JiGMO JVR-32 User manual

JVR-32 Voice Recorder
0
JVR-32 VOICE RECORDER
User Manual
[email protected]

JVR-32 Voice Recorder
1
Thank you for purchasing this product. This is
your Quick Start Guide, which tells you about the
basic operations of the recorder. Please read it
carefully before using this product.
1.Precautions
Charging
Please do not use the recorder or leave it in a
location accessible to children during the
charging process.
Protecting Files
Please do not press the power switch to prevent
the current recording from being lost during the
recording process.
Interference
If placed near other electronic devices, the
functions of this device maybe adversely affected.
To prevent this, please keep this recorder away
from such other devices.
Backup

JVR-32 Voice Recorder
2
We recommend backing up your files regularly to
prevent loss of data due to external errors or
operation failure.
Transfer of Data
Do not disconnect the recorder from your
computer during the data transfer process to
prevent data loss.
2.Parts and Controls
1.Headphone jack
2.Record/Save button

JVR-32 Voice Recorder
3
3.Rewind/Previous file button
4.Fast forward/Next file button
5.Volume up button
6.Volume down button
7.Pilot light
8.Screen
9.Pause/Play button
10.Speaker
11.USB port
12.Power switch
13.Expansion CARDS
14.Menu button
3.Charging
The power switch on the recorder must be ON.
Please connect the recorder to your computer via
the USB cable (supplied). Insert the micro USB
end of the cable to the recorder, and the USB end

JVR-32 Voice Recorder
4
to the USB port of a computer which is ON. You
may also use a phone charger.
When the recorder is charging, the screen will
show the battery charge indicator at the top right.
4.Turning Power On
Turn on the power switch and
turn on the recorder.
5.Turning Power Off
Slide down the “Power
switch”, and the recorder is
switched OFF.
Hint:
When the recorder is not in playback mode,
and if there is no activity for 5 minutes, the
recorder will power off automatically. This is the
auto power off function and can be set in the

JVR-32 Voice Recorder
5
menu under “Auto Switch Off”.
6. Record/SAVE
Turn on the
recording switch to
enter recording
mode.
Place the recorder
so that the built-in
microphones face the direction of
the source to be recorded.
The new file will be automatically
recorded as the last
file in the current
folder.
Slide down the
“REC/SAVE”button,
in the direction of
“SAVE”to stop and
save your recording.
7. Play
Press the “ ” key on the side of the device to

JVR-32 Voice Recorder
6
switch between the Recording folder/Music
folder. Press “ ” to play.
Press“ ”or“”button to select the file you
want to playback, and then press “ ” button to
start playing the file.
Press “ ”or “ ”button to adjust the volume.
Press“ ” button to Pause play.
8. “A-B”Repeat Play
In PLAY mode,
press “ ” to select
“A”. Once “A”starts
flashing on the
screen, press this
button again to
select “B”, and then
the segment “A-B”
of the file will start repeating.
Once selected, it will repeat and
play back the A-B interval
Press “ ”again to cancel.
9.Delete
When the recorder is in standby

JVR-32 Voice Recorder
7
mode (not playing a file), select the file you
want to delete, hold down “ ”or “ ”key to
enter.
Press " " or " " buttons to
select “No”/“Yes”/“Delete all”.
Press " " to confirm your choice.
“No”：Cancel the Delete process.
“Yes”：Delete single file.
“Delete all”：Delete all files in
folder.
Press the “ ” button to confirm.
Press “ ”to return standby mode.
Note
Once a file has been erased, you cannot retrieve
it.
10.MP3 Function
Download music to
the root directory of
the machine through
USB.
Press “ ” to enter
the MP3 player

JVR-32 Voice Recorder
8
interface.
Play music just like playing a recording file.
11. Recording Settings
In standby mode, hold down "M" button to enter.
For scrolling through the options, press the
“ ” button to select, press the “M”key to exit.
Press “”to select the recording settings,
press the “ ” to enter.
1) Storage Location
Press " " briefly, then select "memory", "card",
and then press " " to save your recording in
your preferred location storage. Press "M" to
exit.
2) Record type
a. 384KBPS
b. 192KBPS
c. 128KBPS

JVR-32 Voice Recorder
9
d. 64KBPS
e. 32KBPS
3) Recorder Mode (VOR on/off)
a. Normal Mode
b. VOR Mode (Voice Activated Recording)
Note
In VOR mode, if the ambient noise level
exceeds -40dB, the recorder will start
recording. If the ambient noise level
drops below this threshold, it will stop
recording and resume once the
threshold is exceeded. If you want to be
ready to record at short notice, you can
use this feature, keeping in mind the noise
threshold.
4) Recording Monitor: Use this feature for live
monitoring during a
recording. This feature
needs earphones to be
used.
a.Disable
b.Enable
5) Noise Reduction: Here