5
* The MENU PICTURE disappears if no other button is inputted for 7
seconds, or if press MENU button 4 times.
The MENU PICTURE appears
likeside likeleftsideoneifpress the
MENU button one time.
1) CHANNEL : Select CHANNEL item by CH ▲, ▼ button and
fix the CHANNEL by VOL ◀, ▶
2) TV/CATV : Select TV/CATV by CH ▲, ▼ button and fix the
desiredmodebyVOL ◀, ▶.
3) ADD/ERASE : Select ADD/ERASE item by CH ▲, ▼ button and
fixthechannelforADDorERASEbyVOL ◀, ▶.
(IfcanceltheMENUpicture,automaticmemoryfor
added channel, but not for erased channels.)
4) FINE : Select FINE item by CH ▲, ▼ button, adjust for
NO-NOISE condition by VOL ◀, ▶ button ( This function
is used only when the channel is not received properly, so
it does not use for normal condition.)
5)AUTOMEMORY:SelectAUTOMEMORYitembyCH▲, ▼
button and press VOL ▶ button for automatic
channel scanning & memory.
DisplaythecurrentmodeifpressSCANbutton
on remote control unit one time and press again
for automatic memory of channels.
▶ CHANNEL SELECTION
& AUTO MEMORY
CONTROL
TV/CATV TV
ADD/ERASE ADD
FINE ±00
AUTO MEMORY ►
SELECT: ▲▼ ADJUST:◄►
CHANNEL 12