Jinyoung JY-R700 User manual

Wireless Audio System
JY-R700
User Manual
Please read all details of this manual prior to using this device for the proper
use of the product and any error or malfunction prevention.

Content
Introduction
Accessories included ..............................................4
About this manual......................................................5
Battery charging this device ....................................6
Names of components and parts ..................8~9
Getting started
Turning on lights/power .................................... 10 ~11
Listening to music via Bluetooth connection
Pairing the device with the equipment ............ 12~13
Connecting the Bluetooth device paired and playing music 14~15
Automated connection and playing music ....... 16~17
Multi connection with Bluetooth and playing music 18~19
Making phone calls with the Bluetooth equipment
Placing outgoing calls/ taking incoming calls .........20~21
Listening to stereoscopic music via the Bluetooth dual play
Dual play ...........................................................22~23
Listening to external source of music
Connecting external device ..............................24~25
Trouble shooting .........................................26~27
Product specication ................................28~29
Cautions .........................................................30~32
Product Warranty .......................................36~37

4
Introduction
Please check the packaged items inside and carefully read this manua l
Accessories included
Data cable User manual
Main component (JY-R700)

5
About this manual
● Operation
iPhone you see in this manual is
intchangeable web iPod touch or iPad.
● Figures
Figures and descriptions may not be congru
ent with actual items.
Any typographical errors or incorrect information discov-
ered within this manual maybe changed by JINYOUNG
G&T without prior notice. Pertinent wireless equipments
may experience transmission problems while being oper-
ated. Services related to the safety of human lives cannot
be delivered.

6
Introduction
Please check the packaged items inside and carefully read this manual
Battery charging this device
Please use the USB cable supplied with to connect
with the device and the AC adapter for charging bat-
teries for the initial use of this device.
● Red LED indicates that this device is being charged,
purple LED indicates 80% charged, and blue LED
indicates full batteries.
●It takes approximately 5 hours to fully charge batter-
ies if the device had been turned off, and approxi-
mately 7 hours if the device is on.
Charge Signal
● When batteries are low, red LED and alarm will go
off every minute to indicate low batteries.
● Failure to charge batteries at this time may cause
the power to go off.
Battery Signal
● The LED signal at the bottom indicates battery sta-
tus in different colors.
Battery status
LED signal Blue LED blinks Purple LED blinks Red LED blinks
Battery status
High Medium Low
AUX USB Charge Signal

7
※ Cautions
● The device may charge faster than usual or may not charge at
all in places where the temperature is extremely high or low.
● The device must be charged every six months for performance
maintenance.
● Rechargeable batteries have limited life. Their capacity will incre-
mentally decline as per the frequency of use and time consumed.
● Rechargeable batteries have a different life depending on how
they are stored, used, and where they are used.
● The use of the device running on batteries in the AC adapter
connection may each affect battery life and the sound volume
and quality.
● The device power may go off regardless of battery status, subject
to volume and lighting conditions.
● USB (USB. POWER)
Use the USB cable supplied with to con
nect the AC adapter to charge batteries.

8
Names of components and parts
Please carefully study the name and function of each component and part
①
②
③
④
⑦
⑩
⑤
⑧
⑪
⑥
⑨

9
① Power/Volume/Call/Light Switch
● Power
-Press : Turns the device on or off.
-Press and hold : Disconnects the Bluetooth device.
Start chime goes off when the device is turned on, and
the end chime goes off when the device is turned off.
● VOLUME +/ -
Adjusts volume level when music is played.
● Call
Takes incoming phone call on speaker if pressed.
● Light +/-
Adjusts light contrast or turns on light if pressed.
② Microphone
③ Mood light
④ AUX connection termina
connects external device via the 3.5mm stereo plug.
⑤ DC IN
connects the mobile phone AC adapter.
⑥ Charge signal
⑦RWD Button
⑧PLAY/PAUSE Button
⑨FWD Button
⑩BT Button
⑪EQ Button
Names of components and parts
Please carefully study the name and function of each component and part

10
Getting Started
Please turn on the device after reading all details of this manual prior to using this device
Turning on lights/power
1. Switch on
Press the dial knob of the power switch for two sec
onds. The device will turn on after the start chime.
Then the device can play music.
2. Switch off
Press the dial knob of the power switch for ve sec
onds. The device will turn off after the end chime.
Power save mode
● The product will automatically turn off to save power if
there is no entry signal of any external equipment for
20 minutes as unpaired.
● Press the dial knob at the top of the speaker if the
speaker is automatically turned off. (Press the dial
knob button at the top of the speaker for ve seconds
to turn the power off. Press for two seconds again to
turn it back on.)
Auto standby mode
●The auto standby mode is activated as follows. (De-
fault) The equipment will automatically turn off if there
is no device connected to AUX or Bluetooth for 20
minutes.

11
Light contrast mode
Contrast may be adjusted if the device is turned on.
1. Click the dial knob once.
2. Turn clockwise or counterclockwise to adjust con-
trast.
3. Turn the dial knob to achieve the contrast desired,
which will be maintained until the power is switched
off. (Click the dial knob button once each time to
“Adjust volume → Adjust mood lighting →Adjust
volume mode.” Press the button to adjust contrast
or volume of the mode desired.)
Adjust and Activate Light Contrast
● Light contrast is automatically activated for long hours
if the device is connected with Bluetooth or AUX.
● Light is activated if the device is not connected with
Bluetooth or AUX.
1. Click the dial knob once to prompt light setting when
the power is on.
2. Turn the dial knob to achieve the contrast desired.
3. The light will stay activated without interruption
thereafter.

