JFA Electronicos VS5HI User manual

VS5HI
VOLTMETER SEUENCER
INSTRUCTION MANUAL

VS5HI VOLTMETER SEUENCER - INSTRUCTION MANUAL
CONGRATULATIONS!
You have just purchased a product with the quality
JFA Electronics, which was developed with
technology advanced and unique design.
Please read the operating instructions and
installation in this guide.
PRESENTATION
The voltmeter and sequencer VS5HI JFA was
developed to perform three functions in the same
equipment they are:
• Low voltage voltmeter to 17V;
• High-voltage voltmeter up to 500V;
• Remote command sequencer.
DESCRIPTION
1 - Selector functions: HOL (Hold) - LIG (ON) - OFF
2 - Voltmeter selector: LOW - HIGH;
3 - Five remote control outputs;
4 - High input voltage (battery bank);
5 - GND;
6 - Remote control input;
7 - Low input voltage (+12V).
1
75
64
3
2

VS5HI VOLTMETER SEUENCER - INSTRUCTION MANUAL
Amplier
1
Amplier
2
Amplier
3
Amplier
4
Amplier
5
Sign in
remote output
the player
Low voltage
up to 17V
High voltage up to 500V
12V 12V
12V 12V
12V 12V
12V 12V
12V 12V
12V 12V
12V 12V
12V 12V
12V 12V
INSTALLATION EXAMPLE

VS5HI VOLTMETER SEUENCER - INSTRUCTION MANUAL
PLAYER
FUNCTION
On
HOL
(Hold) Off
On
LIG
(ON) Off
On
DES Off
VOLTMETER
Stores
lower voltage
On
Off
On
OUTS
On
Off
On
Off
On
Off
FUNCTIONS
VOLTMETER
SEQUENCER REMOTE CONTROL
DIMENSIONS IN MM (WxHxD)
Low Voltage Measurement Maximum 17V
High voltage measuring Maximum 500V
Current at output 150 mA
Low voltage protection <9,5V
against high voltage protection > 17,0V
10x57x17
Function switch:
HOL (Hold) - LIG (ON) - OFF
Function switch:
12V (Low Voltage)
HV (High Voltage)
Recommendations
and comments
1) Due to the risk of shock high voltage, look for a
specialized service to perform the installation of
this equipment.
2) Do not use cables with damaged insulation
cover for this installation. Make sure the cables
are not being pressed at any point of the
installation.
FUNCTION