M.2 M-key Power Select
3-Pin Block
2.54mm
M2B_PWR
M.2 B-key Power Select
3-Pin Block
2.54mm
Chapter 2
Hardware Installation
2-1 Jumper Setting
Pin (1-2) of JBAT (8pin): Clear RTC Pitch=2.54mm
6
4
7
3
5
1-2 Open: Normal(Default)
Pin1
8
2
Pin1
3
5
7
2
4
6
8
1-2 Closed: Clear RTC
JBAT

8
Pin (3-4) of JBAT (8pin): Clear CMOS Pitch=2.54mm
6
4
7
3
5
3-4 Open: Normal(Default)
Pin1
8
2
Pin1
3
5
7
2
4
6
8
3-4 Closed: Clear CMOS
Pin (5-6) of JBAT (8pin): ME Disable Pitch=2.54mm
6
4
7
3
5
5-6 Open: Normal(Default)
Pin1
8
2
Pin1
3
5
7
2
4
6
8
5-6 Closed: ME Disable
JBAT
JBAT

9
Pin (7-8) of JBAT (8pin): CASE OPEN Pitch=2.54mm
6
4
7
3
5
7-8 Open: Normal(Default)
Pin1
8
2
Pin1
3
5
7
2
4
6
8
7-8 Closed: CASE OPEN
Pin (7-8) short:When Case open function pin short to GND, the Case open function was detected.
When used, needs to enter BIOS and enable ‘Case Open Detect’function. Refer to Page-31. In this
case if your case is removed, next time when you restart your computer, a messagewill be displayed on
screen to inform you of this.
AT_MODE (3-pin): ATX Mode/ AT Mode Select Pitch=2.54mm
1
3
1
3
1-2 Closed：ATX Mode Selected;
2-3 Closed：AT Mode Selected.
*ATX Mode Selected: Press power button to power on after power input ready;
AT Mode Selected: Directly power on as power input ready.
AT_MODE
JBAT

10
JP80P (2-pin) :Set GPIO Pitch=2.54mm
Pin1
Pin1
1-2 Closed: GPIO= GPIO Port (Default).
1-2 Open: GPIO=80 Port;
M2E_PWR (3-pin): M.2 E-key Power Select Pitch=2.54mm
3
1
1
3
1-2 Closed:VCC=VCC3
2-3 Closed: VCC=3VSB
JP80P
M2E_PWR

11
M2M_PWR (3-pin): M.2 M-key Power Select Pitch=2.54mm
1
3
1
3
1-2 Closed: VCC=VCC3;
2-3 Closed: VCC=3VSB.
M2B_PWR (3-pin): M.2 B-key Power Select Pitch=2.54mm
1
3
1
3
1-2 Closed: VCC=VCC3;
2-3 Closed: VCC=3VSB.
M2M_PWR
M2B_PWR

12
2-2 Connectors, Headers and Wafers
2-2-1 Connectors
(1) Rear I/O Connectors
* Refer to Page-3 Rear IO Diagram.
Icon
Name
Function
RS232 RJ-45 Type COM Port
Mainly for user to connect external MODEM
or other devices that supports
Serial Communications Interface.
USB 2.0 Port
To connect USB keyboard, mouse or other
devices compatible with USB specification.
USB 3.1(Gen.2) Port
To connect USB keyboard, mouse or other
devices compatible with USB 3.1(Gen.2)
specification. Ports support up to 10Gbps
data transfer rate.
RJ-45 LAN Port
This connector is standard 2.5Gbps RJ-45
LAN jack for Network connection.
(2) RJ45_COM1 (8-pin block): RS232 RJ-45 Type COM Port Connector for
Console
Pin8
Pin1
RJ45_COM1
Pin No.
Definition
1
RTS
2
DTR
3
TXD
4
GND
5
NC
6
RXD
7
DSR
8
CTS
RJ45_COM1

13
(3) SATA1 (7-pin): SATAIII Port Connector
SATA1 is a high-speed SATAIII port that supports 6Gb/s transfer rate.
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
(4) SATAPWR (4-pin): SATA Power Out Connector
Pin 1
+5V
GND
+12V
GND
Warning: Make sure that Pin-1 of compatible SATA Power connector is inserted into corresponding
Pin-1 of SATAPWR connector to avoid possible damage to the board and hard disk driver!
SATA1
SATAPWR

14
(5) CPUFAN (4-pin): CPU FAN Connector
Pin1
GND
+12V Fan Power
Fan Speed
Control
(6) DCIN1 (2-pin) : Internal 12V DC-in power connector
Warning: Find Pin-1 position before connecting power cable to this 2-pin power connector WRONG
INSTALLATION DIRECTION WILL DAMAGE THE BOARD!!
CPUFAN
DCIN1

15
2-2-2 Headers & Wafers
(1) PIN (1-2) of FP_LED1 (4-pin):Power LED Pitch=2.54mm
Pin1
Power_LED-
Power_LED+
HDD_LED-
HDD_LED+
2
3
4
(2) PIN (3-4) of FP_LED1 (4-pin):HDD LED Pitch=2.54mm
Pin1
Power_LED-
Power_LED+
HDD_LED-
HDD_LED+
2
3
4
FP_LED1
FP_LED1