12
Music can be played wireless from Bluetooth compatible devices
Pairing the device with the equipment
The device must be registered with the equipment if the
Bluetooth device is connected with equipment for the
rst time. This process is called “pairing.” The follow-
ing process need not be repeated after registration is
completed.
Easy registration
1) Switch on the speaker.
● When the speaker is set to search mode, LED at
the bottom of the speaker will blink twice every two
seconds.
2) Search Bluetooth menu and new equipment on the
mobile phone.
● Select and register ‘JY-R700(XXX)’ from the
searched device list.
※Note: Speaker is the last three digits of the Blue
tooth address. For example, if the Bluetooth ad
dress is 9C:20:98:4A:F0:85, then that will corre
spond to “JY-R700(085).”
3) Enter four zeros when asked for PIN during the
registration process.
● Some mobile phones may skip the PIN entry step.
● If connection is completed via hands-free or speaker
connection, or auto completed, there is not a prob-
lem.
4) Manual registration is required if registration with
another equipment is needed.
● The speaker will automatically turn off if connection
with mobile phone is not made within 20 minutes.
Listening to music via Bluetooth connection

13
Manual Registration
For re-registering speaker and registering with other equipments
1) Press the BT button on the speaker when the power is on.
● The device will set to the speaker search mode, and the
blue LED will blink.
2) Repeat steps 2 through 4 of the “Easy Registration” process.
● If the device’s pairing information is deleted, pairing must
be executed again to reconnect.
※ Note
Please note that some devices may not register.
Listening to music via Bluetooth connection

14
Connecting the Bluetooth
device paired and playing music
If the equipment is connected with another device
via Bluetooth connection, that connection will be
terminated before connecting with a new device
desired.
1. Press the dial knob button to switch on the device.
(For registering the Bluetooth speaker with mobile
for the rst time, press the BT button at the bottom
of the speaker to search and register the device.)
2. Execute the Bluetooth connection.
● Turn on the Bluetooth function and select “JY-
R700.”
● Signal will blink in blue if connection is estab-
lished, and the device will activate the Bluetooth
connection chime.
● If the device is the latest device connected via
Bluetooth, switching on this equipment will acti-
vate auto connection with the connecting device
via Bluetooth.
3. Play music on the connected device.
4. Turn the dial knob switch clockwise or count-
er-clockwise to adjust volume.
※ Caution
Do not use high volume by turning the knob clock-
wisely to avoid hearing impairment. Warning chime
will go off at the highest volume level.
Connect Bluetooth and Play

15
※ aptX HD(24bit) is a wireless Bluetooth
technology that delivers CD-quality audio expe
rience while preventing acoustic loss. It em
powers a very clean and gentle music and mov
ie watching experience.
Note : It automatically activates only on mobile
phones or audio equipments that sup-
port aptX HD.

16
Auto connect and play music
● Mobile phone connection will terminate if the speak-
er is switched off. If the power is switched back on
within the reach of transmission, the connection will
automatically re-establish.
● Select ‘JY-R700(XXX)’ from the mobile phone’s
Bluetooth menu to connect second mobile phone.
Out of Reach
● Connection with mobile phone will terminate if the
speaker is set apart approximately 10 meters away
from the mobile phone for the weak transmission. If
the speaker returns to the proximity within 5 minutes
therefrom, connection will automatically re-estab-
lish.
※ Note : If connection is lost, LED will blink and the
loss chime will activate every 30 seconds. If auto
connection is not made, short press the Play/Pause
button at the bottom of the speaker to manually con
nect.
● If the speaker is switched on, search the mobile
phone previously registered to attempt auto connect.
※ Note : If auto connection is not made, attempt to
connect from your mobile phone, or delete registra
tion list to re-register.
Connect Bluetooth and Play Music

17
Audio Streaming
● Play : Short press the Play/Pause button.
● Pause : Short press the Play/Pause button while playing
music.
● Next song : Short press the FWD switch.
● Previous song : Short press the RWD switch.
Equalizer (EQ)
● Press the EQ button to change to the
equalizer mode while playing music.
The following sequence will initiate if the
button is repeatedly pressed:
Normal → PWR Boost → Normal

18
Multi Connect with Bluetooth
and Play Music
You can Bluetooth connect with two mobile equip-
ments simultaneously and play music on the selected
equipment.
Muti Connection
1) Refer to the manual registration procedures to
register and connect one of the two mobile phones
equipped with Bluetooth function.
2) Refer to the ‘manual registration’ procedures to
connect from the other mobile phone. This mobile
phone will become the master mobile phone.
3) Reconnect with the mobile phone initially regis-
tered and connected. This mobile phone will be-
come the secondary slave mobile phone.
※Note: If the speaker is connected with two mobile
phones simultaneously, the relevant function
will activate with the master mobile phone.
Connect Bluetooth and Play Music

19

20
Placing outgoing calls /
taking incoming calls
Placing outgoing calls
● Placing outgoing calls from mobile phone will auto-
matically initiate calls on speaker.
Taking / ending incoming calls
● Press dial knob to take or end incoming calls.
● Ring tone will go off on the speaker if there is an
incoming call.
Call Switch
● Press dial knob for 2 seconds while on a call to
switch calls.
(Mobile phone → Speaker → Mobile phone)
Call Waiting
● If there is another incoming call while you are on
a call, press the FWD button at the bottom to end
the existing call and take the new incoming call. If
there is another incoming call while you are on a
call, press the Play button to put the existing call on
wait and take the new incoming call. Press the Play
button again to switch back and forth.
● Short press the Call button to end the call, or end
both calls simultaneously. However, you can set
these features under the mobile phone’s setting.
※ Note: Inquire with your carrier on the ‘Call Waiting’
auxiliary service.
Making Phone Calls with Bluetooth Equipment
You can make phone calls from Bluetooth devices